- Product Details
- Shipping and Returns
- Price Match
- Why Bulletproof Zone?
RMA Defense Level III+ Body Armor (RF2) Multi-Curve Defeats m855a1
***Manufacturer's Notes: Lead time 8-10 weeks!!
***Due to the life-saving nature of this product, ALL SALES ARE FINAL.
RMA has upgraded its popular Level III+ body armor plate to create an all new Generation 2 version defeats multiple m855a1 rounds with ease, yet remains lightweight and affordable, with a thinner profile than the previous. Not only is it multi-hit rated to defeat the m855a1 round but it’s also been tested to the upcoming NIJ .07 RF2 standard. This is without a doubt, the new standard in the Level III+ body armor protection. But what else would you expect from RMA?
RMA’s Level III+ body armor plates (models #1091-1094 Gen2) have a ceramic body armor strikeface and UHMWPE build that’s specifically tested to meet the new standards set forth by the National Institute of Justice. And with RMA’s III+ body armor plates, there’s no confusion to what Level III+ (RF2) ceramic body armor should be. After all, the standard for III+ (RF2) plates is the ability to defeat the m855 green tip, xm193, 7.62×39 MSC and the M80 NATO round, which this body armor plate does with flying colors. But we’ve taken it further with its ability to defeat the m855a1.
If you’re looking for a lightweight ceramic body armor plate that is affordable in price, yet sets the standards in ballistic performance, this plate is for you.
What is RF2?
The upcoming standard set forth from the National Institute of Justice (NIJ) will implement a new ballistic rating system for hard and soft armor. When the new standards for armor are officially released, RF1 (Level III), RF2 (Level III+) and RF3 (Level IV) will be the hard armor names to replace the current ratings of Level III, Level IV, etc. (Level III+ was never an official compliance standard, previously).
But the differences in the ratings go far beyond the nomenclature. Under the current level III standard, a plate must defeat 6 rounds of M80 Steel while also boasting a back face deformation of less than 44mm. Because of that, many companies would rate their armor plates as Level III+ simply because it defeated what they personally deemed was a more threatening round than a M80 NATO Steel projectile. Many companies would say their plate could defeat a single round of m193, 7.62×39 msc or m855 and boast that their plate was a Level III+ or Level III++ despite the fact that their plates haven’t even been tested to defeat six (6) M80 NATO projectiles – the level III requirement.
However, under the new standard, RF1 plates (previously Level III) must now defeat three (3) M80 NATO Steel rounds, three (3) 7.62 x 39 msc AND three (3) m193 BT to earn its rating. If a plate cannot defeat those rounds while also boasting a BFD of less than 44mm, they will not even be considered for the RF2 rating (previously Level III+). So you MUST pass RF1 to have a chance to become an RF2 plate. Once the plate passes the RF1 testing, more plates must be submitted for further testing, which will also include defeating three (3) rounds of m855 as well.
At RMA, we have created this next generation plate that has not only passed RF1 and RF2 testing, but additionally defeats the m855a1 round. Here is the official RF1 and RF2 testing report for this plate. Going forward, a company will have to prove that they can defeat all of those rounds. And RMA is the first company to do so.
| RF1 must defeat: | Three (3) M80 NATO Steel (149 grain) | 2780 ft/s |
| Three (3) 7.62x39mm MSC | 2380 ft/s | |
| Three (3) 5.56mm M193 (56 grain) | 3250 ft/s | |
| RF2 must defeat (All of the Above, PLUS): | Three (3) 5.56mm M855 (62 grain) | 3115 ft/s |
| RF3 must defeat: | One (1) to Three (3) 7.62×63 M2AP | 2880 ft/s |
Plate Carrier Compatibility
RMA’s multi-curve Level III+ body armor plates pair perfectly with the Crye JPC 2.0. If the size medium body armor plate is the right size for you, then you’ll want to pair it with the medium JPC 2.0. If you need a large armor plate, then the size large JPC 2.0 will be what you’re looking for. However, if the Crye JPC 1.0 is the plate carrier you’d like to pair with these Level III+ armor plates, then we suggest a carrier that is one size larger than the plate. For example, if you want a medium III+ body armor plate, then you’ll want to pair it with the JPC 1.0 size large. RMA’s Level III+ body armor plates are also compatible with the Shellback SF plate carrier. Just like the JPC, you’ll want to pair the size of the SF carrier to the size of the body armor plate.
