{"title":"Tactical Walls","description":"\u003cp\u003eShop Tactical Walls gear at Bulletproof Zone.\u003c\/p\u003e","products":[{"product_id":"tactical-walls-modwall-helmet-hanger-hdpe-wall-mount","title":"Tactical Walls ModWall Helmet Hanger HDPE Wall Mount","description":"\u003cdiv class=\"rte\"\u003e\n\n\u003cp\u003eThe Tactical Walls ModWall Helmet Hanger is a wall-mounted, J-shaped cradle that keeps tactical, motorcycle, and cycling helmets off the floor and within arm's reach. Built from durable HDPE, it attaches directly into any ModWall panel using ModWall-specific connectors and ships with all mounting hardware included. The hanger supports helmets of virtually any size without straps or clamps, making it a clean, low-profile solution for organized gear storage.\u003c\/p\u003e\n\n\u003ch2\u003eWho this is for\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTactical gear owners\u003c\/strong\u003e who want a dedicated, secure wall mount for ballistic or duty helmets in a garage, locker room, or gear room.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCyclists and motorcycle riders\u003c\/strong\u003e looking for a simple, stable way to store helmets on a ModWall panel alongside other riding gear.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAnyone building a modular gear wall\u003c\/strong\u003e who needs a purpose-built helmet hanger that integrates cleanly with the ModWall panel system.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFeatures and design\u003c\/h2\u003e\n\u003cp\u003eThe J-shaped cradle supports helmets from underneath, distributing weight naturally without requiring straps, clamps, or additional hardware beyond the included mounting kit. This approach keeps the helmet shell unmarked and the chin strap free. The profile is compact enough to sit flush against a ModWall panel without protruding into walkway space.\u003c\/p\u003e\n\u003cp\u003eHDPE (high-density polyethylene) construction gives the hanger the rigidity to hold helmets of varying weight and size without flexing or deforming over time. The connector system locks into ModWall panels for a stable, integrated fit that does not rattle or shift under the helmet's load.\u003c\/p\u003e\n\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cp\u003eThe ModWall Helmet Hanger attaches to Tactical Walls ModWall panels using ModWall-specific connectors. It accommodates tactical, motorcycle, cycling, and other helmet types across a wide range of sizes. For a combined helmet and vest storage setup on a single panel, the ModWall Vest Hanger pairs directly with this hanger. The Heavy Gear Hanger is an alternative that includes a direct-to-wall adapter for installations without a ModWall panel.\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cdiv class=\"quick-answer\"\u003e\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Tactical Walls\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e ModWall Helmet Hanger\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSKU:\u003c\/strong\u003e MWHELMET\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e HDPE (high-density polyethylene)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCradle design:\u003c\/strong\u003e J-shaped, supports helmet from underneath\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHelmet compatibility:\u003c\/strong\u003e Tactical, motorcycle, cycling, and other helmet types; various sizes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePanel compatibility:\u003c\/strong\u003e Tactical Walls ModWall panels (ModWall-specific connectors)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShipment weight:\u003c\/strong\u003e 3 lbs\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShipment dimensions:\u003c\/strong\u003e 8.5 x 4 x 7 in\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIncluded:\u003c\/strong\u003e 1 x Helmet Hanger, mounting hardware\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/div\u003e\n\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\n\u003ch3\u003eWhat helmet types does this hanger fit?\u003c\/h3\u003e\n\u003cp\u003eIt fits tactical, motorcycle, cycling, and other helmet types across a wide range of sizes. The J-shaped cradle supports helmets from underneath without straps or clamps, so fit is not limited by chin strap configuration or shell geometry.\u003c\/p\u003e\n\n\u003ch3\u003eDoes this require a ModWall panel to install?\u003c\/h3\u003e\n\u003cp\u003eYes. The ModWall Helmet Hanger uses ModWall-specific connectors and is designed to attach to Tactical Walls ModWall panels. If you need a direct-to-wall option without a panel, the Heavy Gear Hanger includes a direct-to-wall adapter and supports both helmet and vest storage.\u003c\/p\u003e\n\n\u003ch3\u003eWhat is included in the box?\u003c\/h3\u003e\n\u003cp\u003eThe package includes one Helmet Hanger and all mounting hardware needed for installation on a ModWall panel. No additional hardware purchases are required to mount the hanger to an existing panel.\u003c\/p\u003e\n\n\u003ch3\u003eWhat is the hanger made of?\u003c\/h3\u003e\n\u003cp\u003eIt is constructed from HDPE (high-density polyethylene), a rigid polymer that resists flexing and deformation under load. This material holds helmets of varying weight securely without straps or additional support.\u003c\/p\u003e\n\n\u003ch3\u003eCan I use this alongside a vest hanger on the same panel?\u003c\/h3\u003e\n\u003cp\u003eYes. The ModWall Helmet Hanger is compatible with the ModWall Vest Hanger, and both mount to the same ModWall panel. Pairing the two creates a complete helmet and vest storage setup in a single organized wall section.\u003c\/p\u003e\n\n\u003c\/div\u003e","brand":"Tactical Walls","offers":[{"title":"Default Title","offer_id":67013245141363,"sku":"MWHELMET","price":38.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1926\/7025\/files\/DSC_2767s-sq.jpg?v=1790723269"},{"product_id":"tactical-walls-modwall-large-driver-rack","title":"Tactical Walls ModWall Large Driver Rack Wall-Mounted Tool Organizer","description":"\u003cdiv class=\"rte\"\u003e\n\u003cp\u003eThe Tactical Walls ModWall Large Driver Rack is a wall-mounted tool organizer that holds up to 16 screwdrivers, ratchets, calipers, markers, and similar hand tools. Built from US-sourced HDPE and designed to mount directly onto any ModWall panel, it keeps your most-used drivers visible, organized, and within arm's reach. Compatible with all ModWall panel systems, it fits equally well in a home garage, professional workshop, or any organized workspace.\u003c\/p\u003e\n\n\u003ch2\u003eWho this is for\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHome garage organizers\u003c\/strong\u003e who want their screwdrivers and ratchets off the bench and on the wall where they can be grabbed without searching.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eProfessional tradespeople and technicians\u003c\/strong\u003e who need fast, at-a-glance access to the right driver during a job without digging through a toolbox.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eModWall system owners\u003c\/strong\u003e looking to expand their existing panel setup with a dedicated, purpose-built driver storage solution.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFeatures and design\u003c\/h2\u003e\n\u003cp\u003eThe Large Driver Rack mounts flush to any ModWall panel using two triangle supports with included hardware, creating a stable, wall-anchored storage position for up to 16 drivers and ratchets. The rack's slot layout lets you sort tools by type or size so the one you need is always where you expect it. Two triangle supports distribute the load evenly, keeping the rack stable under a full complement of tools.\u003c\/p\u003e\n\u003cp\u003eThe open-face design means every tool stays visible at all times. No drawer to open, no lid to lift. Grab and go.\u003c\/p\u003e\n\n\u003ch2\u003eMaterials and construction\u003c\/h2\u003e\n\u003cp\u003eThe rack is manufactured from US-sourced HDPE (high-density polyethylene). HDPE is rigid enough to support the weight of a full set of hand tools while remaining soft enough that it won't scratch or mar the finish of precision instruments, calipers, or coated driver handles. It resists moisture, oils, and common workshop chemicals, making it a practical choice for garage and shop environments.\u003c\/p\u003e\n\n\u003ch2\u003eIntended use\u003c\/h2\u003e\n\u003cp\u003eMount the Large Driver Rack anywhere a ModWall panel is installed: a garage wall, a workshop bay, a utility room, or a mobile workspace. It accepts screwdrivers, ratchets, markers, calipers, and any similarly sized hand tool that fits the slot profile. The rack works as a standalone addition or as part of a larger ModWall configuration alongside tool racks, shelves, and other ModWall Sport Accessories.\u003c\/p\u003e\n\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cp\u003eThe Large Driver Rack is compatible with all ModWall panel systems. It attaches directly to the panel surface using the included triangle supports and hardware, requiring no additional brackets or adapters. If you are building out a complete wall organization system, it pairs with the ModWall Project Package and the ModWall Large Tool Rack for broader tool coverage.\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cdiv class=\"quick-answer\"\u003e\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Tactical Walls\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e ModWall Large Driver Rack\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSKU:\u003c\/strong\u003e MWPLDR\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e US-sourced HDPE plastic\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCapacity:\u003c\/strong\u003e Up to 16 drivers, ratchets, or similarly sized hand tools\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCompatibility:\u003c\/strong\u003e All ModWall panel systems\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIncluded:\u003c\/strong\u003e 1 Large Driver Plate, 2 Triangle Supports with hardware, Instructions\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCountry of material origin:\u003c\/strong\u003e USA (US-sourced HDPE)\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/div\u003e\n\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\n\u003ch3\u003eWhat ModWall panels does this rack work with?\u003c\/h3\u003e\n\u003cp\u003eIt is compatible with all ModWall panel systems. The two included triangle supports and hardware attach directly to the panel surface with no additional brackets required. If you already own any ModWall panel, this rack will mount to it.\u003c\/p\u003e\n\n\u003ch3\u003eHow many tools does the Large Driver Rack hold?\u003c\/h3\u003e\n\u003cp\u003eIt holds up to 16 screwdrivers, ratchets, or similarly sized hand tools. The slot layout keeps each tool separated and visible so you can identify and retrieve the one you need at a glance.\u003c\/p\u003e\n\n\u003ch3\u003eWhat is the rack made of?\u003c\/h3\u003e\n\u003cp\u003eIt is manufactured from US-sourced HDPE (high-density polyethylene). HDPE is durable enough to support a full set of hand tools and soft enough to protect tool finishes from scratching. It also resists moisture and common workshop chemicals.\u003c\/p\u003e\n\n\u003ch3\u003eWhat is included in the box?\u003c\/h3\u003e\n\u003cp\u003eThe box includes one Large Driver Plate, two Triangle Supports with mounting hardware, and an instruction sheet. No additional hardware purchases are needed to mount the rack to an existing ModWall panel.\u003c\/p\u003e\n\n\u003ch3\u003eCan I use this rack without a ModWall panel?\u003c\/h3\u003e\n\u003cp\u003eIt depends on your setup. The rack is designed to attach to a ModWall panel using the included triangle supports. It is not designed for direct stud or drywall mounting without a ModWall panel as the backing surface. Contact us if you have questions about your specific installation.\u003c\/p\u003e\n\n\u003ch3\u003eDoes this work alongside other ModWall Sport Accessories?\u003c\/h3\u003e\n\u003cp\u003eYes. The Large Driver Rack is part of the ModWall Sport Accessories line and is designed to integrate with other ModWall components, including the Large Tool Rack and the ModWall Project Package, so you can build a complete, organized wall system.\u003c\/p\u003e\n\n\u003c\/div\u003e","brand":"Tactical Walls","offers":[{"title":"Default Title","offer_id":67013345247603,"sku":"MWPLDR","price":32.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1926\/7025\/files\/DSC_1368s-2-scaled-sq.jpg?v=1790727178"},{"product_id":"tactical-walls-modwall-small-tool-rack","title":"Tactical Walls ModWall Small Tool Rack Wall Organizer","description":"\u003cdiv class=\"rte\"\u003e\n\n\u003cp\u003eThe Tactical Walls ModWall Small Tool Rack is a compact HDPE wall-mount organizer designed to keep pliers, utility knives, Allen sets, snips, and other hand tools visible and within arm's reach. It mounts directly to any ModWall panel and integrates into an existing ModWall setup without modification. Mounting hardware is included.\u003c\/p\u003e\n\n\u003ch2\u003eWho this is for\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eGarage and workshop owners\u003c\/strong\u003e who want frequently used hand tools off the bench and on the wall, organized and instantly accessible.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eProfessionals and tradespeople\u003c\/strong\u003e who need a slim, low-profile rack that keeps tools protected and ready in a dedicated workspace.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eModWall system users\u003c\/strong\u003e looking to expand an existing panel setup with a purpose-built hand tool organizer that mounts without extra hardware beyond what's included.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFeatures and design\u003c\/h2\u003e\n\u003cp\u003eThe Small Tool Rack uses a minimalist profile that sits close to the ModWall panel surface, keeping the overall footprint slim while holding tools securely upright and visible. The open design lets you see every tool at a glance, so nothing gets buried or forgotten. It mounts directly to any ModWall panel using the included hardware, making installation straightforward for anyone already running a ModWall system.\u003c\/p\u003e\n\n\u003ch2\u003eMaterials and construction\u003c\/h2\u003e\n\u003cp\u003eThe rack is manufactured from HDPE (high-density polyethylene). HDPE is rigid enough to support the weight of hand tools under regular use, yet has enough surface compliance to protect tool finishes from scratching or marring during insertion and removal. The material resists moisture, making it a practical choice for garage and workshop environments where humidity fluctuates.\u003c\/p\u003e\n\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cp\u003eThe Small Tool Rack is compatible with all ModWall panel systems. If you are building out a new ModWall setup or expanding an existing one, this rack drops into any panel configuration without requiring a specific panel variant. For a complete wall-mounted tool organization solution, the ModWall Project Package pairs well with this rack.\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cdiv class=\"quick-answer\"\u003e\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Tactical Walls\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e ModWall Small Tool Rack\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSKU:\u003c\/strong\u003e MWPSTR\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e HDPE (high-density polyethylene)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCompatibility:\u003c\/strong\u003e All ModWall panel systems\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIncluded:\u003c\/strong\u003e 1 x Small Tool Rack, mounting hardware\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eProduct type:\u003c\/strong\u003e ModWall Sport Accessory\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/div\u003e\n\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\n\u003ch3\u003eWhat tools does this rack hold?\u003c\/h3\u003e\n\u003cp\u003eIt is designed for small hand tools including pliers, utility knives, Allen sets, snips, and similar everyday essentials. The open rack format accommodates a variety of tool shapes and handle sizes, so most standard hand tools used in a garage or workshop will fit.\u003c\/p\u003e\n\n\u003ch3\u003eDoes this rack work with my existing ModWall panels?\u003c\/h3\u003e\n\u003cp\u003eYes. The Small Tool Rack is compatible with all ModWall panel systems, so it integrates directly into any existing ModWall setup without requiring a specific panel type or additional adapters.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's included in the box?\u003c\/h3\u003e\n\u003cp\u003eThe package includes one Small Tool Rack and the mounting hardware needed to attach it to a ModWall panel. No separate hardware purchase is required to get it on the wall.\u003c\/p\u003e\n\n\u003ch3\u003eWhy is HDPE used instead of metal?\u003c\/h3\u003e\n\u003cp\u003eHDPE provides enough rigidity to support hand tools under regular use while remaining soft enough to protect tool finishes from scratching. It also resists moisture, which is an advantage in garage and workshop environments where metal components can corrode over time.\u003c\/p\u003e\n\n\u003ch3\u003eCan I use this rack outside of a ModWall system?\u003c\/h3\u003e\n\u003cp\u003eThe rack is designed to mount to ModWall panels specifically. The included mounting hardware is matched to the ModWall panel interface. Contact us if you have questions about fitment with a specific panel configuration before ordering.\u003c\/p\u003e\n\n\u003c\/div\u003e","brand":"Tactical Walls","offers":[{"title":"Default Title","offer_id":67013345739123,"sku":"MWPSTR","price":17.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1926\/7025\/files\/DSC_1424s-scaled-sq.jpg?v=1790727225"},{"product_id":"tactical-walls-modwall-towel-rack-wall-organization","title":"Tactical Walls ModWall Towel Rack Wall Organization Accessory","description":"\u003cdiv class=\"rte\"\u003e\n\n\u003cp\u003eThe Tactical Walls ModWall Towel Rack is a three-part, press-fit wall accessory that mounts directly onto any ModWall panel to keep towels, rags, and fabric shop supplies organized, visible, and within arm's reach. The rack adjusts to fit different towel sizes and thicknesses, mounts vertically or horizontally, and requires no additional hardware beyond the included mounting hardware. It suits any garage, workshop, or utility space where a clean, integrated wall organization system is already in use.