- Product Details
- Shipping and Returns
- The BPZ Promise
- Why Bulletproof Zone?
The Caliber Armor AR550 Level III+ Steel Body Armor Package pairs two AR550 multi-curve steel hard armor plates with the Condor Modular Operator Plate Carrier (MOPC) Gen II. The AR550 plates are NIJ Listed under STANDARD-0101.06 Level III and independently tested to special threats, including M855 green-tip rounds, earning a Level III+ rating. Available in 10x12 and 11x14 sizes, with Shooters Cut or SAPI Style Cut geometry, and a choice between Advanced PolyShield anti-spall coating or Standard Coating. Package weight runs from 19.5 lbs (two 10x12 Shooters Cut, PolyShield) to 23 lbs (two 11x14 Shooters Cut, PolyShield).
Who this is for
- Law enforcement officers: the MOPC sees wide adoption across U.S. departments and accepts both 10x12 and 11x14 plate sizes with room to configure soft armor side panels.
- Home defense and preparedness-minded civilians: multi-hit-rated AR550 steel delivers repeatable protection at a price point that makes a full plate-and-carrier setup accessible.
- First responders and security professionals: the multi-curve ergonomic geometry and adjustable cummerbund (40–48 in.) allow all-day wear without sacrificing coverage.
Ballistic performance
AR550 is a hardened abrasion-resistant ballistic steel that Caliber Armor has worked with since 2012. These plates stop multiple projectile hits and carry a Level III+ special-threat rating by defeating M855 (62-grain FMJ steel-core, 5.56x45 NATO) rounds in addition to all standard NIJ Level III threats. The PolyShield variants are NIJ Listed under STANDARD-0101.06 Level III. Both PolyShield and Standard Coating variants are tested to Level III and special threats.
Fragmentation from steel plate impacts is a real consideration. The Standard Coating protects against rust and the elements. The Advanced PolyShield coating is a purpose-formulated anti-spall compound applied to the strike face; PolyShield significantly reduces fragmentation risks after bullet impact. Caliber Armor strongly recommends the PolyShield coating for all steel plate setups.
Plate geometry and curve
Every AR550 plate ships in a single ergonomic multi-curve profile produced in one press step. Caliber Armor's proprietary pressing process achieves the same curvature profile seen in multi-curve ceramic armor without the structural weakening that can result from multiple sequential bends. The Shooters Cut removes material from the upper corners to reduce shoulder interference and overall weight while retaining coverage over the vital organs. The SAPI Style Cut follows the familiar military plate outline for shooters who prefer that geometry.
Condor MOPC Gen II carrier
The Condor Outdoor Modular Operator Plate Carrier (MOPC) Gen II is the included carrier. It accepts Caliber Armor AR550 plates in 10x12 and 11x14, as well as any other ESAPI-format plates up to 10.25x13.25 inches. The cummerbund is adjustable from 40 to 48 inches (measured around the navel) and includes built-in soft armor pockets sized for CaliberX Level IIIA soft armor side panels — a mobility-forward alternative to hard side plates. If you prefer to run hard side plates, the VAS Side Plate Inserts are required and sold separately.
The MOPC Gen II does not have integrated side plate pockets. For a scaled-down loadout, the internal waist strap can replace the full cummerbund. The carrier ships with removable low-profile shoulder pads, adjustable shoulder straps, MOLLE webbing on all surfaces, a front map pocket with snap and hook-and-loop closure, a breathable 3D mesh liner, side release buckles, and an emergency drag handle.
Sizing this package
This is a one-size-fits-most package. The 10x12 plate fits most individuals. To verify plate size, measure from the bottom of your jugular notch to approximately 2–3 inches above the navel (plate height), then nipple to nipple (plate width). The cummerbund range of 40–48 inches accommodates a broad range of torso sizes. Contact us if you need help confirming fit before ordering.
Specifications
- Plate material: AR550 abrasion-resistant ballistic steel
- NIJ listing: NIJ Listed under STANDARD-0101.06 Level III (PolyShield variants); tested to Level III and special threats (both coatings)
- Threat rating: Level III+ — defeats M855 and all standard NIJ Level III threats
- Multi-hit rated: Yes
- Coating options: Advanced PolyShield anti-spall coating (recommended) or Standard Coating
- Available plate sizes: 10x12 in., 11x14 in.
- Available cuts: Shooters Cut, SAPI Style Cut
- Curve profile: Ergonomic single-press multi-curve
- Package weight — 10x12 (2) Shooters Cut, PolyShield: 19.5 lbs
- Package weight — 10x12 (1) Shooters / (1) SAPI, PolyShield: 20.5 lbs
- Package weight — 10x12 (2) SAPI Style Cut, PolyShield: 21 lbs
- Package weight — 11x14 (2) Shooters Cut, PolyShield: 23 lbs
- Package weight — 10x12 (2) Shooters Cut, Standard Coating: 18.5 lbs
- Package weight — 10x12 (1) Shooters / (1) SAPI, Standard Coating: 19.5 lbs
- Package weight — 10x12 (2) SAPI Style Cut, Standard Coating: 20 lbs
- Package weight — 11x14 (2) Shooters Cut, Standard Coating: 22 lbs
- Included carrier: Condor Outdoor MOPC Gen II
- Carrier cummerbund range: 40–48 in. (measured at navel)
- Carrier plate acceptance: 10x12 and 11x14 Caliber Armor AR550; ESAPI-format plates up to 10.25x13.25 in.
