{"product_id":"silynx-gas-mask-adaptor-cable-clarus-xpr-lynx","title":"Silynx Gas Mask Adaptor Cable for Clarus and XPR Lynx Headsets","description":"\u003cp class=\"product-lead\"\u003eThe Silynx Gas Mask Adaptor Cable connects the Clarus Stingray Headset or XPR Lynx Headset to a gas mask, SCBA, CBRN, or other enclosed respiratory system, allowing operators to maintain radio communications while wearing protective breathing equipment. Available in Black only, with a single SKU (CA0196-00). Compatible control boxes are Clarus I and Clarus II.\u003c\/p\u003e\n\n\u003ch2\u003eModular by Design\u003c\/h2\u003e\n\u003cp\u003eThe Silynx ecosystem separates the headset, control box, and cable into three distinct components joined by Silynx's Quick Disconnect (QDC) on the headset side. The Gas Mask Adaptor Cable slots into that architecture as the interface between the headset system and the enclosed mask or breathing apparatus. When mission requirements change, the cable is swapped rather than the headset or controller, reducing replacement cost and logistical burden compared to fixed-cable systems.\u003c\/p\u003e\n\n\u003ch2\u003eBuilt for Enclosed Respiratory Systems\u003c\/h2\u003e\n\u003cp\u003eThe Gas Mask Adaptor Cable is designed specifically for use with gas masks, SCBA units, CBRN enclosures, and similar sealed systems where a standard audio connection is not practical. This makes it relevant for hazmat operations, CBRN response, and any scenario where the operator must maintain voice communications while wearing a full-face or enclosed breathing apparatus.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHeadset Compatibility:\u003c\/strong\u003e Works with the Clarus Stingray Headset and XPR Lynx Headset\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSystem Compatibility:\u003c\/strong\u003e Interfaces with gas masks, SCBA, CBRN, and other enclosed respiratory systems\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eControl Box Compatibility:\u003c\/strong\u003e Clarus I and Clarus II control boxes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eQuick Disconnect (QDC):\u003c\/strong\u003e Silynx proprietary modular connector enables fast field cable swaps without tools\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black only\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eSpecification\u003c\/th\u003e\n      \u003cth\u003eDetail\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eSKU\u003c\/td\u003e\n      \u003ctd\u003eCA0196-00\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eColor\u003c\/td\u003e\n      \u003ctd\u003eBlack\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eCompatible Headsets\u003c\/td\u003e\n      \u003ctd\u003eClarus Stingray, XPR Lynx\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eCompatible Control Boxes\u003c\/td\u003e\n      \u003ctd\u003eClarus I, Clarus II\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eCompatible Systems\u003c\/td\u003e\n      \u003ctd\u003eGas mask, SCBA, CBRN, enclosed respiratory systems\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eConnector Type\u003c\/td\u003e\n      \u003ctd\u003eSilynx Quick Disconnect (QDC)\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWho This Is For and Isn't\u003c\/h2\u003e\n\u003cp class=\"product-fit-yes\"\u003eThe Silynx Gas Mask Adaptor Cable suits operators who use a Clarus Stingray or XPR Lynx headset with a Clarus I or Clarus II control box and need to maintain radio communications while wearing a gas mask, SCBA, CBRN enclosure, or similar sealed breathing apparatus: hazmat teams, CBRN responders, and tactical operators in contaminated environments.\u003c\/p\u003e\n\u003cp class=\"product-fit-no\"\u003eThis cable is not compatible with Silynx headsets or control boxes outside the Clarus I and Clarus II range, and it is not a radio adaptor cable. It does not connect to a radio directly. It is not designed for open-air or standard headset use without an enclosed respiratory system in the signal path. Non-Silynx headsets and control boxes are not supported.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhich Silynx headsets work with this cable?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Silynx Gas Mask Adaptor Cable (CA0196-00) is compatible with the Clarus Stingray Headset and the XPR Lynx Headset. It is not listed as compatible with other Silynx headset models, so buyers should confirm their headset model before ordering.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWhich control boxes are supported?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Gas Mask Adaptor Cable works with the Clarus I and Clarus II control boxes. Compatibility with other Silynx controllers, including FORTIS or C4OPS, is not stated for this cable. Contact us for confirmation before ordering with a different control box.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWhat respiratory systems does this cable interface with?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Silynx Gas Mask Adaptor Cable is designed to connect to gas masks, SCBA (self-contained breathing apparatus), CBRN enclosures, and other enclosed respiratory systems. It is not intended for open-air or standard headset configurations.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eHow does the Silynx Quick Disconnect work with this cable?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Silynx Quick Disconnect (QDC) is a proprietary modular connector on the headset side of every Silynx cable, including the Gas Mask Adaptor Cable. It allows fast field swaps of cables without tools, so operators can change configurations without replacing the headset or control box.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eCan this cable ship to my state?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Silynx Gas Mask Adaptor Cable is available for shipping within the United States only. Contact us with any questions about your order or shipping eligibility.\u003c\/p\u003e","brand":"Silynx","offers":[{"title":"Black","offer_id":67139245670771,"sku":"CA0196-00","price":182.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1926\/7025\/files\/CA0196-00_Avon-Cable.png?v=1792208674","url":"https:\/\/bulletproofzone.com\/products\/silynx-gas-mask-adaptor-cable-clarus-xpr-lynx","provider":"Bulletproof Zone","version":"1.0","type":"link"}