\u003c\/p\u003e\n\n\u003ch2\u003eWho this is for\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eGarage and workshop owners\u003c\/strong\u003e who run a ModWall panel system and want a dedicated, off-the-floor spot for shop towels and rags.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDIY and project enthusiasts\u003c\/strong\u003e who need quick access to cleaning cloths during hands-on work without digging through a drawer or bin.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOrganized utility space builders\u003c\/strong\u003e looking to expand an existing ModWall setup with purpose-built accessories that integrate without extra hardware.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFeatures and design\u003c\/h2\u003e\n\u003cp\u003eThe ModWall Towel Rack ships as three press-fit parts that snap together without tools. Adjusting the rack width is a matter of repositioning the parts to match the towel or rag you use most. The two mounting orientations, vertical and horizontal, give you flexibility to work around existing panel accessories or to match the layout of your wall system.\u003c\/p\u003e\n\u003cp\u003eBecause the rack clips directly onto ModWall panels, it sits flush and stable against the wall surface. There are no loose brackets, no wall anchors to drill, and no secondary mounting plates. The result is a tidy, low-profile holder that keeps fabric items off the workbench and off the floor.\u003c\/p\u003e\n\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cp\u003eThe ModWall Towel Rack mounts exclusively onto Tactical Walls ModWall panels. It is compatible with all ModWall panel variants and integrates with the broader ModWall accessory ecosystem, including other project and sport accessories on the same panel grid. It does not mount to standard pegboard, slatwall, or other wall organization systems.\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cdiv class=\"quick-answer\"\u003e\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Tactical Walls\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e ModWall Towel Rack\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSKU:\u003c\/strong\u003e mwSPORTtr\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e Three press-fit parts\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMounting orientation:\u003c\/strong\u003e Vertical or horizontal\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePanel compatibility:\u003c\/strong\u003e All ModWall panels\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAdditional hardware required:\u003c\/strong\u003e No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIncluded:\u003c\/strong\u003e 1 x Towel Rack (three parts), mounting hardware\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/div\u003e\n\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\n\u003ch3\u003eWhat ModWall panels does this rack work with?\u003c\/h3\u003e\n\u003cp\u003eIt works with all ModWall panel variants. The rack clips directly onto the panel grid with no additional hardware, so any panel in the ModWall lineup accepts it in either vertical or horizontal orientation.\u003c\/p\u003e\n\n\u003ch3\u003eDoes the rack adjust to fit different towel sizes?\u003c\/h3\u003e\n\u003cp\u003eYes. The three press-fit parts can be repositioned to widen or narrow the rack, accommodating different towel sizes and fabric thicknesses. No tools are needed to make the adjustment.\u003c\/p\u003e\n\n\u003ch3\u003eCan I mount this on standard pegboard or slatwall?\u003c\/h3\u003e\n\u003cp\u003eNo. The ModWall Towel Rack mounts exclusively onto Tactical Walls ModWall panels. It is not designed for pegboard, slatwall, or other wall organization systems.\u003c\/p\u003e\n\n\u003ch3\u003eWhat comes in the box?\u003c\/h3\u003e\n\u003cp\u003eThe package includes one towel rack consisting of three parts, plus the mounting hardware needed to attach it to a ModWall panel.\u003c\/p\u003e\n\n\u003ch3\u003eCan I mount it horizontally and vertically on the same panel?\u003c\/h3\u003e\n\u003cp\u003eIt mounts in one orientation at a time, either vertical or horizontal, based on your preferred setup and the available space on your panel. Switching orientation is straightforward since the rack simply clips onto the panel grid.\u003c\/p\u003e\n\n\u003c\/div\u003e","brand":"Tactical Walls","offers":[{"title":"Default Title","offer_id":67013346001267,"sku":"mwSPORTtr","price":15.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1926\/7025\/files\/DSC_5990s-scaled-sq.jpg?v=1790727270"},{"product_id":"tactical-walls-modwall-sport-bike-stand","title":"Tactical Walls ModWall Sport Bike Stand Modular Garage Storage Rack","description":"\u003cdiv class=\"rte\"\u003e\n\n\u003cp\u003eThe Tactical Walls ModWall Sport Bike Stand is a modular, waterproof floor stand designed to store bikes in garages, truck beds, vans, or any space where a stable, portable rack is needed. Built from weather-resistant HDPE and assembled from four interlocking parts, it holds bikes up to 50 lbs and accommodates wheel diameters of 26\", 27.5\", and 29\". Three model variants (Anchor 2, Anchor 3, and Anchor 3S) cover tire widths from narrow road slicks to 4\" fat tires, so riders across disciplines can find a precise fit. When the ride is over, the stand breaks down flat and packs into a backpack or truck bed for transport.\u003c\/p\u003e\n\n\u003ch2\u003eWho this is for\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCyclists with limited garage space\u003c\/strong\u003e who need a stable floor stand that stores compactly between rides.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRiders who travel with their bikes\u003c\/strong\u003e and want a stand that packs flat and sets up fast at a trailhead, campsite, or event.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMulti-bike households\u003c\/strong\u003e looking for a modular system that adapts to road, gravel, trail, and fat-tire bikes without buying separate stands.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFeatures and design\u003c\/h2\u003e\n\u003cp\u003eThe ModWall Sport Bike Stand holds a bike upright by cradling the front or rear wheel between adjustable interlocking sections. Four parts snap together to form the full stand and separate again for flat storage. The spacing settings are sized around real-world tire categories, with built-in flex tolerance so the stand works across a range of widths within each setting. The fully waterproof construction means the stand can live in a damp garage, a truck bed, or outdoors without degrading.\u003c\/p\u003e\n\u003cp\u003eThe Anchor 3S adds a partially skeletonized frame to the Anchor 3 geometry. The cutouts reduce material weight while preserving structural integrity within normal use loads. The skeletonized cavities also serve as strap-through points for securing the stand to a truck bed wall or van floor, and the wheel slot accepts a lock so the bike itself can be secured directly to the stand.\u003c\/p\u003e\n\n\u003ch2\u003eMaterials and construction\u003c\/h2\u003e\n\u003cp\u003eAll three models are molded from HDPE (high-density polyethylene), a material chosen for its resistance to moisture, UV exposure, and impact. HDPE does not rust, rot, or absorb water, making it well suited for garage and outdoor storage environments. The four-part interlocking assembly requires no tools and produces a stand that is rigid under load yet light enough to carry by hand.\u003c\/p\u003e\n\n\u003ch2\u003eModel comparison\u003c\/h2\u003e\n\u003cp\u003eEach model targets the same wheel diameter range (26\", 27.5\", and 29\") but differs in tire-width spacing and frame geometry. Choose the model whose spacing settings best match your tire width.\u003c\/p\u003e\n\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eTire width settings\u003c\/th\u003e\n\u003cth\u003eFrame style\u003c\/th\u003e\n\u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eAnchor 2\u003c\/td\u003e\n\u003ctd\u003e0.66\", 1.26\", 2.1\", 2.4\", 2.8\", 4\", 5.4\" (full width)\u003c\/td\u003e\n\u003ctd\u003eStandard solid\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eAnchor 3\u003c\/td\u003e\n\u003ctd\u003e1\", 1.5\", 2\", 2.5\", 3\", 4\"\u003c\/td\u003e\n\u003ctd\u003eStandard solid, updated geometry\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eAnchor 3S\u003c\/td\u003e\n\u003ctd\u003eSame as Anchor 3\u003c\/td\u003e\n\u003ctd\u003ePartially skeletonized; strap-through cavities; lock-compatible wheel slot\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cp\u003eSpacing values represent the gap between stand sections at each setting. Tire and material flex provide additional tolerance above and below each listed width.\u003c\/p\u003e\n\n\u003ch2\u003eIntended use\u003c\/h2\u003e\n\u003cp\u003eThe stand works equally well as a permanent garage storage solution and as a portable stand for travel. Pack it flat in a bag or truck bed, set it up in under a minute at the destination, and break it down again for the return trip. The Anchor 3S's strap-through cavities make it the preferred choice for truck-bed and van-floor applications where the stand itself needs to stay put during transit.\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cdiv class=\"quick-answer\"\u003e\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Tactical Walls\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eModels available:\u003c\/strong\u003e Anchor 2, Anchor 3, Anchor 3S\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMax bike weight:\u003c\/strong\u003e 50 lbs\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCompatible wheel diameters:\u003c\/strong\u003e 26\", 27.5\", 29\"\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAnchor 2 tire width settings:\u003c\/strong\u003e 0.66\", 1.26\", 2.1\", 2.4\", 2.8\", 4\", 5.4\"\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAnchor 3 \/ 3S tire width settings:\u003c\/strong\u003e 1\", 1.5\", 2\", 2.5\", 3\", 4\"\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e HDPE (high-density polyethylene)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWater resistance:\u003c\/strong\u003e Fully waterproof\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAssembly:\u003c\/strong\u003e Four interlocking parts, tool-free\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePacked configuration:\u003c\/strong\u003e Flat; fits in a backpack or truck bed\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShipment weight:\u003c\/strong\u003e 5 lbs\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShipment dimensions:\u003c\/strong\u003e 36.5 × 8 × 2 in\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/div\u003e\n\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\n\u003ch3\u003eWhich model should I choose: Anchor 2, Anchor 3, or Anchor 3S?\u003c\/h3\u003e\n\u003cp\u003eIt depends on your tire width and how you plan to use the stand. The Anchor 2 covers the widest range of discrete settings, including a 5.4\" full-width position suited to very wide fat tires. The Anchor 3 uses a revised geometry with six evenly spaced settings from 1\" to 4\". The Anchor 3S shares the Anchor 3 spacing but adds a skeletonized frame with strap-through cavities and a lock-compatible wheel slot, making it the best choice for securing the stand and bike during transport.\u003c\/p\u003e\n\n\u003ch3\u003eWhat tire sizes does the ModWall Sport Bike Stand fit?\u003c\/h3\u003e\n\u003cp\u003eAll three models support wheel diameters of 26\", 27.5\", and 29\". Tire width coverage depends on the model: the Anchor 2 spans from 0.66\" road slicks to a 5.4\" full-width setting; the Anchor 3 and 3S cover 1\" through 4\". Built-in flex tolerance in the HDPE material and the tire itself extends usable range slightly above and below each listed setting.\u003c\/p\u003e\n\n\u003ch3\u003eHow heavy a bike can the stand hold?\u003c\/h3\u003e\n\u003cp\u003eThe stand supports bikes up to 50 lbs. That covers most standard road, gravel, trail, and mountain bikes, as well as lighter e-bikes. Heavier e-bikes or cargo bikes that exceed 50 lbs are outside the rated load.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the stand pack down for travel?\u003c\/h3\u003e\n\u003cp\u003eThe four interlocking HDPE parts disassemble without tools and lay flat. The packed profile fits inside a backpack or along the floor of a truck bed or van. The Anchor 3S also includes strap-through cavities in the skeletonized frame so the stand can be strapped to a truck bed wall or van floor during transit.\u003c\/p\u003e\n\n\u003ch3\u003eIs the stand suitable for outdoor or damp environments?\u003c\/h3\u003e\n\u003cp\u003eYes. The stand is fully waterproof and molded from HDPE, which does not rust, rot, or absorb moisture. It is built for garage use but handles outdoor and damp conditions without degrading.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's included in the box?\u003c\/h3\u003e\n\u003cp\u003eThe stand ships as a set of four interlocking HDPE parts that assemble into the complete bike stand. No tools or additional hardware are required for assembly.\u003c\/p\u003e\n\n\u003c\/div\u003e","brand":"Tactical Walls","offers":[{"title":"Anchor 2","offer_id":67013346230643,"sku":"mwSPORTbstand2","price":85.99,"currency_code":"USD","in_stock":true},{"title":"Anchor 3","offer_id":67013346263411,"sku":"mwSPORTbstand3","price":85.99,"currency_code":"USD","in_stock":true},{"title":"Anchor 3S","offer_id":67013346296179,"sku":"mwSPORTbstand3s","price":85.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1926\/7025\/files\/DSC_5944s-sq.jpg?v=1790727339"},{"product_id":"tactical-walls-modwall-athletics-package-wall-organizer","title":"Tactical Walls ModWall Athletics Package Modular Wall Organizer","description":"\u003cdiv class=\"rte\"\u003e\n\u003cp\u003eThe Tactical Walls ModWall Athletics Package is a modular wall-mounted organization system designed to store and display sports gear, helmets, gloves, footwear, and everyday athletic essentials. Built from US-sourced HDPE plastic, the panel and its included mounts attach directly to drywall and accept a range of purpose-built accessories that click into place without tools. The package ships complete with one MWS Panel, one Headwear Mount, one MWS Hanger, one Dual Mount, one pair of Glove Mounts, one Shoe Mount, one Hook, two MB1 adapters, two MB2 adapters, six drywall screws, and two hex keys.\u003c\/p\u003e\n\n\u003ch2\u003eWho this is for\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAthletes and active households\u003c\/strong\u003e who want a dedicated wall station for helmets, gloves, and footwear instead of a pile on the floor.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoaches and team managers\u003c\/strong\u003e who need a clean, visible display for shared gear in a locker room, garage, or equipment room.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eGear-conscious organizers\u003c\/strong\u003e who prefer a modular system that can be reconfigured as their storage needs change.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFeatures and design\u003c\/h2\u003e\n\u003cp\u003eThe MWS Panel is the backbone of the system. It mounts flush to drywall using the included screws and accepts all ModWall Sport accessories through a standardized adapter interface. The MB1 and MB2 adapters bridge the panel to each mount, so accessories lock in securely and can be repositioned without patching holes or remounting the base panel.\u003c\/p\u003e\n\u003cp\u003eEach included accessory targets a specific gear type. The Headwear Mount holds helmets, caps, and other headwear upright and off surfaces. The Glove Mounts keep pairs together and aired out. The Shoe Mount lifts footwear off the floor and onto the wall. The MWS Hanger and Hook handle bags, straps, and loose items. The Dual Mount adds a second attachment point for bulkier or heavier pieces.\u003c\/p\u003e\n\n\u003ch2\u003eMaterials and construction\u003c\/h2\u003e\n\u003cp\u003eAll components are molded from US-sourced HDPE plastic. HDPE is impact-resistant and holds its shape under load, making it a practical choice for gear that gets tossed, dropped, and used daily. The panel and mounts are finished to accept the adapter system without play or rattle once seated.\u003c\/p\u003e\n\n\u003ch2\u003eIntended use\u003c\/h2\u003e\n\u003cp\u003eMount the MWS Panel on any standard drywall surface in a garage, mudroom, locker room, or equipment room. Arrange the included mounts in whatever configuration suits your gear. The adapter system means you can shift a mount to a new position on the panel in seconds, so the layout can evolve as your storage needs change. All hardware for a standard drywall installation ships in the box.\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cdiv class=\"quick-answer\"\u003e\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Tactical Walls\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e ModWall Athletics Package\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSKU:\u003c\/strong\u003e mwSPORTath\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e US-sourced HDPE plastic\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIncluded:\u003c\/strong\u003e 1 MWS Panel, 1 Headwear Mount, 1 MWS Hanger, 1 Dual Mount, 1 pair of Glove Mounts, 1 Shoe Mount, 1 Hook, 2 MB1 adapters, 2 MB2 adapters, 6 drywall screws, 2 hex keys\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMounting surface:\u003c\/strong\u003e Standard drywall\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCountry of material origin:\u003c\/strong\u003e USA (HDPE)\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/div\u003e\n\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\n\u003ch3\u003eWhat is included in the box?\u003c\/h3\u003e\n\u003cp\u003eThe package includes one MWS Panel, one Headwear Mount, one MWS Hanger, one Dual Mount, one pair of Glove Mounts, one Shoe Mount, one Hook, two MB1 adapters, two MB2 adapters, six drywall screws, and two hex keys. Everything needed for a standard drywall installation ships with the kit.\u003c\/p\u003e\n\n\u003ch3\u003eWhat types of gear can I store on this system?