- Product Details
- Shipping and Returns
- The BPZ Promise
- Why Bulletproof Zone?
The Shellback Tactical Banshee Elite 3.0 Lightweight Armor System pairs the Banshee Elite 3.0 plate carrier with two Model LON-III-P Level III UHMWPE body armor plates, delivering full front-and-rear rifle protection in a complete, ready-to-wear kit. Each LON-III-P plate is NIJ 0101.06 certified and listed on the NIJ Compliant Products List, weighs 3.5 lbs in the 10x12 SAPI cut, and measures 1.25 inches thick. The Banshee Elite 3.0 carrier is built from 500-denier Cordura nylon and 1000-denier laminated Squadron nylon, with a laser-cut MOLLE platform, a quick-release cummerbund system, and an integrated six-pocket M4 magazine cummerbund. Both components carry independent warranties: a 10-year ballistic warranty on the plates and a lifetime warranty on the carrier. Both are made in the USA.
Who this is for
- Professionals needing certified rifle protection: the LON-III-P is NIJ 0101.06 Listed, providing independently verified Level III stand-alone performance in a platform built for daily wear.
- Shooters and responders who carry for extended periods: the UHMWPE construction brings each plate in at 3.5 lbs, reducing the total two-plate load significantly compared to a typical steel or ceramic rifle-plate setup.
- Buyers who want a complete system out of the box: the kit ships carrier and plates together, so there is no guesswork around fitment — the LON-III-P seats directly in the Banshee Elite 3.0's 10x12 plate pockets.
Ballistic performance
The LON-III-P is constructed of ultra-high molecular weight polyethylene (UHMWPE) and provides stand-alone, full edge-to-edge Level III rifle protection. The plate is multi-hit rated across its entire face — protection runs from edge to edge, not only in a central strike zone. A 1000-denier nylon exterior fully seals the UHMWPE core against liquids, chemicals, and harsh environmental exposure. The plate carries positive buoyancy and floats in water.
In addition to meeting the NIJ 0101.06 Level III standard for 7.62x51mm M80 ball at 2,780 fps, the LON-III-P is Special Threat Rated against three additional rounds: 7.62x39mm mild steel core at 2,400 fps, 5.56x45mm M193 at 3,250 fps, and .223 SCS Brush Hog at 3,150 fps. These special threat ratings are outside the scope of the NIJ certification but are documented in independent ballistic testing.
Independent ballistic test data
| Standard | Projectile | Grain | Velocity (ft/s) |
|---|---|---|---|
| NIJ 0101.06 | 7.62x51mm M80 | 147 | 2,780 |
| Special Threat | 7.62x39mm MSC | 123 | 2,400 |
| Special Threat | 5.56x45mm M193 | 55 | 3,250 |
| Special Threat | .223 SCS Brush Hog | 55 | 3,150 |
Plate compatibility and cut geometry
The LON-III-P ships in a 10x12 SAPI/ESAPI cut with a single-curve profile and measures 1.25 inches thick. The Banshee Elite 3.0 plate pockets load from the bottom and accept 10x12 Shooters Cut or SAPI cut plates, making this kit a direct mechanical match. The single-curve geometry seats flush against the torso without requiring multi-curve contouring, and the SAPI cut provides the widest coverage footprint in the standard 10x12 form factor.
Banshee Elite 3.0 carrier features
The Banshee Elite 3.0 is built from 500-denier Cordura nylon for the main shell and 1000-denier laminated Squadron nylon for high-wear surfaces. A laser-cut MOLLE platform covers the front panel, rear panel, and cummerbund, reducing weight relative to traditional woven MOLLE while maintaining full accessory compatibility. Two quick-release cummerbund buckles allow fast donning and doffing. The rear drag handle extends to 34 inches.
