{"product_id":"ess-firepro-structural-firefighting-goggles","title":"ESS FirePro Structural Firefighting Goggles","description":"\u003cp class=\"product-lead\"\u003eThe ESS FirePro structural firefighting goggles are designed for structural fire operations, carrying compliance with NFPA 1971-2013 Edition (including the 5-minute, 500°F oven test), U.S. Federal OSHA compliance, conformance exceeding ANSI Z87.1-2015 requirements, and Primary Eye Protection status under NFPA 1500. Every component is heat and flame resistant. A single variant is available.\u003c\/p\u003e\n\n\u003ch2\u003eGloved-Hand Adjustability\u003c\/h2\u003e\n\u003cp\u003eThe ESS FirePro goggles use a patented Speed-Clip strap system that lets a firefighter adjust goggle strap tension quickly, without removing gloves. In structural firefighting, where conditions can change in seconds and hands are rarely bare, the ability to reseat or tighten a goggle one-handed and in full PPE removes a real operational friction point. The Speed-Clip system is an ESS-patented design specific to the FirePro line.\u003c\/p\u003e\n\n\u003ch2\u003eLens Clarity Under Stress\u003c\/h2\u003e\n\u003cp\u003eESS FirePro goggles use ClearZone FlowCoat lens treatment, which applies anti-scratch coating to the exterior lens surface and anti-fog coating to the interior surface. Structural firefighting environments combine heat, moisture, and rapid temperature changes: conditions that drive fogging and lens abrasion. Addressing both failure modes in a single lens treatment keeps vision clear through entry, interior work, and exit without requiring the wearer to intervene.\u003c\/p\u003e\n\n\u003ch2\u003eLow-Profile Fit With Helmet Compatibility\u003c\/h2\u003e\n\u003cp\u003eThe ESS FirePro frame is low-profile with a wide wrap design that reduces interference with structural firefighting helmets and extends peripheral vision. The FirePro-1971 EX-2 configuration adds a two-piece strap with Snap-on\/Snap-off mounting brackets that secure to brimmed helmets without drilling. For departments issuing brimmed helmets, this means the goggles mount and dismount cleanly without modifying the helmet.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePatented Speed-Clip Strap System:\u003c\/strong\u003e adjusts goggle strap tension quickly, designed for use with gloves on\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eClearZone FlowCoat Lens Treatment:\u003c\/strong\u003e anti-scratch coating on the exterior, anti-fog coating on the interior\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLow-Profile Wide-Wrap Frame:\u003c\/strong\u003e minimizes helmet interference and maximizes peripheral vision\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAll Heat and Flame Resistant Components:\u003c\/strong\u003e every part of the goggle is rated heat and flame resistant\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNFPA 1971-2013 Compliant:\u003c\/strong\u003e includes the 5-minute, 500°F oven test requirement\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSnap-on\/Snap-off Brimmed Helmet Brackets (EX-2):\u003c\/strong\u003e two-piece strap mounts to brimmed helmets, no drilling required\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eSpecification\u003c\/th\u003e\n      \u003cth\u003eDetail\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eBrand\u003c\/td\u003e\n      \u003ctd\u003eESS\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eSKU\u003c\/td\u003e\n      \u003ctd\u003eKRC-ESS-740-0536\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eWeight\u003c\/td\u003e\n      \u003ctd\u003e0.71 lb\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eCountry of Origin\u003c\/td\u003e\n      \u003ctd\u003eUnited States\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eCompliance\u003c\/td\u003e\n      \u003ctd\u003eNFPA 1971-2013 Edition (including 5-min, 500°F oven test); U.S. Federal OSHA; exceeds ANSI Z87.1-2015\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eNFPA 1500 Status\u003c\/td\u003e\n      \u003ctd\u003ePrimary Eye Protection\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eLens Treatment\u003c\/td\u003e\n      \u003ctd\u003eClearZone FlowCoat (anti-scratch exterior, anti-fog interior)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eStrap System\u003c\/td\u003e\n      \u003ctd\u003ePatented ESS Speed-Clip\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eUPC\u003c\/td\u003e\n      \u003ctd\u003e811533012213\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWho This Is For and Isn't\u003c\/h2\u003e\n\u003cp class=\"product-fit-yes\"\u003eThe ESS FirePro structural firefighting goggles suit structural fire operations where NFPA 1971-2013 compliance is required, where helmet compatibility (particularly with brimmed helmets) matters, and where the wearer needs to adjust eyewear while in full gloved PPE. The goggles carry Primary Eye Protection status under NFPA 1500 and are U.S. Federal OSHA compliant.\u003c\/p\u003e\n\u003cp class=\"product-fit-no\"\u003eThe ESS FirePro goggles are not rated for ballistic threats and carry no NIJ certification. These goggles are described for structural firefighting only; no suitability is stated for wildland firefighting, proximity operations, or ARFF applications. Buyers whose department specifies a different NFPA edition or a different compliance standard should verify this product meets their requirement before ordering.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhat safety standards do the ESS FirePro structural goggles meet?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe ESS FirePro structural firefighting goggles are compliant with NFPA 1971-2013 Edition, including the 5-minute, 500°F oven test. They are also U.S. Federal OSHA compliant, exceed the requirements of ANSI Z87.1-2015, and are designated Primary Eye Protection under NFPA 1500. All components are heat and flame resistant.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eCan the ESS FirePro goggles be adjusted while wearing gloves?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eYes. The ESS FirePro goggles use a patented Speed-Clip strap system designed specifically for gloved-hand adjustment. A firefighter can tighten or loosen the strap tension quickly without removing gloves, which is the typical condition during structural operations.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWill the ESS FirePro goggles fog up in high-heat environments?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe ESS FirePro goggles use ClearZone FlowCoat lens treatment, which applies an anti-fog coating to the interior lens surface and an anti-scratch coating to the exterior. This dual-surface treatment is designed to maintain clear vision through the heat and moisture conditions typical of structural firefighting.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eDo the ESS FirePro goggles work with brimmed helmets?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe FirePro-1971 EX-2 configuration includes a two-piece strap with Snap-on\/Snap-off mounting brackets that secure to brimmed helmets without drilling. The standard low-profile, wide-wrap frame is also designed to minimize interference with structural firefighting helmets generally.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWhere are the ESS FirePro structural goggles manufactured?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe ESS FirePro structural firefighting goggles are manufactured in the United States. Country of Origin is listed as US.\u003c\/p\u003e","brand":"ESS","offers":[{"title":"Default Title","offer_id":67030999171443,"sku":"KRC-ESS-740-0536","price":86.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1926\/7025\/files\/ess-740-0536.png?v=1790999941","url":"https:\/\/bulletproofzone.com\/products\/ess-firepro-structural-firefighting-goggles","provider":"Bulletproof Zone","version":"1.0","type":"link"}