\u003c\/h3\u003e\n\u003cp\u003eThe included mounts are designed for helmets and headwear, gloves, footwear, bags, and straps. The Hook and MWS Hanger handle miscellaneous items. The Dual Mount adds capacity for bulkier pieces. The adapter system is compatible with other ModWall Sport accessories sold separately, so the system can grow beyond the athletics configuration.\u003c\/p\u003e\n\n\u003ch3\u003eCan I reconfigure the mounts after installation?\u003c\/h3\u003e\n\u003cp\u003eYes. The MB1 and MB2 adapters allow each mount to be repositioned anywhere on the MWS Panel without removing the panel from the wall or patching holes. Reposition a mount by releasing the adapter and clicking it into a new location on the panel grid.\u003c\/p\u003e\n\n\u003ch3\u003eWhat surface does this mount to?\u003c\/h3\u003e\n\u003cp\u003eThe MWS Panel mounts to standard drywall using the six included drywall screws. For other wall surfaces such as concrete, plywood, or masonry, additional hardware not included in this kit would be required. Contact us if you have questions about your specific installation.\u003c\/p\u003e\n\n\u003ch3\u003eWhat is the panel made of?\u003c\/h3\u003e\n\u003cp\u003eAll components are molded from US-sourced HDPE plastic. HDPE is a dense, impact-resistant thermoplastic that holds its shape under the daily load of sports gear without cracking or warping.\u003c\/p\u003e\n\n\u003c\/div\u003e","brand":"Tactical Walls","offers":[{"title":"Default Title","offer_id":67013349343603,"sku":"mwSPORTath","price":226.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1926\/7025\/files\/DSC_9145w-scaled-sq.jpg?v=1790727393"},{"product_id":"tactical-walls-modwall-air-tool-rack","title":"Tactical Walls ModWall Air Tool Rack Wall Mount Organizer","description":"\u003cdiv class=\"rte\"\u003e\n\n\u003cp\u003eThe Tactical Walls ModWall Air Tool Rack is a dedicated wall-mount organizer for pneumatic tools, designed to attach directly to any ModWall panel. Built from US-sourced HDPE, the rack holds impact wrenches, spray guns, grease guns, and comparable air tools securely on the wall, keeping them visible and within arm's reach in a garage, workshop, or professional service bay. The kit ships complete with one Air Tool Plate, two Triangle Supports with hardware, and instructions.\u003c\/p\u003e\n\n\u003ch2\u003eWho this is for\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eGarage and home workshop owners\u003c\/strong\u003e who want pneumatic tools off the floor and organized on a ModWall panel system.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eProfessional technicians and service bay operators\u003c\/strong\u003e who need fast, clutter-free access to impact wrenches, spray guns, and grease guns during a workday.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eModWall system builders\u003c\/strong\u003e expanding an existing panel setup with dedicated air tool storage that matches the rest of their wall organization.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFeatures and design\u003c\/h2\u003e\n\u003cp\u003eThe Air Tool Rack mounts flush to any ModWall panel using two Triangle Supports and the included hardware, creating a stable shelf-style cradle sized for full-size pneumatic tools. The open design keeps each tool visible at a glance, so you spend less time searching and more time working. Because the rack attaches to the ModWall panel system rather than directly to studs or drywall, it repositions without patching holes whenever your layout changes.\u003c\/p\u003e\n\u003cp\u003eThe HDPE construction balances load-bearing strength with a surface that will not scratch or mar tool housings and finishes. That combination makes it equally useful for delicate spray guns and heavy impact wrenches on the same wall.\u003c\/p\u003e\n\n\u003ch2\u003eMaterials and construction\u003c\/h2\u003e\n\u003cp\u003eThe rack is manufactured from US-sourced high-density polyethylene (HDPE). HDPE offers high impact resistance and does not corrode, making it a practical choice for shop environments where tools are handled frequently and surfaces are exposed to oils, solvents, and humidity. The material is firm enough to bear the weight of heavy pneumatic tools yet smooth enough to protect painted or coated tool bodies from surface damage.\u003c\/p\u003e\n\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cp\u003eThe ModWall Air Tool Rack is compatible with all ModWall panel systems. If you are building a new wall or adding to an existing ModWall setup, this rack integrates without modification. For a complete wall-mounted tool organization solution, the ModWall Project Package pairs directly with this rack and other ModWall accessories.\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cdiv class=\"quick-answer\"\u003e\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Tactical Walls\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e ModWall Air Tool Rack\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSKU:\u003c\/strong\u003e MWPATR\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e US-sourced HDPE (high-density polyethylene)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCompatible with:\u003c\/strong\u003e All ModWall panel systems\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIncluded:\u003c\/strong\u003e 1 Air Tool Plate, 2 Triangle Supports with hardware, instructions\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCountry of material origin:\u003c\/strong\u003e USA (US-sourced HDPE)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eProduct type:\u003c\/strong\u003e ModWall Sport Accessory\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/div\u003e\n\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\n\u003ch3\u003eWhat air tools does this rack fit?\u003c\/h3\u003e\n\u003cp\u003eThe rack accommodates any air tool, including impact wrenches, spray guns, and grease guns. The open cradle design is not sized to a single tool profile, so it works with a range of pneumatic tool shapes and sizes commonly found in garages and professional service bays.\u003c\/p\u003e\n\n\u003ch3\u003eDoes this rack work with my existing ModWall panels?\u003c\/h3\u003e\n\u003cp\u003eYes. The ModWall Air Tool Rack is compatible with all ModWall panel systems, so it integrates directly into any existing setup without additional adapters or modifications.\u003c\/p\u003e\n\n\u003ch3\u003eWhat is included in the box?\u003c\/h3\u003e\n\u003cp\u003eThe kit includes one Air Tool Plate, two Triangle Supports with mounting hardware, and an instruction sheet. No additional hardware purchases are required to mount the rack to a ModWall panel.\u003c\/p\u003e\n\n\u003ch3\u003eWhat is the rack made of, and will it scratch my tools?\u003c\/h3\u003e\n\u003cp\u003eThe rack is made from US-sourced HDPE. The material is firm enough to support heavy pneumatic tools and smooth enough that it will not scratch or mar tool housings and finishes, including painted or coated surfaces.\u003c\/p\u003e\n\n\u003ch3\u003eCan I reposition the rack if I reorganize my wall?\u003c\/h3\u003e\n\u003cp\u003eYes. Because the rack attaches to the ModWall panel rather than directly to drywall or studs, you can move it to a different position on the panel without leaving holes in the wall. Repositioning requires only the included hardware and no patching or repainting.\u003c\/p\u003e\n\n\u003c\/div\u003e","brand":"Tactical Walls","offers":[{"title":"Default Title","offer_id":67013349638515,"sku":"MWPATR","price":30.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1926\/7025\/files\/DSC_1416s-scaled-sq.jpg?v=1790727445"},{"product_id":"tactical-walls-modwall-large-tool-rack","title":"Tactical Walls ModWall Large Tool Rack HDPE Wall Mount Organizer","description":"\u003cdiv class=\"rte\"\u003e\n\n\u003cp\u003eThe Tactical Walls ModWall Large Tool Rack is a wall-mounted tool organizer made from US-sourced HDPE, designed to hold oversized hand tools and power tools in a fixed, visible position. It mounts directly to any ModWall panel system and ships with one Large Tool Plate, two Triangle Supports, and all necessary mounting hardware. Suitable for garages, workshops, and professional workspaces, it keeps hammers, mallets, drills, T-squares, and specialty tools organized and within reach.\u003c\/p\u003e\n\n\u003ch2\u003eWho this is for\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWorkshop owners\u003c\/strong\u003e who need a dedicated wall-mount solution for bulky hand tools and power tools that don't fit standard pegboard hooks.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eGarage organizers\u003c\/strong\u003e building out a modular wall system and looking for a compatible rack that handles their heaviest, most-used tools.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eProfessionals and tradespeople\u003c\/strong\u003e who want tools stored visibly and accessibly so nothing gets buried in a drawer or left on a bench.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFeatures and design\u003c\/h2\u003e\n\u003cp\u003eThe Large Tool Rack accepts a wide range of oversized tools in multiple configurations. Hammers, mallets, drills, T-squares, and other specialty tools seat securely on the Large Tool Plate, held in place by two Triangle Supports that distribute load and prevent shifting. The open-face design keeps every tool visible at a glance, so you spend less time searching and more time working.\u003c\/p\u003e\n\u003cp\u003eHDPE construction gives the rack enough rigidity to support heavy tools without flexing, while the material's surface stays gentle on tool finishes. No sharp metal edges contact your equipment.\u003c\/p\u003e\n\n\u003ch2\u003eMaterials and construction\u003c\/h2\u003e\n\u003cp\u003eThe rack is manufactured from US-sourced high-density polyethylene (HDPE). HDPE offers a high strength-to-weight ratio, resistance to moisture and common shop chemicals, and a surface that won't scratch or mar tool handles and housings. The included Triangle Supports are formed from the same material, keeping the assembly consistent and corrosion-free.\u003c\/p\u003e\n\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cp\u003eThe ModWall Large Tool Rack is compatible with all ModWall panel systems. If you are building out a full wall-mounted tool organizer, it pairs with the ModWall Project Package and other ModWall Sport Accessories. Mounting hardware is included, so no additional fasteners are required for installation on a compatible ModWall panel.\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cdiv class=\"quick-answer\"\u003e\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Tactical Walls\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e ModWall Large Tool Rack\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSKU:\u003c\/strong\u003e MWPLTR\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e US-sourced HDPE (high-density polyethylene)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCompatible with:\u003c\/strong\u003e All ModWall panel systems\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIncluded:\u003c\/strong\u003e 1 × Large Tool Plate, 2 × Triangle Supports, mounting hardware\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCountry of material origin:\u003c\/strong\u003e USA (US-sourced HDPE)\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/div\u003e\n\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\n\u003ch3\u003eWhat tools does this rack hold?\u003c\/h3\u003e\n\u003cp\u003eIt holds large hand tools and power tools including hammers, mallets, drills, T-squares, and specialty oversized tools. The rack accommodates multiple configurations, so the exact arrangement depends on the tools you are storing. If you are unsure whether a specific tool will fit, contact us and we can help.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's included in the box?\u003c\/h3\u003e\n\u003cp\u003eThe ModWall Large Tool Rack ships with one Large Tool Plate, two Triangle Supports, and all mounting hardware needed for installation on a compatible ModWall panel. No additional fasteners are required.\u003c\/p\u003e\n\n\u003ch3\u003eIs this compatible with all ModWall panels?\u003c\/h3\u003e\n\u003cp\u003eYes. The Large Tool Rack is compatible with all ModWall panel systems, including the ModWall Project Package. It is designed as part of the ModWall Sport Accessories line and integrates directly with any ModWall panel without modification.\u003c\/p\u003e\n\n\u003ch3\u003eWhat is the rack made of?\u003c\/h3\u003e\n\u003cp\u003eIt is made from US-sourced HDPE. HDPE is moisture-resistant, chemical-resistant, and firm enough to support heavy tools without flexing. The material's surface is also gentle enough to avoid scratching tool finishes and housings.\u003c\/p\u003e\n\n\u003ch3\u003eCan I use this in a garage or outdoor workshop?\u003c\/h3\u003e\n\u003cp\u003eYes. HDPE is moisture-resistant and holds up well in garage and workshop environments where humidity, dust, and occasional chemical exposure are common. Installation requires a compatible ModWall panel already mounted to the wall.\u003c\/p\u003e\n\n\u003c\/div\u003e","brand":"Tactical Walls","offers":[{"title":"Default Title","offer_id":67013349900659,"sku":"MWPLTR","price":27.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1926\/7025\/files\/DSC_1419s-scaled-sq.jpg?v=1790727496"},{"product_id":"vmod-bronco-magnetic-license-plate-mount","title":"Tactical Walls VMod Bronco Magnetic License Plate Mount","description":"\u003cdiv class=\"rte\"\u003e\n\u003cp\u003eThe Tactical Walls VMod Bronco Magnetic License Plate Mount is an HDPE plastic mount designed specifically for base-model 2021–2024 6th Generation Ford Broncos. Four rare-earth magnets secure the mount to the Bronco's steel front bumper, holding a standard US license plate firmly in place while allowing quick, tool-free removal whenever needed. The mount accommodates standard license plate frames and installs without drilling or permanent modification.\u003c\/p\u003e\n\n\u003ch2\u003eWho this is for\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFord Bronco owners\u003c\/strong\u003e who want a clean, removable license plate solution without drilling into their front bumper.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOff-road and overlanding enthusiasts\u003c\/strong\u003e who need to pull the plate quickly before hitting the trail and reinstall it just as fast.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBronco customizers\u003c\/strong\u003e looking for a low-profile, factory-clean aesthetic that still leaves room for a license plate frame.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFeatures and design\u003c\/h2\u003e\n\u003cp\u003eThe VMod Bronco Plate Mount attaches to the steel front bumper of the 6th Generation Ford Bronco using four rare-earth magnets. The magnetic connection is strong enough to hold the plate securely during normal driving while remaining easy to remove by hand when desired. The HDPE plastic body resists impact and weathering, keeping the mount looking clean over time.\u003c\/p\u003e\n\u003cp\u003eThe mount is sized around the standard US license plate format and includes clearance for aftermarket license plate frames. No tools, adhesives, or fasteners are required for installation or removal. Note: this mount is not compatible with Broncos equipped with the optional forward-facing radar system, as the mount will interfere with radar functionality.\u003c\/p\u003e\n\n\u003ch2\u003eMaterials and construction\u003c\/h2\u003e\n\u003cp\u003eThe body is molded from HDPE (high-density polyethylene) plastic, a material known for stiffness, UV resistance, and durability in outdoor environments. The four embedded rare-earth magnets provide the holding force against the Bronco's steel front bumper. The overall shipment weight is 2.5 lbs, with package dimensions of 11.5 x 5.5 x 3 inches.\u003c\/p\u003e\n\n\u003ch2\u003eIntended use\u003c\/h2\u003e\n\u003cp\u003eThis mount is purpose-built for the base-model 2021–2024 Ford Bronco (6th Generation) without the optional forward-facing radar. It is not a universal fit and is not designed for other vehicle makes or models. Use it on vehicles where the front bumper is steel and the radar option is absent.\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cdiv class=\"quick-answer\"\u003e\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Tactical Walls\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e VMod Bronco Magnetic License Plate Mount\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSKU:\u003c\/strong\u003e VMODBRONCOplatemt\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e HDPE plastic with four rare-earth magnets\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePlate compatibility:\u003c\/strong\u003e Standard US license plate; accommodates license plate frames\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eVehicle compatibility:\u003c\/strong\u003e Base-model 2021–2024 Ford Bronco (6th Generation) without forward-facing radar option\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAttachment method:\u003c\/strong\u003e Magnetic (adheres to steel front bumper); no tools or fasteners required\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShipment weight:\u003c\/strong\u003e 2.5 lbs\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShipment dimensions:\u003c\/strong\u003e 11.5 x 5.5 x 3 in\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/div\u003e\n\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\n\u003ch3\u003eDoes this mount require drilling or permanent modification to the Bronco?\u003c\/h3\u003e\n\u003cp\u003eNo. The mount attaches entirely by magnetic force to the steel front bumper. No drilling, adhesives, or fasteners are needed, and removal leaves no marks on the vehicle.\u003c\/p\u003e\n\n\u003ch3\u003eWill this fit my license plate frame?\u003c\/h3\u003e\n\u003cp\u003eYes. The mount is designed around the standard US license plate size and includes clearance for license plate frames.\u003c\/p\u003e\n\n\u003ch3\u003eIs this compatible with all Ford Bronco model years?\u003c\/h3\u003e\n\u003cp\u003eIt is designed specifically for base-model 2021–2024 Ford Broncos (6th Generation). It is not designed for other model years or other vehicle makes and models.\u003c\/p\u003e\n\n\u003ch3\u003eCan I use this on a Bronco with the optional forward-facing radar?\u003c\/h3\u003e\n\u003cp\u003eNo. The mount is not recommended for Broncos equipped with the optional forward-facing radar, as it will interfere with the radar system's functionality.