- Side plate pockets (integrated): Not included on MOPC Gen II — VAS Side Plate Inserts required (sold separately)
- Country of manufacture — plates: Louisville, Kentucky, U.S.A.
- Country of manufacture — carrier: Imported
Fit and carrier compatibility
The MOPC Gen II accommodates 10x12 and 11x14 Caliber Armor AR550 plates and any ESAPI-format plate up to 10.25x13.25 inches. The adjustable cummerbund (40–48 in.) and shoulder straps give a workable fit range for most adult torso sizes. The cummerbund soft-armor pockets accept CaliberX Level IIIA side panels for lateral coverage without adding hard-plate weight. To run hard side plates, add the VAS Side Plate Inserts separately. Contact us before ordering if your torso measurements are close to the cummerbund limits.
Frequently asked questions
What rounds does the AR550 Level III+ plate stop?
These plates defeat all standard NIJ Level III threats and the M855 (62-grain FMJ steel-core, 5.56x45 NATO) special threat round. The Level III+ designation reflects that additional special-threat testing beyond the NIJ Level III standard. Multi-hit performance is rated and tested.
Are these plates NIJ Certified?
Yes. The PolyShield variants are NIJ Listed under STANDARD-0101.06 Level III. Both PolyShield and Standard Coating configurations are tested to NIJ Level III and special threats. The NIJ Compliant Products List at nij.ojp.gov is the authoritative source for current listing status.
What is the difference between PolyShield and Standard Coating?
Standard Coating protects the steel from rust and corrosion. PolyShield is a purpose-formulated anti-spall compound that significantly reduces bullet fragmentation risk after impact — a known consideration with steel armor. Caliber Armor strongly recommends PolyShield for any wearable steel plate setup.
Does the MOPC Gen II have integrated side plate pockets?
No. The MOPC Gen II does not have integrated side plate pockets. The cummerbund's built-in soft armor pockets accept CaliberX Level IIIA soft armor side panels. To run hard side plates, you need the VAS Side Plate Inserts, sold separately.
What is the difference between Shooters Cut and SAPI Style Cut?
Shooters Cut removes material from the upper plate corners, reducing weight and shoulder interference while maintaining vital-organ coverage. SAPI Style Cut follows the military SAPI plate outline. Both cuts are available in 10x12 and 11x14. The Shooters Cut is the more common choice for civilians and off-duty carry.
Can this package be shipped to my state?
This package cannot be shipped to New York or Connecticut due to state body armor restrictions. It is subject to U.S. export regulations (EAR/ITAR). Under 18 U.S.C. § 931, anyone convicted of a federal felony crime of violence is prohibited from purchasing or possessing body armor.
Bulletproof Zone will ship orders as soon as possible. For example, if you purchase three items, they will be shipped to you based on lead time and availability. This way you get as much of your order as soon as possible, which means that your order may come in separate packages, especially if you order products from different manufacturers.
We will bear the shipping cost for products returned because of product defect, misrepresentation, or false description. Afterward, we will initiate a full reimbursement should you decline an offer to replace the item with the same item of equal value and assured quality.
Order Confirmation:
As soon as you place your order with Bulletproof Zone, you will receive an order confirmation e-mail. This means that your order has been logged in our system and your credit card has been pre-authorized for the purchase. Afterward, we contact our suppliers to confirm the availability of the product you are ordering for immediate shipment. If your item is on backorder or unavailable, we will cancel the pre-authorization and duly inform you via e-mail.
Order Shipment:
Orders are shipped within five business days from the date of your order unless specified otherwise on the product page. The product page will contain the most accurate estimate on shipping and lead times. Shipping and lead times provided on the product page are our best estimates based various factors including order volume, information from our manufacturer, raw material fluctuations, etc., and may vary due to these factors.
You will receive an email containing the tracking information of your order after the order has been shipped to your location. If you do not receive tracking information from us within seven business days of the lead time specified on the product page, feel free to follow up with us at orders@bulletproofzone.com.
Bulletproof Zone is not responsible for lost or stolen packages. A tracking number will be provided when the package is shipped. It is the buyer’s responsibility to provide a safe place to receive mail. Once an item has been marked as delivered by the carrier, the seller is not responsible should that item go missing.
Some of our products are carried by manufacturers in various countries. Due to the nature and cost of the products that Bulletproof Zone sells, you may be charged additional import duties upon delivery. Our support team can help in investigating abnormally high import duty charges but we are unable to cover the cost of any import duties.