The cummerbund integrates six M4 magazine pockets and two soft armor panel pockets sized for Banshee Elite 3.0 soft armor inserts, along with interior laser-cut MOLLE panels for attaching side armor plate pockets. A front zipper admin pouch handles small field gear. A rear hydration pocket accommodates a 2L bladder. 3D spacer mesh padding runs across the front, rear, and shoulder pads for airflow and load distribution. Removable front chest clips accept chest rigs or placards, and loop panels on front and rear mount ID placards.
Sizing and adjustability
The Banshee Elite 3.0 cummerbund is available in three sizes. To find your size, measure the circumference of your torso at the level where the bottom of the plate will sit, then add 2 inches to that measurement and match it to the chart below.
| Cummerbund Size | Torso Range (adjusted) |
|---|---|
| Small / Medium | 32 in – 39 in |
| Large / XLarge | 39 in – 46 in |
| 2XL / 3XL | 46 in – 58 in |
Two shoulder buckles allow quick height adjustment to raise or lower the carrier for proper plate placement. Contact us if you have questions about sizing before ordering.
Specifications
- Kit contents: Shellback Tactical Banshee Elite 3.0 Plate Carrier x1; Model LON-III-P Level III UHMWPE Plate x2
- Plate NIJ certification: NIJ Listed under NIJ 0101.06 Level III; Special Threat Rated for M193, 7.62x39mm MSC, and .223 SCS Brush Hog
- Plate construction: Ultra-high molecular weight polyethylene (UHMWPE)
- Plate exterior: 1000-denier nylon sealed cover
- Plate size: 10 in x 12 in
- Plate cut: SAPI / ESAPI
- Plate curve: Single curve
- Plate thickness: 1.25 in
- Plate weight: 3.5 lbs per plate
- Protection type: Stand-alone; full edge-to-edge; multi-hit rated
- Positive buoyancy: Yes — plate floats in water
- Plate warranty: 10-year ballistic warranty
- Carrier shell materials: 500-denier Cordura nylon; 1000-denier laminated Squadron nylon
- MOLLE platform: Laser-cut; front, rear, and cummerbund
- Cummerbund features: 6 integrated M4 magazine pockets; 2 soft armor panel pockets; interior laser-cut MOLLE; quick-release buckles
- Drag handle: Extends to 34 in
- Carrier warranty: Lifetime warranty against manufacturing and material defects
- Country of origin: USA (plates and carrier)
Fit and carrier compatibility
The LON-III-P plates are a factory-matched fit for the Banshee Elite 3.0's bottom-loading 10x12 plate pockets. The SAPI cut and single-curve profile seat correctly without modification. The carrier's cummerbund size covers torso circumferences from 32 inches to 58 inches across three cummerbund options. If you are pairing LON-III-P plates with a different carrier, confirm that the carrier accepts 10x12 SAPI cut plates with 1.25-inch thickness before ordering.
Frequently asked questions
Is the LON-III-P plate NIJ Certified?
Yes. The Model LON-III-P is NIJ 0101.06 certified and listed on the NIJ Compliant Products List at Level III. NIJ certification means an independent, NIJ-accredited laboratory tested the plate against the 7.62x51mm M80 threat at 2,780 fps and the plate passed. The Special Threat ratings for M193, 7.62x39mm MSC, and .223 SCS Brush Hog are additional documented test results outside the scope of the NIJ standard.
What rounds does the LON-III-P stop?
The plate is NIJ-certified to stop 7.62x51mm M80 ball at 2,780 fps. It is also Special Threat Rated to stop 7.62x39mm mild steel core at 2,400 fps, 5.56x45mm M193 at 3,250 fps, and .223 SCS Brush Hog at 3,150 fps. It does not carry Level IV certification and is not rated for armor-piercing rifle rounds such as 7.62x51mm AP or M855A1.
What is the difference between Level III and Level III+?
Level III is an NIJ-standardized designation covering rifles up to 7.62x51mm M80 ball. Level III+ is a vendor-specific special threat rating — not an NIJ standard — used to indicate that a plate has additionally passed testing against higher-velocity or steel-core threats such as M193 or M855. The LON-III-P meets the NIJ Level III standard and carries Special Threat ratings for M193 and 7.62x39mm MSC, placing its performance in the Level III / Special Threat tier.