\u003c\/p\u003e\n\n\u003ch3\u003eWhat is the mount made of?\u003c\/h3\u003e\n\u003cp\u003eThe body is molded from HDPE plastic. Four rare-earth magnets are embedded in the mount to provide holding force against the Bronco's steel front bumper.\u003c\/p\u003e\n\n\u003ch3\u003eHow easy is it to remove the plate when needed?\u003c\/h3\u003e\n\u003cp\u003eRemoval is tool-free and by hand. The magnetic attachment holds the plate securely during normal driving but releases easily when you choose to take it off.\u003c\/p\u003e\n\n\u003c\/div\u003e","brand":"Tactical Walls","offers":[{"title":"Default Title","offer_id":67013350261107,"sku":"VMODBRONCOplatemt","price":85.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1926\/7025\/files\/DSC_9806g2s-sq.jpg?v=1790727544"},{"product_id":"tactical-walls-modwall-project-package-tool-storage","title":"Tactical Walls ModWall Project Package Wall-Mounted Tool Storage System","description":"\u003cdiv class=\"rte\"\u003e\n\n\u003cp\u003eThe Tactical Walls ModWall Project Package is a complete wall-mounted tool storage system built for garages, shops, and professional workspaces. One 48\" x 22\" x 0.5\" HDPE panel anchors directly to wall studs and ships with eleven accessories covering tool racks, driver racks, an air tool rack, a wrench rack, a hook, and three enclosed bins, giving you a single centralized location for every tool in your collection. The system expands over time with additional ModWall panels and accessories.\u003c\/p\u003e\n\n\u003ch2\u003eWho this is for\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eGarage and shop owners\u003c\/strong\u003e who want tools visible and within arm's reach instead of buried in drawers or toolboxes.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTradespeople and hobbyists\u003c\/strong\u003e who need a scalable, wall-mounted organization system that grows with their tool collection.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAnyone setting up a dedicated workspace\u003c\/strong\u003e who wants a clean, professional-grade storage solution that installs with basic tools and included hardware.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFeatures and design\u003c\/h2\u003e\n\u003cp\u003eThe ModWall Project Package centers on a single modular panel that mounts flush to wall studs. Every accessory in the package clips directly onto the panel, keeping tools off the bench and at eye level. The layout accommodates large hand tools, small hand tools, drivers, power tools, air tool accessories, wrenches, and loose small parts, all on one surface.\u003c\/p\u003e\n\u003cp\u003eThe system is fully expandable. Additional ModWall panels and accessories attach alongside the original panel, so the storage footprint grows as your tool collection does without requiring a new mounting approach.\u003c\/p\u003e\n\n\u003ch2\u003eMaterials and construction\u003c\/h2\u003e\n\u003cp\u003eThe panel and accessories are made from US-sourced HDPE (high-density polyethylene). HDPE carries the structural load of a full tool collection without warping, cracking, or absorbing moisture, making it a practical choice for garage and shop environments where temperature and humidity fluctuate.\u003c\/p\u003e\n\n\u003ch2\u003eIntended use\u003c\/h2\u003e\n\u003cp\u003eMount the panel to exposed wall studs in a garage, workshop, or utility room using the included hardware and instructions. No specialty tools are required for installation. Once mounted, the racks and bins clip onto the panel in any configuration that suits your workflow. The two Large Tool Racks each hold up to 5 large tools. The Small Tool Rack holds up to 5 small tools. The Large Driver Rack holds up to 16 drivers across various sizes and styles, and the Small Driver Rack holds up to 8. The Air Tool Rack provides 14 slots for air tool accessories. The Wrench Rack holds up to 11 standard or metric wrenches. The three Small Rack Bins (5.5\" x 4\" x 3\" each) keep loose items enclosed and sorted.\u003c\/p\u003e\n\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cp\u003eThe ModWall Project Package works with all ModWall accessories. Additional panels of the same format mount side by side to extend the system horizontally. Any ModWall-compatible rack, bin, or hook purchased separately clips onto the existing panel without adapters.\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cdiv class=\"quick-answer\"\u003e\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Tactical Walls\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSKU:\u003c\/strong\u003e MWPROJECTPKG\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePanel dimensions:\u003c\/strong\u003e 48\" x 22\" x 0.5\"\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePanel material:\u003c\/strong\u003e US-sourced HDPE\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Direct to wall studs; hardware included\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIncluded:\u003c\/strong\u003e 1 ModWall Panel, 2 Large Tool Racks (5 tools each), 1 Small Tool Rack (5 tools), 1 Large Driver Rack (16 drivers), 1 Small Driver Rack (8 drivers), 1 Air Tool Rack (14 slots), 1 Wrench Rack (11 wrenches), 1 Hook, 3 Small Rack Bins (5.5\" x 4\" x 3\" each), mounting hardware, instructions\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eExpandable:\u003c\/strong\u003e Yes; compatible with all ModWall accessories and additional panels\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/div\u003e\n\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\n\u003ch3\u003eWhat's included in the box?\u003c\/h3\u003e\n\u003cp\u003eThe package includes one 48\" x 22\" ModWall Panel, two Large Tool Racks, one Small Tool Rack, one Large Driver Rack, one Small Driver Rack, one Air Tool Rack, one Wrench Rack, one Hook, three Small Rack Bins, mounting hardware, and installation instructions. Everything needed to complete a full wall-mounted tool storage setup ships together.\u003c\/p\u003e\n\n\u003ch3\u003eWhat tools do I need to install the panel?\u003c\/h3\u003e\n\u003cp\u003eBasic tools are all that's required. The panel mounts directly to wall studs using the included hardware and instructions, so no specialty equipment is necessary for a standard installation.\u003c\/p\u003e\n\n\u003ch3\u003eCan I expand the system later?\u003c\/h3\u003e\n\u003cp\u003eYes. The ModWall system is designed to grow over time. Additional panels mount alongside the original, and any ModWall-compatible accessory clips onto the panel without adapters. You can add racks, bins, and hooks as your storage needs increase.\u003c\/p\u003e\n\n\u003ch3\u003eWhat is the panel made of, and will it hold up in a garage environment?\u003c\/h3\u003e\n\u003cp\u003eThe panel and accessories are made from US-sourced HDPE. HDPE resists moisture and temperature swings common in garages and shops, and it carries the structural load of a full tool collection without warping or cracking.\u003c\/p\u003e\n\n\u003ch3\u003eHow many tools can the included racks hold?\u003c\/h3\u003e\n\u003cp\u003eCombined, the included racks hold up to 10 large tools across both Large Tool Racks, 5 small tools on the Small Tool Rack, 24 drivers across both Driver Racks, 14 air tool accessories, and 11 wrenches. The three enclosed bins handle loose small parts and accessories.\u003c\/p\u003e\n\n\u003ch3\u003eIs this compatible with other ModWall accessories sold separately?\u003c\/h3\u003e\n\u003cp\u003eYes. The panel accepts all ModWall accessories. Any rack, bin, or hook in the ModWall lineup clips directly onto the panel, so you can customize the layout or add capacity beyond what ships in this package.\u003c\/p\u003e\n\n\u003c\/div\u003e","brand":"Tactical Walls","offers":[{"title":"Default Title","offer_id":67013350293875,"sku":"MWPROJECTPKG","price":369.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1926\/7025\/files\/DSC_1404s-scaled-sq.jpg?v=1790727598"},{"product_id":"tactical-walls-modwall-mounting-block","title":"Tactical Walls ModWall Mounting Block HDPE Wall Accessory Base","description":"\u003cdiv class=\"rte\"\u003e\n\u003cp\u003eThe Tactical Walls ModWall Mounting Block is an HDPE replacement base and DIY foundation for the ModWall modular wall-organization system. It serves two purposes: swap it in to replace a worn mounting block on an existing ModWall accessory, or use it as a blank starting point to build a custom accessory that attaches directly to ModWall panels or Nano Mounts. The block ships with all hardware needed for installation, including two bolt lengths and an Allen key.\u003c\/p\u003e\n\n\u003ch2\u003eWho this is for\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eModWall system owners\u003c\/strong\u003e who need a direct replacement base for a worn or damaged mounting block on an existing accessory.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDIY organizers\u003c\/strong\u003e who want to design and build a custom wall-mount accessory for tools, sporting gear, or tactical equipment such as helmets, vests, and belts.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eGear-room builders\u003c\/strong\u003e looking to expand a ModWall panel or Nano Mount setup with purpose-built storage solutions beyond the standard accessory lineup.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFeatures and design\u003c\/h2\u003e\n\u003cp\u003eThe mounting block is machined from HDPE (high-density polyethylene), a material chosen for its resistance to impact and long-term durability under the weight of stored gear. The block functions as the base layer that locks into ModWall panels and Nano Mounts, providing the secure attachment point that every ModWall accessory relies on.\u003c\/p\u003e\n\u003cp\u003eBecause the block ships as a standalone component, it gives builders a clean platform to fabricate custom hooks, shelves, or brackets sized to their specific gear. The included hardware covers two bolt-length options (3\/4 in and 1-1\/4 in), accommodating different accessory thicknesses without requiring a separate trip to the hardware store.\u003c\/p\u003e\n\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cp\u003eThe mounting block attaches to any standard ModWall panel or Nano Mount surface. It also serves as the direct replacement base for the following ModWall accessories:\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eModWall Vest Hangers\u003c\/strong\u003e (including Heavy Gear Hangers)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eModWall Strap Blocks\u003c\/strong\u003e (4x4 Offset variant only)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cdiv class=\"quick-answer\"\u003e\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Tactical Walls\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e ModWall Mounting Block\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSKU:\u003c\/strong\u003e MWMOUNTBLK\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e HDPE (high-density polyethylene)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShipment weight:\u003c\/strong\u003e 1 lb\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShipment dimensions:\u003c\/strong\u003e 2 x 2.5 x 0.5 in\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCompatible mounting surfaces:\u003c\/strong\u003e ModWall panels, Nano Mounts\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIncluded:\u003c\/strong\u003e 1 base mounting block, 2 x 3\/4 in Allen bolts, 2 x 1-1\/4 in Allen bolts, 1 Allen key\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/div\u003e\n\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\n\u003ch3\u003eWhat does the ModWall Mounting Block work with?\u003c\/h3\u003e\n\u003cp\u003eIt attaches to any ModWall panel or Nano Mount surface. It also serves as the replacement base for ModWall Vest Hangers, Heavy Gear Hangers, and the 4x4 Offset variant of ModWall Strap Blocks. If you are building a custom accessory from scratch, it works as a universal starting point for any accessory designed to mount on the ModWall system.\u003c\/p\u003e\n\n\u003ch3\u003eWhat is the block made of?\u003c\/h3\u003e\n\u003cp\u003eThe block is made from HDPE (high-density polyethylene), a dense, impact-resistant plastic commonly used in heavy-duty storage and industrial applications. It holds up under the weight of gear without cracking or deforming over time.\u003c\/p\u003e\n\n\u003ch3\u003eWhat hardware is included?\u003c\/h3\u003e\n\u003cp\u003eEach mounting block ships with two 3\/4 in Allen bolts, two 1-1\/4 in Allen bolts, and one Allen key. The two bolt lengths accommodate different accessory thicknesses so no additional hardware is needed for standard installations.\u003c\/p\u003e\n\n\u003ch3\u003eCan I use this to build my own custom wall accessory?\u003c\/h3\u003e\n\u003cp\u003eYes. The block is designed to function as a blank base for DIY ModWall accessories. Once built, the finished accessory attaches to any ModWall panel or Nano Mount the same way a factory accessory would. It works for decorative mounts, custom tool holders, gear hooks, or any other wall-organization solution you design.\u003c\/p\u003e\n\n\u003ch3\u003eDo I need any tools beyond what is included?\u003c\/h3\u003e\n\u003cp\u003eThe included Allen key handles the provided bolts. Any additional tools depend on what you are building or attaching. For a straight replacement swap on an existing accessory, the included hardware is sufficient.\u003c\/p\u003e\n\n\u003c\/div\u003e","brand":"Tactical Walls","offers":[{"title":"Default Title","offer_id":67013350588787,"sku":"MWMOUNTBLK","price":10.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1926\/7025\/files\/DSC_0975s-scaled-sq.jpg?v=1790727650"},{"product_id":"tactical-walls-modwall-small-driver-rack","title":"Tactical Walls ModWall Small Driver Rack Wall-Mounted Tool Organizer","description":"\u003cdiv class=\"rte\"\u003e\n\u003cp\u003eThe Tactical Walls ModWall Small Driver Rack is a wall-mounted HDPE tool organizer that holds up to 9 screwdrivers and ratchets on any ModWall panel. Designed for garages, workshops, and professional spaces, it keeps essential drivers visible and within arm's reach. The rack mounts directly to any ModWall panel system and ships with all required mounting hardware included.\u003c\/p\u003e\n\n\u003ch2\u003eWho this is for\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHome workshop owners\u003c\/strong\u003e who want tools off the bench and organized on the wall for faster access during projects.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eProfessionals and tradespeople\u003c\/strong\u003e who need a compact, reliable driver storage solution in a dedicated workspace.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eModWall system users\u003c\/strong\u003e who are building out a modular wall organization setup and need a purpose-built driver rack that integrates without adapters.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFeatures and design\u003c\/h2\u003e\n\u003cp\u003eThe Small Driver Rack holds up to 9 screwdrivers and ratchets in a slim, upright profile that keeps each tool individually visible. Because every slot is open-face, you can identify the exact driver you need at a glance and pull it without sorting through a drawer or toolbox. The rack mounts flush to any ModWall panel, so it sits close to the wall and does not project into your workspace.\u003c\/p\u003e\n\u003cp\u003eThe slim form factor makes this rack a practical choice for tighter wall sections where a larger organizer would not fit. It pairs naturally with other ModWall accessories to build a complete, modular tool wall.\u003c\/p\u003e\n\n\u003ch2\u003eMaterials and construction\u003c\/h2\u003e\n\u003cp\u003eThe rack is manufactured from high-density polyethylene (HDPE). HDPE is rigid enough to support the weight of standard screwdrivers and ratchets while remaining soft enough to protect tool finishes from scratching or marring. The material resists moisture and common workshop chemicals, making it a durable long-term storage solution in garage and shop environments.\u003c\/p\u003e\n\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cp\u003eThe Small Driver Rack is compatible with all ModWall panel systems, including the ModWall Project Panel. Mounting hardware is included in the box, so no additional fasteners are required for installation on an existing ModWall panel. For higher-capacity driver storage, the ModWall Large Driver Rack accepts more tools on the same panel system.\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cdiv class=\"quick-answer\"\u003e\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Tactical Walls\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e ModWall Small Driver Rack\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSKU:\u003c\/strong\u003e MWPSDR\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e HDPE (high-density polyethylene)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCapacity:\u003c\/strong\u003e Up to 9 screwdrivers and ratchets\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCompatibility:\u003c\/strong\u003e All ModWall panel systems\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIncluded:\u003c\/strong\u003e 1 x Small Driver Rack, mounting hardware\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/div\u003e\n\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\n\u003ch3\u003eWhat's included in the box?\u003c\/h3\u003e\n\u003cp\u003eThe box includes one Small Driver Rack and all mounting hardware needed to attach it to an existing ModWall panel. No additional fasteners or tools beyond a standard screwdriver are expected to be required for installation.\u003c\/p\u003e\n\n\u003ch3\u003eHow many tools does this rack hold?\u003c\/h3\u003e\n\u003cp\u003eIt holds up to 9 screwdrivers and ratchets. Each tool sits in its own slot, keeping them individually visible and easy to grab without sorting through a pile.\u003c\/p\u003e\n\n\u003ch3\u003eIs this compatible with my ModWall panel?\u003c\/h3\u003e\n\u003cp\u003eYes. The Small Driver Rack is compatible with all ModWall panel systems, including the ModWall Project Panel. If you are unsure whether your specific panel configuration is supported, contact us before ordering.\u003c\/p\u003e\n\n\u003ch3\u003eWhat is the rack made of?\u003c\/h3\u003e\n\u003cp\u003eIt is made from HDPE (high-density polyethylene), a material that is rigid enough to support tool weight while remaining soft enough to protect tool finishes from scratching. HDPE also resists moisture and common workshop chemicals.