You can also size these plate to fit with the 0331 Tactical Tailwind plate carrier as well as the 0331 Tactical Sierra plate carrier as well. Size medium and large plates fit into the M/L size carrier, while the extra large plate fit into the L/XL plate carrier version with ease.
Details:
- Stand Alone Body Armor
- Full Edge-to-Edge Protection
- 8.75″ W x 11.75″ H – 4.9 lbs. (Size Small)
- 9.5″ W x 12.5″ H – 5.6 lbs. (Size Medium)
- 10.25″ W x 13.25″ H – 6.4 lbs. (Size Large)
- 11.00″ W x 14.00″ H – 7.0 lbs. (Size XL)
- Warranty: 5 Year Manufacturer’s Warranty
- Armor Shape: Multi-Curve
- Armor Cut: SAPI/ESAPI-Cut
- Thickness: 1″ (+/- .125″ tolerance)
- Armor Build: Ceramic/Polyethylene composite
- 600 Denier Water Resistant Cover
- NIJ 0101.07 RF2 Tested
- Free Incident Replacement (If our armor saved your life, please let us know!)
- Made in Centerville, IA – USA
PLEASE NOTE THAT BY PLACING AN ORDER YOU AGREE TO COMPLY WITH ALL LOCAL, STATE, AND FEDERAL LAWS REGARDING BODY ARMOR.
18 U.S. Code § 931.United States law restricts possession of body armor for felons convicted of a crime of violence (as defined in 18 U.S. Code § 16). Many U.S. states also have penalties for possession or use of body armor by felons. By purchasing body armor from RMA Armamant, Inc. or employees of RMA Armament, Inc., you are certifying that you have not been convicted of any crime that would restrict you from being able to purchase or possess body armor under any Federal or State laws.
***DUE TO THE LIFE-SAVING NATURE OF THIS PRODUCT, ALL SALES ARE FINAL***
Bulletproof Zone will ship orders as soon as possible. For example, if you purchase three items, they will be shipped to you based on lead time and availability. This way you get as much of your order as soon as possible, which means that your order may come in separate packages, especially if you order products from different manufacturers.
We will bear the shipping cost for products returned because of product defect, misrepresentation, or false description. Afterward, we will initiate a full reimbursement should you decline an offer to replace the item with the same item of equal value and assured quality.
Order Confirmation:
As soon as you place your order with Bulletproof Zone, you will receive an order confirmation e-mail. This means that your order has been logged in our system and your credit card has been pre-authorized for the purchase. Afterward, we contact our suppliers to confirm the availability of the product you are ordering for immediate shipment. If your item is on backorder or unavailable, we will cancel the pre-authorization and duly inform you via e-mail.
Order Shipment:
Orders are shipped within five business days from the date of your order unless specified otherwise on the product page. The product page will contain the most accurate estimate on shipping and lead times. Shipping and lead times provided on the product page are our best estimates based various factors including order volume, information from our manufacturer, raw material fluctuations, etc., and may vary due to these factors.
You will receive an email containing the tracking information of your order after the order has been shipped to your location. If you do not receive tracking information from us within seven business days of the lead time specified on the product page, feel free to follow up with us at orders@bulletproofzone.com.
Bulletproof Zone is not responsible for lost or stolen packages. A tracking number will be provided when the package is shipped. It is the buyer’s responsibility to provide a safe place to receive mail. Once an item has been marked as delivered by the carrier, the seller is not responsible should that item go missing.
Damages:
We take full responsibility for any obvious damage to your product caused by wrong packaging or delivering an already defective product. Please inspect the packaging of your item(s) when they arrive, if you notice any damage, you should document it when signing for delivery. If the item(s) contained in the package arrives damaged, please send photos to support@bulletproofzone.com, and we will process an insurance claim on your behalf.