How heavy is the full two-plate kit?
Each LON-III-P plate weighs 3.5 lbs, so the two-plate load totals 7.0 lbs before adding the carrier shell. The UHMWPE construction keeps this well below a comparable two-plate steel setup, which typically runs 14–16 lbs for front and rear 10x12 plates.
Does this kit come with soft armor side panels?
The kit includes the Banshee Elite 3.0 carrier and two LON-III-P rifle plates. The cummerbund features two pockets sized to accept Banshee Elite 3.0 soft armor cummerbund inserts, and interior laser-cut MOLLE panels accommodate side plate pockets — but soft armor panels and side plates are sold separately.
Can this armor system be shipped to my state?
This kit cannot be shipped to New York or Connecticut due to state body armor restrictions. It is subject to US export regulations. Under 18 U.S.C. § 931, anyone with a federal felony conviction for a crime of violence is prohibited from purchasing or possessing body armor.
Bulletproof Zone will ship orders as soon as possible. For example, if you purchase three items, they will be shipped to you based on lead time and availability. This way you get as much of your order as soon as possible, which means that your order may come in separate packages, especially if you order products from different manufacturers.
We will bear the shipping cost for products returned because of product defect, misrepresentation, or false description. Afterward, we will initiate a full reimbursement should you decline an offer to replace the item with the same item of equal value and assured quality.
Order Confirmation:
As soon as you place your order with Bulletproof Zone, you will receive an order confirmation e-mail. This means that your order has been logged in our system and your credit card has been pre-authorized for the purchase. Afterward, we contact our suppliers to confirm the availability of the product you are ordering for immediate shipment. If your item is on backorder or unavailable, we will cancel the pre-authorization and duly inform you via e-mail.
Order Shipment:
Orders are shipped within five business days from the date of your order unless specified otherwise on the product page. The product page will contain the most accurate estimate on shipping and lead times. Shipping and lead times provided on the product page are our best estimates based various factors including order volume, information from our manufacturer, raw material fluctuations, etc., and may vary due to these factors.
You will receive an email containing the tracking information of your order after the order has been shipped to your location. If you do not receive tracking information from us within seven business days of the lead time specified on the product page, feel free to follow up with us at orders@bulletproofzone.com.
Bulletproof Zone is not responsible for lost or stolen packages. A tracking number will be provided when the package is shipped. It is the buyer’s responsibility to provide a safe place to receive mail. Once an item has been marked as delivered by the carrier, the seller is not responsible should that item go missing.
Some of our products are carried by manufacturers in various countries. Due to the nature and cost of the products that Bulletproof Zone sells, you may be charged additional import duties upon delivery. Our support team can help in investigating abnormally high import duty charges but we are unable to cover the cost of any import duties.
Damages:
We take full responsibility for any obvious damage to your product caused by wrong packaging or delivering an already defective product. Please inspect the packaging of your item(s) when they arrive, if you notice any damage, you should document it when signing for delivery. If the item(s) contained in the package arrives damaged, please send photos to support@bulletproofzone.com, and we will process an insurance claim on your behalf.
Returns and Cancellation Policy:
We back all our products with a customer satisfaction guarantee, so we created a fair return and cancellation policy.
All sales are final. No Refunds, No Cancellations. In most cases, once the order is processed, it is final and not cancellable. We may allow exceptions due to an order error or wish to return your order after delivery for any reason other than a product defect or misrepresentation. Any cancellation request is subject to an administration and cancellation fee equal to 10% of your order with a minimum of $35, whether order shipment is successful or not.
All sales are final on all closeout items and for custom manufactured bulletproof clothing once the manufacturing process has begun or not returnable unless there is a product defect or misrepresentation. Applicable to brands such as MC Armor, Israel Catalog, BulletBlocker, Tacticon Armament, Wonder Hoodie, and others.