\u003c\/p\u003e\n\n\u003ch3\u003eWhat if I need more driver storage than this rack provides?\u003c\/h3\u003e\n\u003cp\u003eTactical Walls makes a Large Driver Rack for the same ModWall panel system. It accepts more tools and mounts the same way. Both racks can be used together on a single panel wall to scale storage capacity as your tool collection grows.\u003c\/p\u003e\n\n\u003c\/div\u003e","brand":"Tactical Walls","offers":[{"title":"Default Title","offer_id":67013350785395,"sku":"MWPSDR","price":20.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1926\/7025\/files\/DSC_1408s-scaled-sq_9124be0a-9126-43ec-9bf9-50208b8ab60c.jpg?v=1790727694"},{"product_id":"tactical-walls-modwall-rack-bin-set-wall-mounted-storage","title":"Tactical Walls ModWall Rack Bin Set Wall-Mounted Storage Organizer","description":"\u003cdiv class=\"rte\"\u003e\n\n\u003cp\u003eThe Tactical Walls ModWall Rack Bin Set is a wall-mounted storage bin system designed to mount directly onto ModWall panels, keeping small parts, hardware, tools, and tactical gear accessories visible and within arm's reach. Available in three configurations — Large Bin Set, Small Bin Set, and Adapter Plate Only — it slots into any ModWall panel groove without additional hardware, converting vertical wall space into organized, accessible storage for garages, workshops, and gear rooms.\u003c\/p\u003e\n\n\u003ch2\u003eWho this is for\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eGarage and workshop owners\u003c\/strong\u003e who want fast, visible access to small hardware, hand tools, and fasteners without digging through drawers.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTactical gear users\u003c\/strong\u003e who already run a ModWall panel system and need dedicated bins for helmet accessories, belt kit components, or vest hardware.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eExisting stackable-bin owners\u003c\/strong\u003e who want to move their current Uline-compatible desktop bins onto the wall without buying an entirely new storage system.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFeatures and design\u003c\/h2\u003e\n\u003cp\u003eEach set includes a Rack Bin Adapter Plate that slides into a ModWall panel groove, locking the bin securely in a vertical orientation. The adapter plate is also sold separately for users who already own compatible bins and only need the mounting interface. Installation requires no additional hardware beyond what is included.\u003c\/p\u003e\n\u003cp\u003eThe Large Bin measures 9.5\" x 6\" x 5\", offering enough volume for bulkier items such as carabiners, straps, or grouped hardware. The Small Bin measures 5.5\" x 4\" x 3\", suited for smaller fasteners, clips, or accessories that need to stay sorted and visible. Both bins sit open-face on the wall, so contents are immediately visible without opening a door or lifting a lid.\u003c\/p\u003e\n\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cp\u003eThe ModWall Rack Bin Set attaches exclusively to Tactical Walls ModWall panels. It does not mount to pegboard, slat wall, or other panel systems. The adapter plate is compatible with most standard stackable bin brands, including Uline, provided the rear mounting channel of the bin is at least 0.1\" thick. Users who already own qualifying bins can purchase the Adapter Plate Only variant and skip the included bin entirely.\u003c\/p\u003e\n\n\u003ch2\u003eIntended use\u003c\/h2\u003e\n\u003cp\u003eMount multiple bins at different heights across a ModWall panel to create a tiered small-parts station. Use the Large Bin for grouped gear items such as rolled straps, carabiners, or spare buckles, and the Small Bin for sorted fasteners, clips, or patch sets. The open-face design means contents stay visible at a glance, reducing time spent searching and keeping frequently used items consistently in the same spot.\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cdiv class=\"quick-answer\"\u003e\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Tactical Walls\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e ModWall Rack Bin Set\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eVariants:\u003c\/strong\u003e Large Bin Set, Small Bin Set, Adapter Plate Only\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLarge Bin dimensions:\u003c\/strong\u003e 9.5\" x 6\" x 5\"\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSmall Bin dimensions:\u003c\/strong\u003e 5.5\" x 4\" x 3\"\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAdapter plate mounting channel requirement:\u003c\/strong\u003e Rear channel at least 0.1\" thick\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCompatible bin brands:\u003c\/strong\u003e Most standard stackable bins including Uline (rear channel spec must be met)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePanel compatibility:\u003c\/strong\u003e Tactical Walls ModWall panels only\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHardware included:\u003c\/strong\u003e Yes (Adapter Plate Only variant includes mounting hardware)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShipment weight:\u003c\/strong\u003e 2 lbs\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShipment dimensions:\u003c\/strong\u003e 9\" x 6\" x 4\"\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/div\u003e\n\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\n\u003ch3\u003eWhat panels does the ModWall Rack Bin Set work with?\u003c\/h3\u003e\n\u003cp\u003eIt attaches exclusively to Tactical Walls ModWall panels. The adapter plate slides into a ModWall panel groove and locks in place without additional hardware. It is not compatible with pegboard, slat wall, or other panel systems.\u003c\/p\u003e\n\n\u003ch3\u003eCan I use bins I already own?\u003c\/h3\u003e\n\u003cp\u003eYes, provided the rear mounting channel of your existing bins is at least 0.1\" thick. The set is compatible with most standard stackable bin brands, including Uline. If your bins meet that spec, purchase the Adapter Plate Only variant and mount your current bins directly.\u003c\/p\u003e\n\n\u003ch3\u003eWhat is the difference between the Large and Small bin?\u003c\/h3\u003e\n\u003cp\u003eThe Large Bin measures 9.5\" x 6\" x 5\" and suits bulkier grouped items. The Small Bin measures 5.5\" x 4\" x 3\" and works well for smaller sorted parts, clips, or accessories. Both mount using the same adapter plate and attach to any ModWall panel groove.\u003c\/p\u003e\n\n\u003ch3\u003eDoes the Adapter Plate Only variant include mounting hardware?\u003c\/h3\u003e\n\u003cp\u003eYes. The Adapter Plate Only option includes mounting hardware. No separate purchase is needed to install it on a ModWall panel.\u003c\/p\u003e\n\n\u003ch3\u003eHow many bins can I mount on one ModWall panel?\u003c\/h3\u003e\n\u003cp\u003eThe number depends on the size of your ModWall panel and how many grooves are available. Each bin set occupies one groove position. Contact us if you need help planning a multi-bin layout for your specific panel configuration.\u003c\/p\u003e\n\n\u003c\/div\u003e","brand":"Tactical Walls","offers":[{"title":"only-adapter-plate","offer_id":67013352161651,"sku":"MWRBPLATE","price":17.99,"currency_code":"USD","in_stock":true},{"title":"small","offer_id":67013352194419,"sku":"MWRBSMALL","price":22.99,"currency_code":"USD","in_stock":true},{"title":"large","offer_id":67013352227187,"sku":"MWRBLARGE","price":32.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1926\/7025\/files\/DSC_0140s-sq.jpg?v=1790727748"},{"product_id":"tactical-walls-modwall-sport-fishing-rack","title":"Tactical Walls ModWall Sport Fishing Rack Wall Organizer","description":"\u003cdiv class=\"rte\"\u003e\n\u003cp\u003eThe Tactical Walls ModWall Sport Fishing Rack is a wall-mounted rod storage and display system designed to keep fishing rods organized upright and off the floor. The slotted 36-inch by 6-inch backplate anchors to any wall surface and accepts two fishing rack shelves, each with clearance holes up to 1.50 inches, supported by three shelf brackets with included hardware. The rack removes cleanly from the wall when needed, leaving the backplate in place. Made in the USA.\u003c\/p\u003e\n\n\u003ch2\u003eWho this is for\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAnglers with multiple rods:\u003c\/strong\u003e keeps rods upright, separated, and ready to grab without tangling or floor clutter.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDock, boathouse, and garage owners:\u003c\/strong\u003e a purpose-built wall solution that turns dead wall space into organized rod storage.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOutdoor enthusiasts pairing multiple gear types:\u003c\/strong\u003e pairs naturally alongside kayak gear wall mounts to consolidate all water-sport equipment in one dedicated area.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFeatures and design\u003c\/h2\u003e\n\u003cp\u003eThe ModWall Sport Fishing Rack displays rods vertically, keeping tips and handles protected and accessible. The slotted backplate is the foundation of the system: it stays on the wall permanently while the rack shelves can be removed and repositioned as your rod collection changes. Clearance holes on each shelf accept rod handles up to 1.50 inches in diameter, covering the majority of spinning, casting, and fly rod configurations.\u003c\/p\u003e\n\u003cp\u003eThe slotted backplate design is shared across the ModWall Sport lineup, so the Fishing Rack can share wall space with compatible kayak mounts and other ModWall Sport accessories. That modularity lets you build a single organized wall for all your water-sport gear rather than scattering storage across the garage.\u003c\/p\u003e\n\n\u003ch2\u003eMaterials and construction\u003c\/h2\u003e\n\u003cp\u003eThe backplate measures 36 inches wide by 6 inches tall by 0.5 inches thick and features a slotted profile that accepts ModWall Sport shelf supports. Three shelf supports with mounting hardware are included, along with additional hardware and printed instructions. The package ships complete: no separate hardware purchases required for a standard installation.\u003c\/p\u003e\n\n\u003ch2\u003eIntended use\u003c\/h2\u003e\n\u003cp\u003eInstall the backplate on a wall in a dock, boathouse, garage, or interior room. Slide the two fishing rack shelves onto the shelf supports. Feed rod handles through the clearance holes to hold each rod upright. When you need to transport or rearrange, the shelves lift off the backplate without tools, leaving the wall anchor undisturbed.\u003c\/p\u003e\n\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cp\u003eThe Fishing Rack shelves accept rod handles and grips up to 1.50 inches in diameter. The slotted backplate is compatible with other ModWall Sport accessories, including kayak wall mounts, allowing multiple storage systems to share a single wall run. Confirm your rod handle diameter against the 1.50-inch maximum clearance before ordering if you use oversized grips.\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cdiv class=\"quick-answer\"\u003e\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Tactical Walls\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLine:\u003c\/strong\u003e ModWall Sport\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSKU:\u003c\/strong\u003e mwSPORTfishpkg\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBackplate dimensions:\u003c\/strong\u003e 36 in x 6 in x 0.5 in (slotted)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShelf clearance holes:\u003c\/strong\u003e 1.50 in maximum diameter\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIncluded items:\u003c\/strong\u003e 1 slotted backplate, 2 fishing rack shelves, 3 shelf supports with hardware, additional hardware and instructions\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRemovable shelves:\u003c\/strong\u003e Yes — backplate remains on wall\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCountry of manufacture:\u003c\/strong\u003e USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/div\u003e\n\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\n\u003ch3\u003eWhat's included in the box?\u003c\/h3\u003e\n\u003cp\u003eThe package includes one slotted 36-inch by 6-inch by 0.5-inch backplate, two fishing rack shelves, three shelf supports with mounting hardware, additional hardware, and installation instructions. Everything needed for a standard wall installation ships in the box.\u003c\/p\u003e\n\n\u003ch3\u003eWhat rod handle diameter does this rack accept?\u003c\/h3\u003e\n\u003cp\u003eEach shelf has clearance holes with a maximum diameter of 1.50 inches. Most spinning, casting, and fly rod handles fall within this range. Measure your rod grip at its widest point before ordering if you use aftermarket or oversized grips.\u003c\/p\u003e\n\n\u003ch3\u003eCan the shelves be removed without taking down the whole system?\u003c\/h3\u003e\n\u003cp\u003eYes. The fishing rack shelves lift off the shelf supports independently, leaving the backplate mounted on the wall. This lets you reconfigure, clean, or transport rods without disturbing the wall anchor.\u003c\/p\u003e\n\n\u003ch3\u003eIs this compatible with other ModWall Sport accessories?\u003c\/h3\u003e\n\u003cp\u003eYes. The slotted backplate accepts other ModWall Sport accessories, including kayak gear wall mounts. Multiple backplates can be run side by side to create a larger organized wall for all your water-sport and outdoor gear.\u003c\/p\u003e\n\n\u003ch3\u003eWhere is this product made?\u003c\/h3\u003e\n\u003cp\u003eThe ModWall Sport Fishing Rack is made in the USA.\u003c\/p\u003e\n\n\u003ch3\u003eWhere can I install this rack?\u003c\/h3\u003e\n\u003cp\u003eIt works on any standard wall surface. Common installations include docks, boathouses, garages, and interior storage rooms. The backplate mounts to wall studs or with appropriate anchors for the wall material.\u003c\/p\u003e\n\n\u003c\/div\u003e","brand":"Tactical Walls","offers":[{"title":"Default Title","offer_id":67013352292723,"sku":"mwSPORTfishpkg","price":144.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1926\/7025\/files\/DSC_2807s-e1740599464355-sq.jpg?v=1790727802"},{"product_id":"tactical-walls-modwall-wrench-rack","title":"Tactical Walls ModWall Wrench Rack Wall Organizer","description":"\u003cdiv class=\"rte\"\u003e\n\u003cp\u003eThe Tactical Walls ModWall Wrench Rack is a dedicated wall-mount wrench organizer that holds up to 11 standard and metric wrenches, keeping them visible and within reach in any garage, workshop, or professional space. Manufactured from US-sourced HDPE, the rack is rigid enough to support a full wrench set while remaining soft enough to protect tool finishes. It mounts to any ModWall panel system using the included hardware, slotting directly into an existing modular wall organizer setup.\u003c\/p\u003e\n\n\u003ch2\u003eWho this is for\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHome garage owners\u003c\/strong\u003e who want their most-used wrenches off the workbench and on the wall, sorted and immediately visible.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWorkshop and trade professionals\u003c\/strong\u003e who need a fast-access wrench station that integrates with a larger modular tool wall.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eModular wall system builders\u003c\/strong\u003e already running ModWall panels who want a purpose-built wrench accessory that snaps into their existing layout.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFeatures and design\u003c\/h2\u003e\n\u003cp\u003eThe Wrench Rack holds up to 11 standard and metric wrenches in a single organized row. Open-slot construction keeps every size visible at a glance, so you grab the right wrench on the first reach rather than digging through a drawer. The rack eliminates the clutter of loose wrenches in toolboxes and keeps your most-used sizes at eye level and arm's length.\u003c\/p\u003e\n\u003cp\u003eMounting hardware is included. Installation onto any ModWall panel takes only the hardware in the box, with no additional fasteners or adapters required.\u003c\/p\u003e\n\n\u003ch2\u003eMaterials and construction\u003c\/h2\u003e\n\u003cp\u003eThe rack is molded from US-sourced high-density polyethylene (HDPE). HDPE provides the structural rigidity to hold a full set of wrenches without flexing under load, while its surface is smooth enough to avoid scratching or marring tool finishes over repeated use. The material resists moisture and common shop chemicals, making it a practical choice for garage and workshop environments.\u003c\/p\u003e\n\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cp\u003eThe ModWall Wrench Rack is compatible with all ModWall panel systems. If you are building out a complete wall-mounted tool organizer, it pairs directly with the ModWall Project Package and other ModWall Sport accessories. No additional adapters are needed for any panel in the ModWall lineup.\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cdiv class=\"quick-answer\"\u003e\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Tactical Walls\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e ModWall Wrench Rack\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSKU:\u003c\/strong\u003e MWPWR\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWrench capacity:\u003c\/strong\u003e Up to 11 standard and\/or metric wrenches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e US-sourced HDPE\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCompatibility:\u003c\/strong\u003e All ModWall panel systems\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIncluded:\u003c\/strong\u003e 1 x Wrench Rack, mounting hardware\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/div\u003e\n\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\n\u003ch3\u003eWhat ModWall panels is this rack compatible with?\u003c\/h3\u003e\n\u003cp\u003eIt is compatible with all ModWall panel systems. The rack mounts using the included hardware and requires no additional adapters, so it integrates directly into any existing ModWall layout.\u003c\/p\u003e\n\n\u003ch3\u003eHow many wrenches does the rack hold?\u003c\/h3\u003e\n\u003cp\u003eThe rack holds up to 11 wrenches. It accommodates both standard and metric sizes in the same row, so you can organize a mixed set without needing separate racks.\u003c\/p\u003e\n\n\u003ch3\u003eWhat is the rack made of?