Returns and Cancellation Policy:
We back all our products with a customer satisfaction guarantee, so we created a fair return and cancellation policy.
All sales are final. No Refunds, No Cancellations. In most cases, once the order is processed, it is final and not cancellable. We may allow exceptions due to an order error or wish to return your order after delivery for any reason other than a product defect or misrepresentation. Any cancellation request is subject to an administration and cancellation fee equal to 10% of your order with a minimum of $35, whether order shipment is successful or not.
All sales are final on all closeout items and for custom manufactured bulletproof clothing once the manufacturing process has begun or not returnable unless there is a product defect or misrepresentation. Applicable to brands such as MC Armor, Israel Catalog, Masada Armor, BulletBlocker, Tread Armament, Talos Ballistics, Wonder Hoodie, and others.
Before returning any product, you MUST obtain a return authorization from our customer service representative. We can only process AUTHORIZED returns for items.
To make a Return or Exchange:
- Obtain authorization for return or exchange by emailing us at support@bulletproofzone.com explaining the reason for the return or exchange.
- Please use or indicate your order number as attention
Return or exchanges request submission must be within 14 calendar days upon receipt of shipment unless noted otherwise on the product description page. Your return must be in original packaging and unused.
We encourage using USPS flat-rate shipping in returning products to receive a shipping expense refund. Buyers must ensure all returned parcels delivery receipt AND signature confirmation. We highly recommend insuring your parcel as we cannot issue a refund for an item that we do not receive back should it get lost/damaged during transit.
Refunds:
Should an item be returned because it was defective, misrepresented, not as described, etc., Bulletproof Zone will issue a full refund and will reimburse the customer for all shipping expenses associated with the return.
Please allow 5-10 business days from the time the item is received to process a refund. Refunds will only be issued to the original credit card that you use when placing your order.
We stand behind our products 100%!
By purchasing any of our items, the buyer certifies they have read and agree to our shipping, return, and privacy policies.
Price Guarantee
At Bulletproof Zone, we ensure that you get the absolute best prices for Bulletproof Vests, Plate Carriers, Bulletproof Clothing, Bulletproof Backpacks, as well as other tactical gear and safety products, all while ensuring the highest quality.
For us, providing products of the highest quality is unnegotiable. As always, high-quality products do not come cheap, but we ensure that it is reasonably priced using our exclusive contracts with the best protective product manufacturers.
We want you to feel confident that you are getting the absolute best price for the product you are ordering. To show our confidence in our prices, we offer a price guarantee to our customers. If you find out within six months from your purchase of an item that our company offered an item for a price higher than our competition, we will refund the difference.
To get a refund, all you need to do is e-mail us a link to the product on our website and the same product on our competitor’s website within six months from the date of your purchase, and we will process the refund accordingly.
Terms and Conditions of our 100% Price Guarantee:
- You must have purchased the item from our website before requesting your Price Match Guarantee
- Discounted goods and goods received as an Ad on such as; buy one, get one free offer are not eligible
- The item must be in stock on the competitor's website
- The 100% price guarantee is only valid within the first six months from the date of purchase
- The competitor must be an online store; they may not have a retail location
- The competitor website cannot be a discounter or an auction website (i.e., eBay, overstock, etc.)
- The competitor must be an Authorized Retailer of the product in question
- The Price Match Guarantee includes the item price and the shipping charges; it excludes sales tax
Why Bulletproof Zone?
At Bulletproof Zone, we are passionate about protecting lives. Every piece from our catalog is designed and rigorously tested to provide the highest quality of protection you need from firearms, explosives or even close quarters combat.
We’ve partnered with various manufacturers that operate within the United States under a strict set of guidelines both on a national and corporate level so that when you shop with us, you will be able to select from the highest quality body armor, ballistic plates and tactical gear available on the market.
Whether you are a military service member looking to find your own gear, a professional that operates in the security field, or an avid firearms enthusiast that capitalizes the importance of safety when shooting, our tactical gear will provide you the level of protection you need.
Any questions or concerns? Please call us at (408)-909-4938 or email us at support@bulletproofzone.com and a member of our professional support team will be in touch with you as soon as possible.