Damages:
We take full responsibility for any obvious damage to your product caused by wrong packaging or delivering an already defective product. Please inspect the packaging of your item(s) when they arrive, if you notice any damage, you should document it when signing for delivery. If the item(s) contained in the package arrives damaged, please send photos to support@bulletproofzone.com, and we will process an insurance claim on your behalf.
Returns and Cancellation Policy:
We back all our products with a customer satisfaction guarantee, so we created a fair return and cancellation policy.
All sales are final. No Refunds, No Cancellations. In most cases, once the order is processed, it is final and not cancellable. We may allow exceptions due to an order error or wish to return your order after delivery for any reason other than a product defect or misrepresentation. Any cancellation request is subject to an administration and cancellation fee equal to 10% of your order with a minimum of $35, whether order shipment is successful or not.
All sales are final on all closeout items and for custom manufactured bulletproof clothing once the manufacturing process has begun or not returnable unless there is a product defect or misrepresentation. Applicable to brands such as MC Armor, Israel Catalog, BulletBlocker, Tacticon Armament, Wonder Hoodie, and others.
Before returning any product, you MUST obtain a return authorization from our customer service representative. We can only process AUTHORIZED returns for items.
To make a Return or Exchange:
- Obtain authorization for return or exchange by emailing us at support@bulletproofzone.com explaining the reason for the return or exchange.
- Please use or indicate your order number as attention
Return or exchanges request submission must be within 14 calendar days upon receipt of shipment unless noted otherwise on the product description page. Your return must be in original packaging and unused.
We encourage using USPS flat-rate shipping in returning products to receive a shipping expense refund. Buyers must ensure all returned parcels delivery receipt AND signature confirmation. We highly recommend insuring your parcel as we cannot issue a refund for an item that we do not receive back should it get lost/damaged during transit.
Refunds:
Should an item be returned because it was defective, misrepresented, not as described, etc., Bulletproof Zone will issue a full refund and will reimburse the customer for all shipping expenses associated with the return.
Please allow 5-10 business days from the time the item is received to process a refund. Refunds will only be issued to the original credit card that you use when placing your order.
We stand behind our products 100%!
By purchasing any of our items, the buyer certifies they have read and agree to our shipping, return, and privacy policies.
The Bulletproof Zone Promise
When you buy body armor, you're buying your safety. We don't take that lightly. Here's what every order from Bulletproof Zone includes.
1. Authorized dealer of every brand we carry
Every plate, vest, and carrier we ship comes from the manufacturer directly to our warehouse. We don't sell gray-market product, surplus, or returns. That means factory-fresh stock, the full manufacturer warranty, and real after-sale support — the kind only an authorized dealer can offer.
We maintain authorized-dealer relationships with America's leading body armor brands, including Spartan Armor Systems, AR500 Armor, RMA Defense, Shellback Tactical, Caliber Armor, DFNDR Armor, Protection Group Denmark, BulletSafe, BulletBlocker, and over 40 more.
2. Best price, guaranteed
If you find a lower price at another authorized dealer of the same product within six months of your purchase, we'll refund the difference.
Why the "authorized dealer" requirement? Because gray-market and surplus armor may not be genuine, may have a compromised supply chain, and almost never comes with a manufacturer warranty. We won't price-match against products that may not actually protect you.
3. Free fitment consultation
Body armor only protects you if it fits. Email us a photo and your measurements before you order, and one of our specialists will help you size your carrier and plates correctly — at no charge, no obligation.
4. Trusted by thousands of customers
Bulletproof Zone has been a trusted authorized dealer of America's leading body armor manufacturers for over five years. We have over 4,000 verified Trustpilot reviews from real customers across all 50 states.
Price Match Guarantee — Terms
- You must have purchased the item from our website before requesting the price match.
- Discounted items and "free with purchase" items are not eligible.
- The item must be in stock on the competitor's website at the time of your request.
- The price match is valid for six months from the date of your purchase.
- The competitor must be an authorized dealer of the product. Auction sites (eBay, Overstock), discounters, and gray-market resellers do not qualify.
- The competitor must operate an online store. Brick-and-mortar-only retailers do not qualify.
- Price match applies to the item price plus shipping. Sales tax is excluded.
To request a price match, email us a link to the product on our site and the same product on the competitor's site within six months of purchase. We'll process the refund.
Why Bulletproof Zone?
At Bulletproof Zone, we are passionate about protecting lives. Every piece from our catalog is designed and rigorously tested to provide the highest quality of protection you need from firearms, explosives or even close quarters combat.
We’ve partnered with various manufacturers that operate within the United States under a strict set of guidelines both on a national and corporate level so that when you shop with us, you will be able to select from the highest quality body armor, ballistic plates and tactical gear available on the market.
Whether you are a military service member looking to find your own gear, a professional that operates in the security field, or an avid firearms enthusiast that capitalizes the importance of safety when shooting, our tactical gear will provide you the level of protection you need.
Any questions or concerns? Please call us at (408)-909-4938 or email us at support@bulletproofzone.com and a member of our professional support team will be in touch with you as soon as possible.