\u003c\/h3\u003e\n\u003cp\u003eIt is molded from US-sourced HDPE. The material is rigid enough to support a full wrench set under load and smooth enough to protect tool finishes from scratching during everyday use.\u003c\/p\u003e\n\n\u003ch3\u003eDoes the rack come with mounting hardware?\u003c\/h3\u003e\n\u003cp\u003eYes. Each Wrench Rack ships with mounting hardware included. No separate fasteners or adapters are needed to mount it to a ModWall panel.\u003c\/p\u003e\n\n\u003ch3\u003eCan I use this in a professional shop or only at home?\u003c\/h3\u003e\n\u003cp\u003eIt works in any setting where a ModWall panel is installed, including home garages, trade workshops, and professional service spaces. The open-slot design and wall-mount format suit any environment where fast wrench access matters.\u003c\/p\u003e\n\n\u003c\/div\u003e","brand":"Tactical Walls","offers":[{"title":"Default Title","offer_id":67013352620403,"sku":"MWPWR","price":25.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1926\/7025\/files\/DSC_1409s-scaled-sq_1514eb60-77c3-466f-bdf7-107c426fe4cf.jpg?v=1790727848"},{"product_id":"tactical-walls-modwall-archery-pack-wall-storage","title":"Tactical Walls ModWall Archery Pack Wall Storage System","description":"\u003cdiv class=\"rte\"\u003e\n\n\u003cp\u003eThe Tactical Walls ModWall Archery Pack is a complete modular wall storage system designed to hold up to 2 bows and their associated gear on a single 22\" x 48\" HDPE panel. Compatible with compound, recurve, and crossbow configurations, the pack ships with two horizontal rail racks, two Velcro strap blocks, mounting hardware, and instructions — everything needed to clear floor space and put archery gear at arm's reach. The panel mounts directly to wall studs and integrates with the full ModWall ecosystem for future expansion.\u003c\/p\u003e\n\n\u003ch2\u003eWho this is for\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eArchers and bowhunters\u003c\/strong\u003e who want their bows, quivers, and accessories stored securely and off the floor between sessions.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eGear-room and garage organizers\u003c\/strong\u003e looking for a modular, expandable wall system that grows with their kit over time.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHunters and outdoor enthusiasts\u003c\/strong\u003e who need quick, organized access to archery equipment before a day in the field.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFeatures and design\u003c\/h2\u003e\n\u003cp\u003eTwo horizontal rail racks cradle bows at a fixed horizontal position, keeping limbs and cams clear of shelves and other surfaces. A 3x3 flush-mount Velcro strap block and a 4x4 offset-mount Velcro strap block handle arrows, quivers, and any additional gear that can be strapped. Both strap block formats ship in the box, giving immediate flexibility for different accessory sizes and orientations.\u003c\/p\u003e\n\u003cp\u003eThe panel surface accepts all ModWall accessories, so the layout is fully reconfigurable. Additional panels attach side by side or stacked to scale the system as a collection grows.\u003c\/p\u003e\n\n\u003ch2\u003eMaterials and construction\u003c\/h2\u003e\n\u003cp\u003eThe panel and all included accessories are built from US-sourced HDPE plastic. HDPE is rigid enough to support the weight of full-size bows and loaded quivers while remaining soft enough at contact points to avoid scratching bow finishes or limb coatings. The material does not rust, corrode, or absorb moisture, making it suitable for garage, basement, and outbuilding installations.\u003c\/p\u003e\n\n\u003ch2\u003eIntended use\u003c\/h2\u003e\n\u003cp\u003eMount the 22\" x 48\" panel to wall studs using the included hardware. The installation requires only basic hand tools and follows the included step-by-step instructions. Once mounted, the horizontal racks and strap blocks click or strap into position on the panel face. The system is designed for indoor wall mounting in a dedicated gear room, garage, or storage area.\u003c\/p\u003e\n\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cp\u003eThe ModWall Archery Pack panel and all included accessories are compatible with the full ModWall panel and accessory lineup. Existing ModWall owners can add this pack to an installed system, and new owners can expand beyond this pack with any additional ModWall panels or accessories sold separately.\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cdiv class=\"quick-answer\"\u003e\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIncluded panel size:\u003c\/strong\u003e 22\" x 48\" x 0.5\"\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBow capacity:\u003c\/strong\u003e Up to 2 bows (compound, recurve, or crossbow)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIncluded racks:\u003c\/strong\u003e 2 x Horizontal Rail Racks\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIncluded strap blocks:\u003c\/strong\u003e 1 x 3x3 Velcro Strap Block (flush mount); 1 x 4x4 Velcro Strap Block (offset mount)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAlso included:\u003c\/strong\u003e Mounting hardware, instructions\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e US-sourced HDPE plastic\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShipment weight:\u003c\/strong\u003e 22 lbs\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShipment dimensions:\u003c\/strong\u003e 49\" x 23\" x 3\"\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCompatibility:\u003c\/strong\u003e All ModWall panels and accessories\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSKU:\u003c\/strong\u003e MWARCH\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/div\u003e\n\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\n\u003ch3\u003eWhat's included in the box?\u003c\/h3\u003e\n\u003cp\u003eThe pack includes one 22\" x 48\" x 0.5\" ModWall panel, two Horizontal Rail Racks, one 3x3 flush-mount Velcro Strap Block, one 4x4 offset-mount Velcro Strap Block, mounting hardware, and printed instructions. No additional purchases are required to get the system on the wall and holding gear on day one.\u003c\/p\u003e\n\n\u003ch3\u003eWhat bow types does this system support?\u003c\/h3\u003e\n\u003cp\u003eYes, all common bow types are supported. The horizontal rail racks are designed to cradle compound bows, recurve bows, and crossbows. Up to 2 bows can be stored on the single included panel.\u003c\/p\u003e\n\n\u003ch3\u003eCan I expand the system beyond two bows?\u003c\/h3\u003e\n\u003cp\u003eYes. The ModWall system is modular and expandable. Additional ModWall panels and accessories are sold separately and mount alongside or above the included panel. There is no fixed limit to how large the overall wall system can grow.\u003c\/p\u003e\n\n\u003ch3\u003eWhat tools do I need to install the panel?\u003c\/h3\u003e\n\u003cp\u003eBasic hand tools are all that is required. The panel mounts to wall studs using the included hardware and follows the included instructions. No specialty tools or professional installation is needed.\u003c\/p\u003e\n\n\u003ch3\u003eIs this compatible with existing ModWall panels I already own?\u003c\/h3\u003e\n\u003cp\u003eYes. The Archery Pack panel and all included accessories are fully compatible with the complete ModWall lineup. If you already have ModWall panels installed, the racks and strap blocks from this pack can be used on those panels as well.\u003c\/p\u003e\n\n\u003ch3\u003eWhat materials is this made of?\u003c\/h3\u003e\n\u003cp\u003eAll panels and accessories are made from US-sourced HDPE plastic. HDPE resists moisture, rust, and corrosion, and its surface is soft enough at contact points to protect bow finishes and limb coatings from scratching during storage.\u003c\/p\u003e\n\n\u003c\/div\u003e","brand":"Tactical Walls","offers":[{"title":"Default Title","offer_id":67013352718707,"sku":"MWARCH","price":288.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1926\/7025\/files\/DSC_6668s-scaled-sq.jpg?v=1790727905"},{"product_id":"tactical-walls-modwall-tactical-belt-mount","title":"Tactical Walls ModWall Tactical Belt Mount Panel Organizer","description":"\u003cdiv class=\"rte\"\u003e\n\n\u003cp\u003eThe Tactical Walls ModWall Tactical Belt Mount is a slim, low-profile wall mount designed to keep tactical belts, knife sheaths, and individual belt attachments organized and accessible on any ModWall panel. It secures a belt by its loop or attachment point for a stable, natural hang, and installs directly into the ModWall panel system with no additional hardware required. Included in the box: one Tactical Belt Wall Mount and mounting hardware.\u003c\/p\u003e\n\n\u003ch2\u003eWho this is for\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTactical gear users\u003c\/strong\u003e who want a dedicated, clutter-free spot for their belt and attached sheaths on a ModWall panel.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWorkshop and garage organizers\u003c\/strong\u003e looking for a low-profile mount that keeps belts, tool pouches, and slim attachments off the floor and within reach.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eVehicle and gear preppers\u003c\/strong\u003e who use ModWall panels in vehicles or storage areas and need a quick-access mount for belt-carried gear.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFeatures and design\u003c\/h2\u003e\n\u003cp\u003eThe Belt Mount's slim, low-profile form factor suits unloaded tactical belts, knife sheaths, and other slim belt attachments. It holds gear by the belt loop or attachment point, which keeps the belt oriented naturally and prevents it from sliding or bunching. The mount integrates directly with Tactical Walls ModWall panels, locking in place without loose fasteners or extra brackets.\u003c\/p\u003e\n\u003cp\u003eThe design is intentionally minimal. It adds almost no depth to the panel face, so adjacent mounts and accessories retain their full clearance. For heavier or fully loaded duty belt setups, the ModWall Duty Belt Holder is the appropriate upgrade.\u003c\/p\u003e\n\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cp\u003eThe Tactical Belt Mount is built for the Tactical Walls ModWall panel system. It works with any ModWall panel and requires no additional hardware beyond what is included. Knife sheaths and other slim belt attachments that hang from a loop or attachment point are compatible. Contact us if you need help confirming fitment with a specific ModWall panel configuration.\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cdiv class=\"quick-answer\"\u003e\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Tactical Walls\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e ModWall Tactical Belt Mount\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSKU:\u003c\/strong\u003e MWBELT\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCompatible system:\u003c\/strong\u003e Tactical Walls ModWall panels\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIntended use:\u003c\/strong\u003e Unloaded tactical belts, knife sheaths, slim belt attachments\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMount type:\u003c\/strong\u003e Loop and attachment-point compatible wall mount\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHardware included:\u003c\/strong\u003e Yes — mounting hardware included\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIncluded:\u003c\/strong\u003e 1x Tactical Belt Wall Mount, mounting hardware\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShipment weight:\u003c\/strong\u003e 1 lb\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShipment dimensions:\u003c\/strong\u003e 1 x 2 x 1 in\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/div\u003e\n\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\n\u003ch3\u003eWhat does this mount work with?\u003c\/h3\u003e\n\u003cp\u003eIt works with the Tactical Walls ModWall panel system. The mount locks into any ModWall panel without additional hardware. It is designed for unloaded tactical belts, knife sheaths, and slim belt attachments that hang from a loop or attachment point.\u003c\/p\u003e\n\n\u003ch3\u003eDoes this fit a heavy or fully loaded duty belt?\u003c\/h3\u003e\n\u003cp\u003eNo. This mount is designed for unloaded belts and slim attachments. For heavier, fully loaded duty belt setups, the ModWall Duty Belt Holder is the appropriate choice.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's included in the box?\u003c\/h3\u003e\n\u003cp\u003eYes, everything needed to mount is included. The box contains one Tactical Belt Wall Mount and the required mounting hardware. No separate hardware purchase is necessary.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the mount hold the belt?\u003c\/h3\u003e\n\u003cp\u003eIt holds the belt by its loop or attachment point, allowing the belt to hang in a natural, stable position. This prevents sliding or bunching and keeps attached sheaths and accessories oriented correctly.\u003c\/p\u003e\n\n\u003ch3\u003eCan I use multiple Belt Mounts on the same panel?\u003c\/h3\u003e\n\u003cp\u003eYes. Because the mount has a slim, low-profile design, it adds minimal depth to the panel face, preserving clearance for adjacent mounts and accessories on the same ModWall panel.\u003c\/p\u003e\n\n\u003c\/div\u003e","brand":"Tactical Walls","offers":[{"title":"Default Title","offer_id":67013353046387,"sku":"MWBELT","price":14.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1926\/7025\/files\/DSC_6040s-scaled-sq.jpg?v=1790727958"},{"product_id":"tactical-walls-modwall-sport-kayak-package","title":"Tactical Walls ModWall Sport Kayak Package Wall Organization Kit","description":"\u003cdiv class=\"rte\"\u003e\n\u003cp\u003eThe Tactical Walls ModWall Sport Kayak Package is a modular wall organization kit designed to keep kayaking gear off the floor and displayed within easy reach. The package mounts to standard drywall and includes a panel, dual mount, headwear mount, hanger, hook, two MB1 adapters, six drywall screws, and two hex keys — everything needed to build a dedicated kayaking station on a garage or mudroom wall. The system is part of the broader ModWall Sport lineup, which uses interchangeable mounts and adapters to let you reconfigure your wall layout as your gear collection changes.\u003c\/p\u003e\n\n\u003ch2\u003eWho this is for\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eKayakers and paddlers\u003c\/strong\u003e who want a dedicated wall station for paddles, PFDs, helmets, and dry bags rather than a pile on the garage floor.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOutdoor enthusiasts with multiple setups\u003c\/strong\u003e who need a modular, reconfigurable system that can grow alongside their gear collection.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHomeowners and renters with standard drywall\u003c\/strong\u003e who want a clean, tool-minimal installation using only the included screws and hex keys.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFeatures and design\u003c\/h2\u003e\n\u003cp\u003eThe ModWall Sport system is built around a slotted panel that accepts interchangeable mounts. The panel installs flat against the wall with the six included drywall screws, and every mount locks into the panel slots using the MB1 adapter system, so components can be repositioned without additional hardware. The dual mount handles bulkier items like paddles or dry bags, the headwear mount keeps helmets and caps visible and ventilated, and the hanger and hook add flexible hanging points for straps, leashes, and accessories.\u003c\/p\u003e\n\u003cp\u003eBecause all mounts share the same adapter standard, this kayak-specific configuration can be expanded later by adding ModWall Sport mounts for other outdoor activities. The two included hex keys cover both installation and any future reconfiguration.\u003c\/p\u003e\n\n\u003ch2\u003eIncluded items\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMWS Panel:\u003c\/strong\u003e 1\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDual Mount:\u003c\/strong\u003e 1\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHeadwear Mount:\u003c\/strong\u003e 1\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMWS Hanger:\u003c\/strong\u003e 1\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHook:\u003c\/strong\u003e 1\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMB1 Adapters:\u003c\/strong\u003e 2\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrywall Screws:\u003c\/strong\u003e 6\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHex Keys:\u003c\/strong\u003e 2\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cp\u003eThe MB1 adapter standard is shared across the ModWall Sport lineup, so mounts from other ModWall Sport packages install directly onto this panel without additional adapters. The panel mounts to standard drywall. For garages storing multiple outdoor setups, ModWall Sport fishing gear mounts complement this kayak configuration and install on the same panel type.\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cdiv class=\"quick-answer\"\u003e\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Tactical Walls\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e MWS Kayak Package V1\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSKU:\u003c\/strong\u003e mwSPORTkayak\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIncluded:\u003c\/strong\u003e 1 MWS Panel, 1 Dual Mount, 1 Headwear Mount, 1 MWS Hanger, 1 Hook, 2 MB1 Adapters, 6 Drywall Screws, 2 Hex Keys\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMount standard:\u003c\/strong\u003e MB1 adapter (ModWall Sport compatible)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWall type:\u003c\/strong\u003e Standard drywall\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHardware included:\u003c\/strong\u003e Yes — screws and hex keys\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/div\u003e\n\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\n\u003ch3\u003eWhat's included in the box?\u003c\/h3\u003e\n\u003cp\u003eThe package includes one MWS Panel, one Dual Mount, one Headwear Mount, one MWS Hanger, one Hook, two MB1 adapters, six drywall screws, and two hex keys. No additional tools or hardware are required for a standard drywall installation.\u003c\/p\u003e\n\n\u003ch3\u003eCan I add more mounts to this panel later?