{"product_id":"1791-gunleather-snagmag-xdm-fns-fnx-sr9-pocket-magazine-holster-rh","title":"1791 Gunleather SNAGMAG XDm FNS FNX SR9 Full-Size Pocket Magazine Holster","description":"\u003cp class=\"product-lead\"\u003eThe 1791 Gunleather SNAGMAG is a patented (US9170064B2) pocket magazine holster custom-fit for full-size XDm 9\/40, FNS, FNX, and SR9\/40 pistols, designed for right-hand draw. It rides in the front support-side pocket and is styled to resemble a pocketknife clip, keeping a spare magazine concealed and accessible without advertising its purpose. This listing covers the right-hand version only.\u003c\/p\u003e\n\n\u003ch2\u003eConcealment Without Compromise\u003c\/h2\u003e\n\u003cp\u003eThe SNAGMAG XDm Full\/FNS\/FNX\/SR9 sits vertically against the outside seam of the front support-side pocket, bullets facing forward, with only a clip visible above the pocket edge. The pocketknife profile means bystanders see nothing that reads as a magazine carrier. For right-handed shooters, the holster rides in the left front pocket, placing the spare magazine exactly where the support hand can reach it during a reload.\u003c\/p\u003e\n\n\u003ch2\u003eA Draw Stroke Built Into the Design\u003c\/h2\u003e\n\u003cp\u003eThe SNAGMAG's name describes its mechanism: as the magazine is pulled upward, the holster body snags the back corner of the pocket and stays behind while the magazine comes free. The draw uses the index finger along the front of the magazine and the thumb on the body, creating a consistent, repeatable motion that does not require fishing or repositioning. The custom fit keeps the floor plate seated below the top edge of the holster so the magazine indexes cleanly on every draw.\u003c\/p\u003e\n\n\u003ch2\u003eCarry Options Beyond the Front Pocket\u003c\/h2\u003e\n\u003cp\u003eThe SNAGMAG can also be worn inside the waistband or in a back pocket. Shooters who prefer back-pocket carry should note that the correct orientation requires the opposite-hand version. The right-hand model is intended for front support-side or IWB carry. The holster is lightweight enough that either position adds minimal bulk to a concealed carry setup.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePatented design (US9170064B2):\u003c\/strong\u003e purpose-built retention mechanism that uses the pocket corner to hold the holster while the magazine is drawn free\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePocketknife disguise:\u003c\/strong\u003e external clip profile conceals the holster's purpose from casual observation\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCustom fit:\u003c\/strong\u003e sized specifically for full-size XDm 9\/40, FNS, FNX, and SR9\/40 magazines\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMultiple carry positions:\u003c\/strong\u003e front support-side pocket, inside the waistband, or back pocket\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLightweight construction:\u003c\/strong\u003e minimal added bulk for all-day concealed carry\u003c\/li\u003e\n  \u003cli\u003e\u003cstrong\u003eLimited lifetime warranty\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eSpecification\u003c\/th\u003e\n      \u003cth\u003eDetail\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eBrand\u003c\/td\u003e\n      \u003ctd\u003e1791 Gunleather\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eSKU\u003c\/td\u003e\n      \u003ctd\u003e1791 TAC-SNAG-131-R\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eCompatible Magazines\u003c\/td\u003e\n      \u003ctd\u003eXDm Full 9\/40, FNS, FNX, SR9\/40 Full-Size\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eDominant Hand\u003c\/td\u003e\n      \u003ctd\u003eRight hand\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003ePrimary Carry Position\u003c\/td\u003e\n      \u003ctd\u003eFront support-side pocket (IWB and back pocket also supported)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003ePatent\u003c\/td\u003e\n      \u003ctd\u003eUS9170064B2\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eWarranty\u003c\/td\u003e\n      \u003ctd\u003eLimited lifetime\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eCountry of Origin\u003c\/td\u003e\n      \u003ctd\u003eMade in the U.S.A.\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWho This Is For and Isn't\u003c\/h2\u003e\n\u003cp class=\"product-fit-yes\"\u003eThis holster suits right-handed concealed carriers who want to keep a spare magazine in a front pocket without a visible magazine carrier. It is compatible with full-size XDm 9\/40, FNS, FNX, and SR9\/40 pistols and works for front-pocket, IWB, or back-pocket carry.\u003c\/p\u003e\n\u003cp class=\"product-fit-no\"\u003eThis model is not compatible with compact or subcompact magazine sizes, and it is not the correct choice for left-handed shooters or for back-pocket carry. Those use cases require the opposite-hand version. It does not replace a holster for the firearm itself; it carries the spare magazine only.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhich pocket does the SNAGMAG ride in for a right-handed shooter?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eFor right-handed shooters, the SNAGMAG XDm Full\/FNS\/FNX\/SR9 rides in the left front pocket, the support side. It sits vertically against the outside seam with the bullets facing forward, leaving only the pocketknife-style clip visible above the pocket edge.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eHow does the magazine release from the holster during a draw?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eAs the magazine is drawn upward, the SNAGMAG body snags the back corner of the pocket and stays in place while the magazine pulls free. The index finger runs along the front of the magazine and the thumb rests on the body, creating a consistent draw stroke without fumbling or repositioning.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eCan the SNAGMAG be carried inside the waistband or in a back pocket?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe SNAGMAG XDm Full\/FNS\/FNX\/SR9 supports IWB carry and back-pocket carry in addition to front-pocket use. Shooters who prefer the back pocket should purchase the opposite-hand version so the magazine faces the correct direction for their draw.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWhat magazines fit this specific SNAGMAG model?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThis model (SKU 1791 TAC-SNAG-131-R) is custom-fit for full-size XDm 9mm and .40, FNS, FNX, and SR9\/40 magazines. It is not sized for compact or subcompact variants of those pistol lines. Verify your magazine's floor plate seats below the top edge of the holster body before carrying.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eCan the SNAGMAG ship to my state?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe SNAGMAG is a magazine holster, not body armor, so state body armor shipping restrictions do not apply. No additional state-level restrictions on this product are noted.\u003c\/p\u003e","brand":"1791 Gunleather","offers":[{"title":"Default Title","offer_id":67301123948915,"sku":"TGD-1791 TAC-SNAG-131-R","price":48.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1926\/7025\/files\/1791-tac-snag_l_beb9b223-de30-479a-bbd7-9f1c1549d063.jpg?v=1793761502","url":"https:\/\/bulletproofzone.com\/products\/1791-gunleather-snagmag-xdm-fns-fnx-sr9-pocket-magazine-holster-rh","provider":"Bulletproof Zone","version":"1.0","type":"link"}