Before returning any product, you MUST obtain a return authorization from our customer service representative. We can only process AUTHORIZED returns for items.
To make a Return or Exchange:
- Obtain authorization for return or exchange by emailing us at support@bulletproofzone.com explaining the reason for the return or exchange.
- Please use or indicate your order number as attention
Return or exchanges request submission must be within 14 calendar days upon receipt of shipment unless noted otherwise on the product description page. Your return must be in original packaging and unused.
We encourage using USPS flat-rate shipping in returning products to receive a shipping expense refund. Buyers must ensure all returned parcels delivery receipt AND signature confirmation. We highly recommend insuring your parcel as we cannot issue a refund for an item that we do not receive back should it get lost/damaged during transit.
Refunds:
Should an item be returned because it was defective, misrepresented, not as described, etc., Bulletproof Zone will issue a full refund and will reimburse the customer for all shipping expenses associated with the return.
Please allow 5-10 business days from the time the item is received to process a refund. Refunds will only be issued to the original credit card that you use when placing your order.
We stand behind our products 100%!
By purchasing any of our items, the buyer certifies they have read and agree to our shipping, return, and privacy policies.
The Bulletproof Zone Promise
When you buy body armor, you're buying your safety. We don't take that lightly. Here's what every order from Bulletproof Zone includes.
1. Authorized dealer of every brand we carry
Every plate, vest, and carrier we ship comes from the manufacturer directly to our warehouse. We don't sell gray-market product, surplus, or returns. That means factory-fresh stock, the full manufacturer warranty, and real after-sale support — the kind only an authorized dealer can offer.
We maintain authorized-dealer relationships with America's leading body armor brands, including Spartan Armor Systems, AR500 Armor, RMA Defense, Shellback Tactical, Caliber Armor, DFNDR Armor, Protection Group Denmark, BulletSafe, BulletBlocker, and over 40 more.
2. Best price, guaranteed
If you find a lower price at another authorized dealer of the same product within six months of your purchase, we'll refund the difference.
Why the "authorized dealer" requirement? Because gray-market and surplus armor may not be genuine, may have a compromised supply chain, and almost never comes with a manufacturer warranty. We won't price-match against products that may not actually protect you.
3. Free fitment consultation
Body armor only protects you if it fits. Email us a photo and your measurements before you order, and one of our specialists will help you size your carrier and plates correctly — at no charge, no obligation.
4. Trusted by thousands of customers
Bulletproof Zone has been a trusted authorized dealer of America's leading body armor manufacturers for over five years. We have over 4,000 verified Trustpilot reviews from real customers across all 50 states.
Price Match Guarantee — Terms
- You must have purchased the item from our website before requesting the price match.
- Discounted items and "free with purchase" items are not eligible.
- The item must be in stock on the competitor's website at the time of your request.
- The price match is valid for six months from the date of your purchase.
- The competitor must be an authorized dealer of the product. Auction sites (eBay, Overstock), discounters, and gray-market resellers do not qualify.
- The competitor must operate an online store. Brick-and-mortar-only retailers do not qualify.
- Price match applies to the item price plus shipping. Sales tax is excluded.
To request a price match, email us a link to the product on our site and the same product on the competitor's site within six months of purchase. We'll process the refund.
Why Bulletproof Zone?
At Bulletproof Zone, we are passionate about protecting lives. Every piece from our catalog is designed and rigorously tested to provide the highest quality of protection you need from firearms, explosives or even close quarters combat.
We’ve partnered with various manufacturers that operate within the United States under a strict set of guidelines both on a national and corporate level so that when you shop with us, you will be able to select from the highest quality body armor, ballistic plates and tactical gear available on the market.
Whether you are a military service member looking to find your own gear, a professional that operates in the security field, or an avid firearms enthusiast that capitalizes the importance of safety when shooting, our tactical gear will provide you the level of protection you need.
Any questions or concerns? Please call us at (408)-909-4938 or email us at support@bulletproofzone.com and a member of our professional support team will be in touch with you as soon as possible.