\u003c\/h3\u003e\n\u003cp\u003eYes. All ModWall Sport mounts use the MB1 adapter standard, so any compatible mount from the ModWall Sport lineup installs directly onto the included panel. You can expand or reconfigure the layout at any time without replacing the panel.\u003c\/p\u003e\n\n\u003ch3\u003eWhat types of kayaking gear does this organize?\u003c\/h3\u003e\n\u003cp\u003eIt depends on what you hang. The dual mount suits paddles and dry bags, the headwear mount holds helmets and caps, and the hanger and hook handle straps, leashes, and smaller accessories.\u003c\/p\u003e\n\n\u003ch3\u003eDoes this work on any wall surface?\u003c\/h3\u003e\n\u003cp\u003eThe panel is designed for standard drywall installation using the six included screws. Concrete, tile, or masonry walls would require anchors not included in this package. Contact us if you have questions about alternative installation surfaces.\u003c\/p\u003e\n\n\u003ch3\u003eCan I use this panel with mounts from other ModWall Sport packages?\u003c\/h3\u003e\n\u003cp\u003eYes. The MB1 adapter standard is shared across the ModWall Sport lineup, so mounts from other packages in the series are compatible with this panel. This makes it straightforward to combine kayak, fishing, and other outdoor gear configurations on a single wall section.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's the difference between this package and buying individual mounts?\u003c\/h3\u003e\n\u003cp\u003eThis package bundles the panel, a curated set of mounts chosen for kayaking gear, the MB1 adapters, and all installation hardware into a single purchase. Buying components individually would require selecting each mount and adapter separately and confirming compatibility. The package is the faster starting point for a dedicated kayak gear wall.\u003c\/p\u003e\n\n\u003c\/div\u003e","brand":"Tactical Walls","offers":[{"title":"Default Title","offer_id":67013353177459,"sku":"mwSPORTkayak","price":172.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1926\/7025\/files\/DSC_9277-scaled-sq.jpg?v=1790728048"},{"product_id":"tactical-walls-heavy-gear-hanger-vest-helmet-wall-mount","title":"Tactical Walls Heavy Gear Hanger Vest and Helmet Wall Mount","description":"\u003cdiv class=\"rte\"\u003e\n\n\u003cp\u003eThe Tactical Walls Heavy Gear Hanger is a wall-mounted storage system machined from 0.5-inch high-density polyethylene (HDPE) that holds a full kit of heavy tactical gear, including plate carriers, tactical vests, chest rigs, battle belts, motorcycle jackets, riding suits, and helmets. The hanger ships as a complete two-piece set (vest hanger plus helmet hanger) with a dual-mount adapter that installs to a single wall stud or clips onto any Tactical Walls ModWall panel. Available in Regular and Skeletonized finishes.\u003c\/p\u003e\n\n\u003ch2\u003eWho this is for\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTactical gear owners\u003c\/strong\u003e who want a dedicated, off-the-floor storage solution for plate carriers, vests, and helmets that keeps equipment organized and ready.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRiders and motorsport enthusiasts\u003c\/strong\u003e who need a sturdy wall mount capable of holding full-length riding suits, jackets, and helmets without sagging.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eModWall panel users\u003c\/strong\u003e who want a hanger that integrates directly into an existing modular wall system without additional hardware.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFeatures and design\u003c\/h2\u003e\n\u003cp\u003eThe Heavy Gear Hanger is machined from 0.5-inch HDPE, a material thick enough to carry the weight of fully loaded plate carriers and wet riding gear without bending or deforming over time. The profile is purpose-shaped to cradle a vest or carrier at the shoulders while a separate helmet hanger keeps headgear elevated and ventilated above the main load.\u003c\/p\u003e\n\u003cp\u003eTwo finish options let you match the hanger to your space. The Regular finish presents a clean, low-profile look. The Skeletonized finish removes material in a geometric pattern for a more aggressive aesthetic and a modest reduction in visual bulk on the wall.\u003c\/p\u003e\n\n\u003ch2\u003eDual installation system\u003c\/h2\u003e\n\u003cp\u003eA single included adapter handles both mounting scenarios. Fasten the adapter to one wall stud for a direct-to-wall installation that requires no ModWall panel. When your setup changes, remove the adapter and slide the hanger onto any ModWall panel instead. No additional hardware is needed for the transition, and the same mounting hardware package covers both configurations.\u003c\/p\u003e\n\n\u003ch2\u003eMaterials and construction\u003c\/h2\u003e\n\u003cp\u003eHDPE at 0.5-inch thickness is the core material choice here. It resists moisture, so gear can be stored wet after field use or a ride in the rain without warping the hanger or trapping odor-causing humidity against the wall. The machined construction (rather than injection-molded) produces consistent wall thickness and precise fitment on the ModWall panel interface.\u003c\/p\u003e\n\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cp\u003eThe Heavy Gear Hanger mounts to any standard wall stud using the included adapter and mounting hardware. It is also compatible with the full Tactical Walls ModWall panel lineup. Individual components (Vest Hanger and Helmet Hanger) are available separately for ModWall panel setups if you need to expand an existing configuration.\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cdiv class=\"quick-answer\"\u003e\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Tactical Walls\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e Heavy Gear Hanger\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e 0.5-inch high-density polyethylene (HDPE), machined\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFinish options:\u003c\/strong\u003e Regular; Skeletonized\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIncluded:\u003c\/strong\u003e 1x Helmet Hanger, 1x Vest Hanger, 1x Heavy Gear Hanger Adapter, mounting hardware\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInstallation:\u003c\/strong\u003e Single wall stud (direct-to-wall) or ModWall panel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShipment weight:\u003c\/strong\u003e 5 lbs\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShipment dimensions:\u003c\/strong\u003e 15 x 12 x 5 in\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSKU (Regular):\u003c\/strong\u003e COATHELMET\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSKU (Skeletonized):\u003c\/strong\u003e COATHELMETSKLT\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/div\u003e\n\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\n\u003ch3\u003eWhat gear can the Heavy Gear Hanger support?\u003c\/h3\u003e\n\u003cp\u003eIt is built to hold plate carriers, tactical vests, chest rigs, battle belts, motorcycle jackets, riding suits, and helmets. The 0.5-inch HDPE construction handles heavy loads wet or dry without bending or sagging, making it suitable for fully loaded carriers as well as bulky riding gear.\u003c\/p\u003e\n\n\u003ch3\u003eDoes it work without a ModWall panel?\u003c\/h3\u003e\n\u003cp\u003eYes. The included adapter mounts directly to a single wall stud, so no ModWall panel is required. If you later add a ModWall panel to your setup, remove the adapter and the hanger transitions to the panel without any additional hardware.\u003c\/p\u003e\n\n\u003ch3\u003eWhat is the difference between the Regular and Skeletonized finishes?\u003c\/h3\u003e\n\u003cp\u003eBoth finishes use the same 0.5-inch HDPE construction and carry the same load. The Regular finish has a solid, clean profile. The Skeletonized finish has material removed in a geometric pattern for a more aggressive look and reduced visual weight on the wall.\u003c\/p\u003e\n\n\u003ch3\u003eCan I buy the vest hanger and helmet hanger separately?\u003c\/h3\u003e\n\u003cp\u003eYes. The ModWall Vest Hanger and ModWall Helmet Hanger are each available individually for ModWall panel setups. The Heavy Gear Hanger bundle includes both pieces plus the direct-to-wall adapter and mounting hardware in a single package.\u003c\/p\u003e\n\n\u003ch3\u003eWhat is included in the box?\u003c\/h3\u003e\n\u003cp\u003eThe package includes one Helmet Hanger, one Vest Hanger, one Heavy Gear Hanger Adapter, and all mounting hardware needed for installation. Nothing additional is required to mount to a wall stud or an existing ModWall panel.\u003c\/p\u003e\n\n\u003ch3\u003eHow do I install it?\u003c\/h3\u003e\n\u003cp\u003eFor direct-to-wall installation, attach the included adapter to a single wall stud using the provided mounting hardware. For a ModWall panel, remove the adapter and mount the hanger directly to the panel. Both configurations use the same hardware package and require no special tools beyond a standard drill.\u003c\/p\u003e\n\n\u003c\/div\u003e","brand":"Tactical Walls","offers":[{"title":"Regular","offer_id":67013353275763,"sku":"COATHELMET","price":75.99,"currency_code":"USD","in_stock":true},{"title":"Skeletonized","offer_id":67013353308531,"sku":"COATHELMETSKLT","price":79.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1926\/7025\/files\/DSC_2805s-1-sq.jpg?v=1790728106"},{"product_id":"tactical-walls-modwall-case-adapters-hdpe-mount","title":"Tactical Walls ModWall Case Adapters HDPE Modular Case Mount","description":"\u003cdiv class=\"rte\"\u003e\n\n\u003cp\u003eThe Tactical Walls ModWall Case Adapter is a modular mounting solution that secures Pelican, Apache, Condition1, and similarly sized hard cases to any ModWall or VMod panel system. Built from US-sourced HDPE plastic, each adapter measures 2.875\" x 4.25\" x 0.5\" and ships with a Case Plate, a Quick-Release Plate, and all mounting hardware. The set mounts directly to ModWall panels or to wall studs, keeping gear cases organized at home and ready to transfer to a VMod vehicle system when needed. Available in Small and Large sizes.\u003c\/p\u003e\n\n\u003ch2\u003eWho this is for\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOutdoor and sporting enthusiasts\u003c\/strong\u003e who store helmets, optics, or field gear in hard cases and want those cases accessible on a wall panel rather than stacked on a shelf.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eVehicle-kit builders\u003c\/strong\u003e who run a VMod system and need a consistent, repeatable way to move cased gear between a home ModWall and a vehicle-mounted panel.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWorkshop and garage organizers\u003c\/strong\u003e who want hard cases for tools or electronics mounted flush to the wall on studs, off the floor and within arm's reach.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFeatures and design\u003c\/h2\u003e\n\u003cp\u003eThe Case Adapter uses a two-plate system: a Case Plate that attaches directly to the case body and a Quick-Release Plate that interfaces with the ModWall panel. Together they create a rigid, rattle-free connection that releases quickly when you need to grab the case and go. The HDPE mounting surface contacts the case without scratching or marring the finish, which matters for cases that carry optics, electronics, or other sensitive gear.\u003c\/p\u003e\n\u003cp\u003eDirect-to-stud mounting means the adapter is not limited to ModWall panels. It can anchor to any standard wall stud, giving it a place in garages, workshops, and utility rooms that do not run a full ModWall build. The flush fit keeps the case tight to the wall surface rather than cantilevered outward.\u003c\/p\u003e\n\n\u003ch2\u003eMaterials and construction\u003c\/h2\u003e\n\u003cp\u003eThe adapter is molded from US-sourced high-density polyethylene (HDPE). HDPE resists impact, moisture, and UV degradation, making it suitable for both indoor wall installations and outdoor VMod vehicle setups. The material does not corrode, which is relevant when the adapter is exposed to weather on a vehicle panel.\u003c\/p\u003e\n\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cp\u003eThe Case Adapter mounts to Tactical Walls ModWall panels and VMod vehicle systems. It is also compatible with wall studs for direct installation without a panel. On the case side, it works with Pelican, Apache, and Condition1 cases, as well as most other hard cases that accept through-bolt hardware. Installation requires drilling into the case. To preserve waterproof integrity after drilling, adding gaskets or grommets between the attachment screws and the case body is recommended.\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cdiv class=\"quick-answer\"\u003e\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Tactical Walls\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e ModWall Case Adapter\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSKU:\u003c\/strong\u003e MWCASESET\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 2.875\" x 4.25\" x 0.5\"\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShipment weight:\u003c\/strong\u003e 3 lbs\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShipment dimensions:\u003c\/strong\u003e 4\" x 4\" x 0.5\"\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e US-sourced HDPE plastic\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAvailable sizes:\u003c\/strong\u003e Small, Large\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCompatible systems:\u003c\/strong\u003e ModWall panels, VMod vehicle system, wall studs\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCompatible cases:\u003c\/strong\u003e Pelican, Apache, Condition1, and most hard cases accepting through-bolt hardware\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIncluded:\u003c\/strong\u003e 1x Case Plate, 1x Quick-Release Plate, mounting hardware, instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/div\u003e\n\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\n\u003ch3\u003eWhat's included in the box?\u003c\/h3\u003e\n\u003cp\u003eEach set includes one Case Plate, one Quick-Release Plate, mounting hardware, and printed instructions. The case itself is not included; the adapter is designed to work with customer-provided cases.\u003c\/p\u003e\n\n\u003ch3\u003eDoes installation permanently modify my case?\u003c\/h3\u003e\n\u003cp\u003eYes. Mounting the Case Plate requires drilling into the case body. To preserve the case's waterproof rating after drilling, adding gaskets or grommets between the attachment screws and the case is recommended. Plan the hole placement carefully before drilling.\u003c\/p\u003e\n\n\u003ch3\u003eCan I use this without a ModWall panel?\u003c\/h3\u003e\n\u003cp\u003eYes. The adapter mounts directly to wall studs, so a ModWall panel is not required for a fixed home or garage installation. For vehicle use, a compatible VMod system is needed.\u003c\/p\u003e\n\n\u003ch3\u003eWhich size should I choose, Small or Large?\u003c\/h3\u003e\n\u003cp\u003eIt depends on the case you are mounting. The adapter itself measures 2.875\" x 4.25\" x 0.5\". Contact us if you need help matching the size option to a specific case model before ordering.\u003c\/p\u003e\n\n\u003ch3\u003eIs the HDPE material suitable for outdoor or vehicle use?\u003c\/h3\u003e\n\u003cp\u003eYes. HDPE resists moisture, UV exposure, and impact, making it appropriate for outdoor VMod vehicle installations as well as indoor wall panels. It does not corrode, which extends its service life in exposed environments.\u003c\/p\u003e\n\n\u003ch3\u003eCan I transfer the case between my home ModWall and a vehicle VMod system?\u003c\/h3\u003e\n\u003cp\u003eYes. That is the core use case the system is designed for. The Case Plate stays on the case; the Quick-Release Plate interfaces with whichever ModWall or VMod panel you are mounting to, allowing the case to move between locations without re-drilling or re-mounting.\u003c\/p\u003e\n\n\u003c\/div\u003e","brand":"Tactical Walls","offers":[{"title":"Default Title","offer_id":67013353570675,"sku":"MWCASESET","price":15.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1926\/7025\/files\/DSC_2467s-sq.jpg?v=1790728162"},{"product_id":"tactical-walls-modwall-strap-blocks-panel-mount","title":"Tactical Walls ModWall Strap Blocks Modular Panel Mount Accessory","description":"\u003cdiv class=\"rte\"\u003e\n\n\u003cp\u003eThe Tactical Walls ModWall Strap Blocks are HDPE hook-and-loop strap mounts designed to attach directly to ModWall panels, securing helmets, first aid kits, tools, sporting gear, and virtually any tactical or vehicle gear in a stable, integrated fit. Available in two configurations, the 3x3 Flush Mount uses a 12-inch velcro strap for a low-profile setup, while the 4x4 Offset Mount uses an 18-inch strap with 1.75-inch spacer blocks for clearance around bulky or irregularly shaped items. No additional hardware is required beyond the included mounting hardware.\u003c\/p\u003e\n\n\u003ch2\u003eWho this is for\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eVehicle and fleet organizers\u003c\/strong\u003e who need a fast-access, rattle-free way to secure gear inside a truck, van, or utility vehicle fitted with a ModWall panel.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTactical and first-responder teams\u003c\/strong\u003e who mount helmets, medical kits, and load-bearing gear on a ModWall system and need a reliable strap solution that redeploys quickly.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWorkshop and garage users\u003c\/strong\u003e who want a flexible, repositionable mount for tools, sporting equipment, or irregularly shaped items on a ModWall panel.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFeatures and design\u003c\/h2\u003e\n\u003cp\u003eEach Strap Block mounts to a ModWall panel either vertically or horizontally, giving you full control over orientation without any modification to the panel itself. The hook-and-loop strap cinches around your gear and releases in seconds, making it practical for gear that moves in and out of rotation frequently. Because the blocks attach exclusively to ModWall panels, the fit is stable and integrated with no play or rattle.\u003c\/p\u003e\n\u003cp\u003eMultiple blocks can be combined along the same panel run to support longer or heavier items at multiple contact points. The HDPE construction is rigid enough to hold gear securely while remaining gentle on surface finishes, protecting coatings and painted surfaces from abrasion.\u003c\/p\u003e\n\n\u003ch2\u003eMaterials and construction\u003c\/h2\u003e\n\u003cp\u003eThe blocks are molded from U.S.-sourced HDPE plastic. HDPE offers a high strength-to-weight ratio, resists moisture and common solvents, and will not crack or deform under the clamping load of a tightened strap. The hook-and-loop strap material provides a secure closure that can be opened and re-secured repeatedly without losing grip strength.\u003c\/p\u003e\n\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cp\u003eThe ModWall Strap Blocks attach exclusively to Tactical Walls ModWall panels. They are not compatible with third-party pegboard, slat wall, or other modular panel systems. Both the 3x3 and 4x4 variants use the same ModWall attachment interface, so they can be mixed on a single panel alongside other ModWall accessories.\u003c\/p\u003e\n\n\u003ch2\u003eIntended use\u003c\/h2\u003e\n\u003cp\u003eChoose the 3x3 Flush Mount when panel space is limited or when a low-profile, close-to-panel hold is preferred for compact gear such as first aid pouches, small tool rolls, or folded straps. Choose the 4x4 Offset Mount when the item being secured has protruding features, such as a scoped optic, a helmet with rails, or a piece of sporting equipment with an irregular profile: the 1.75-inch spacer blocks create clearance so the strap can cinch evenly without rocking.\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cdiv class=\"quick-answer\"\u003e\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Tactical Walls\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e ModWall Strap Blocks\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eVariants:\u003c\/strong\u003e 3x3 Flush Mount (SKU: MW3X3STRAP) \/ 4x4 Offset Mount (SKU: MW4X4STRAP)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e3x3 Hanger dimensions:\u003c\/strong\u003e 3\" x 3\" x 1\/2\"\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e4x4 Hanger dimensions:\u003c\/strong\u003e 4\" x 4\" x 2\"\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e3x3 Strap length:\u003c\/strong\u003e 12\" hook and loop velcro strap\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e4x4 Strap length:\u003c\/strong\u003e 18\" hook and loop velcro strap\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e4x4 Spacer block height:\u003c\/strong\u003e 1.75\"\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e U.S.-sourced HDPE plastic\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShipment weight:\u003c\/strong\u003e 2 lbs\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMounting orientation:\u003c\/strong\u003e Vertical or horizontal\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePanel compatibility:\u003c\/strong\u003e Tactical Walls ModWall panels only\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIncluded:\u003c\/strong\u003e 1 Velcro Strap Block (3x3 or 4x4) + mounting hardware\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/div\u003e\n\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\n\u003ch3\u003eWhat ModWall panels do these strap blocks work with?\u003c\/h3\u003e\n\u003cp\u003eThese strap blocks attach exclusively to Tactical Walls ModWall panels. They are not designed to fit third-party pegboard, slat wall, or other modular panel systems. If you are unsure which ModWall panel you have, contact us and we can confirm compatibility before you order.\u003c\/p\u003e\n\n\u003ch3\u003eWhat is the difference between the 3x3 Flush Mount and the 4x4 Offset Mount?\u003c\/h3\u003e\n\u003cp\u003eThe 3x3 Flush Mount sits 1\/2 inch off the panel and uses a 12-inch strap, making it ideal for compact, flat-profile gear where panel space is at a premium. The 4x4 Offset Mount sits 2 inches off the panel with 1.75-inch spacer blocks and uses an 18-inch strap, providing clearance for bulky or irregularly shaped items that would otherwise rock or sit unevenly against the panel.\u003c\/p\u003e\n\n\u003ch3\u003eCan I use multiple strap blocks together on one item?\u003c\/h3\u003e\n\u003cp\u003eYes. Multiple strap blocks can be combined along a single panel run to secure longer or heavier items at multiple contact points, distributing the load and reducing movement.\u003c\/p\u003e\n\n\u003ch3\u003eWhat types of gear can I secure with these blocks?\u003c\/h3\u003e\n\u003cp\u003eThe strap blocks are designed for first aid kits, helmets, tool rolls, sporting equipment, vehicle gear, and virtually any item that fits within the strap's reach. The hook-and-loop closure opens and re-secures quickly, so they work well for gear that rotates in and out of use frequently.\u003c\/p\u003e\n\n\u003ch3\u003eWhat material are the blocks made from?\u003c\/h3\u003e\n\u003cp\u003eThe blocks are molded from U.S.-sourced HDPE plastic. HDPE is moisture-resistant, solvent-resistant, and rigid enough to hold gear securely while remaining gentle on surface finishes and coatings.\u003c\/p\u003e\n\n\u003ch3\u003eWhat is included in the box?\u003c\/h3\u003e\n\u003cp\u003eEach package includes one Velcro Strap Block in the selected size (3x3 or 4x4) and the mounting hardware needed to attach it to a ModWall panel. No additional hardware is required.\u003c\/p\u003e\n\n\u003c\/div\u003e","brand":"Tactical Walls","offers":[{"title":"3x3-flush-mount","offer_id":67013353800051,"sku":"MW3X3STRAP","price":34.99,"currency_code":"USD","in_stock":true},{"title":"4x4-offset-mount","offer_id":67013353832819,"sku":"MW4X4STRAP","price":50.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1926\/7025\/files\/MODWALL-COMPONENTS-PRINT-006-sq.jpg?v=1790728223"},{"product_id":"tactical-walls-modwall-panel-48x22-hdpe-wall-organization","title":"Tactical Walls ModWall Panel 48x22 HDPE Modular Wall Organization Panel","description":"\u003cdiv class=\"rte\"\u003e\n\n\u003cp\u003eThe Tactical Walls ModWall Panel is the foundation of any ModWall wall organization build. CNC-machined from 0.5\"-thick US-sourced High-Density Polyethylene (HDPE), each panel measures 48\" wide by 22\" tall and mounts directly to a wall to accept compatible ModWall accessories. Panels stack vertically or arrange side-by-side for unlimited horizontal expansion. Available in Black, Grey, or Tan. Each order includes one panel, mounting hardware, and installation instructions.\u003c\/p\u003e\n\n\u003ch2\u003eWho this is for\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eGear-room builders\u003c\/strong\u003e who want a clean, expandable wall system for organizing helmets, vests, belts, and tactical kit.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWorkshop and garage organizers\u003c\/strong\u003e who need a durable, wall-mounted panel that handles heavy tools and sporting equipment without sagging or cracking.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eVehicle prep and staging areas\u003c\/strong\u003e where a modular panel system keeps frequently accessed gear visible, ordered, and ready to grab.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFeatures and design\u003c\/h2\u003e\n\u003cp\u003eEach ModWall Panel is CNC-machined to tight tolerances from 0.5\"-thick HDPE sheet stock. HDPE is dense enough to support heavy gear loads while remaining inert to moisture, solvents, and temperature swings common in garages and utility rooms. The panel surface accepts the full range of ModWall-compatible accessories, giving you a reconfigurable layout without drilling new holes every time your storage needs change.\u003c\/p\u003e\n\u003cp\u003eTwo sets of 2\"x2\" integrated entry points are built into each panel. These openings allow cable routing, accessory anchoring, or ventilation depending on how you configure your build. The modular geometry means a single panel works as a standalone station or as one tile in a larger wall covering multiple panels wide and several panels tall.\u003c\/p\u003e\n\n\u003ch2\u003eMaterials and construction\u003c\/h2\u003e\n\u003cp\u003eThe HDPE used in every ModWall Panel is sourced in the United States. At 0.5\" thick, the material resists flex under load and holds fasteners securely without cracking. Unlike wood or metal alternatives, HDPE does not rust, rot, or absorb humidity, making it a practical choice for climate-variable spaces. The panel ships at approximately 15 lbs, with shipment dimensions of 49\" x 23\" x 2\".\u003c\/p\u003e\n\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cp\u003eModWall Panels are designed to work within the Tactical Walls ModWall ecosystem. Panels can be mounted individually, stacked vertically, or arranged side-by-side to cover larger wall areas. For builds that require a larger single panel, Tactical Walls offers an Oversized 4x8 ModWall Panel; contact us for a quote on that option.\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cdiv class=\"quick-answer\"\u003e\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Tactical Walls\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e ModWall Panel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePanel dimensions:\u003c\/strong\u003e 48\" W x 22\" H x 0.5\" thick\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e US-sourced High-Density Polyethylene (HDPE)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eColors available:\u003c\/strong\u003e Black, Grey, Tan\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIntegrated entry points:\u003c\/strong\u003e Two sets of 2\" x 2\" openings\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShipment weight:\u003c\/strong\u003e 15 lbs\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShipment dimensions:\u003c\/strong\u003e 49\" x 23\" x 2\"\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSold as:\u003c\/strong\u003e Individual panel with mounting hardware and instructions\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturing:\u003c\/strong\u003e CNC-machined\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/div\u003e\n\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\n\u003ch3\u003eWhat's included in the box?\u003c\/h3\u003e\n\u003cp\u003eEach order includes one ModWall Panel (48\" W x 22\" H), mounting hardware, and installation instructions. Accessories and additional panels are sold separately.\u003c\/p\u003e\n\n\u003ch3\u003eCan I expand my ModWall setup after the initial install?\u003c\/h3\u003e\n\u003cp\u003eYes. Panels are designed for modular expansion. You can add panels side-by-side horizontally or stack them vertically to grow your wall coverage over time without removing or replacing existing panels.\u003c\/p\u003e\n\n\u003ch3\u003eWhat is HDPE and why is it used here?\u003c\/h3\u003e\n\u003cp\u003eHigh-Density Polyethylene is a dense, rigid plastic that resists moisture, solvents, and temperature variation. At 0.5\" thick, it supports heavy gear loads without flexing, and it will not rust, rot, or crack the way wood or metal panels can in variable-humidity environments.\u003c\/p\u003e\n\n\u003ch3\u003eWhat can I store or organize on a ModWall Panel?\u003c\/h3\u003e\n\u003cp\u003eThe panel accepts compatible ModWall accessories and works well for organizing tactical gear such as helmets, plate carriers, and belts, as well as tools, sporting equipment, and vehicle kit. The reconfigurable accessory system means your layout can change as your storage needs do.\u003c\/p\u003e\n\n\u003ch3\u003eWhat are the 2\"x2\" integrated entry points for?\u003c\/h3\u003e\n\u003cp\u003eThe two sets of 2\"x2\" openings built into each panel allow for cable routing, accessory anchoring, or ventilation depending on your configuration. They are a standard feature on every panel regardless of color.\u003c\/p\u003e\n\n\u003ch3\u003eIs a larger panel available?\u003c\/h3\u003e\n\u003cp\u003eYes. Tactical Walls offers an Oversized 4x8 ModWall Panel for larger builds. Contact us and we can help you get a quote for that option.\u003c\/p\u003e\n\n\u003c\/div\u003e","brand":"Tactical Walls","offers":[{"title":"black","offer_id":67013354619251,"sku":"MWPANEL","price":199.99,"currency_code":"USD","in_stock":true},{"title":"grey","offer_id":67013354652019,"sku":"MWPANELDGREY","price":225.99,"currency_code":"USD","in_stock":true},{"title":"tan","offer_id":67013354684787,"sku":"MWPANELTAN","price":225.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1926\/7025\/files\/PanelsModWall-1-sq.jpg?v=1790728280"},{"product_id":"tactical-walls-modwall-ceiling-panel-strip-48x4","title":"Tactical Walls ModWall Ceiling Panel Strip 48x4 Modular Gear Organizer","description":"\u003cdiv class=\"rte\"\u003e\n\n\u003cp\u003eThe Tactical Walls ModWall Ceiling Panel Strip is a 48-inch by 4-inch HDPE modular panel designed to mount on any studded wall or ceiling, expanding your ModWall storage system overhead or along wall edges. At 0.5 inches thick, it matches the width of standard 48-inch ModWall panels exactly, functioning as a filler strip, a standalone ceiling addition, or a seamless extension of an existing ModWall layout. It ships with mounting hardware and instructions and is finished in an exclusive light grey suited to ceiling installations.\u003c\/p\u003e\n\n\u003ch2\u003eWho this is for\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eGear-room organizers\u003c\/strong\u003e who want to reclaim overhead space for helmets, vests, belts, and tactical accessories without adding floor or wall footprint.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWorkshop and garage users\u003c\/strong\u003e who need a slim, ceiling-mounted rail that integrates with an existing ModWall panel layout and accepts any ModWall accessory.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eVehicle-bay and utility-space owners\u003c\/strong\u003e looking for a clean, low-profile strip to organize sporting gear, tools, and equipment along ceiling joists or upper wall sections.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFeatures and design\u003c\/h2\u003e\n\u003cp\u003eThe Ceiling Panel Strip spans 48 inches wide and 4 inches tall, with a 0.5-inch profile that keeps it flush against the mounting surface. Multiple attachment points are spaced to fit any standard stud pattern, so installation works on 16-inch and 24-inch on-center framing without additional blocking. The light grey finish is specific to this panel and sets ceiling-mounted strips apart visually from wall panels below.\u003c\/p\u003e\n\u003cp\u003eBecause it shares the same 48-inch width as the full ModWall panel line, the strip slots in as a filler between panels or runs independently above a primary panel array to add accessory capacity at the ceiling line. Every ModWall accessory attaches to it without modification.\u003c\/p\u003e\n\n\u003ch2\u003eMaterials and construction\u003c\/h2\u003e\n\u003cp\u003eThe panel is made from US-sourced HDPE (high-density polyethylene) plastic. HDPE is rigid enough to hold gear securely under load while its surface is soft enough to protect the finish of items mounted against it. The material resists moisture and does not corrode, making it suitable for garage, basement, and utility environments where humidity fluctuates.\u003c\/p\u003e\n\n\u003ch2\u003eIntended use\u003c\/h2\u003e\n\u003cp\u003eMount the strip horizontally on a ceiling or upper wall section to hang helmets, tactical vests, belts, carabiners, tools, and sporting equipment using compatible ModWall accessories. It works as a standalone ceiling organizer or as a complement to a full ModWall panel wall. The 4-inch height keeps the strip unobtrusive while still providing a full row of accessory attachment points.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation safety note:\u003c\/strong\u003e Hanging heavy objects that are not properly fastened is not recommended. Falling hazards may occur. Install and use at your own risk.\u003c\/p\u003e\n\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cp\u003eThe Ceiling Panel Strip is compatible with every accessory in the ModWall accessory line. Its 48-inch width matches all standard ModWall panels, so it integrates into any existing ModWall configuration without gaps or adapters. Mounting hardware and instructions are included in the box.\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cdiv class=\"quick-answer\"\u003e\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Tactical Walls\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e ModWall Ceiling Panel Strip\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSKU:\u003c\/strong\u003e MWCPANEL\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 48 in x 4 in x 0.5 in\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e US-sourced HDPE plastic\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Exclusive light grey\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStud pattern compatibility:\u003c\/strong\u003e Fits any stud pattern\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eModWall accessory compatibility:\u003c\/strong\u003e Universal (all ModWall accessories)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIncluded:\u003c\/strong\u003e 1x Ceiling Panel Strip (48 in x 4 in), mounting hardware, instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/div\u003e\n\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\n\u003ch3\u003eWhat ModWall accessories work with this strip?\u003c\/h3\u003e\n\u003cp\u003eEvery accessory in the ModWall accessory line is compatible. The strip uses the same attachment interface as the full-size ModWall panels, so any hook, holder, or mount designed for the ModWall system attaches without modification.\u003c\/p\u003e\n\n\u003ch3\u003eDoes this strip fit alongside standard ModWall panels?\u003c\/h3\u003e\n\u003cp\u003eYes. The strip is 48 inches wide, matching the width of standard ModWall panels exactly. It slots in as a filler strip between panels or runs as a standalone addition above or beside an existing panel array with no gaps.\u003c\/p\u003e\n\n\u003ch3\u003eWhat stud patterns does this fit?\u003c\/h3\u003e\n\u003cp\u003eIt fits any stud pattern. Multiple attachment points are built into the strip, so it installs on standard 16-inch and 24-inch on-center framing without requiring additional blocking or custom hardware beyond the included mounting hardware.\u003c\/p\u003e\n\n\u003ch3\u003eWhat is the strip made of?\u003c\/h3\u003e\n\u003cp\u003eIt is made from US-sourced HDPE (high-density polyethylene) plastic. HDPE is rigid under load, moisture-resistant, and soft enough on its surface to protect the finish of gear mounted against it.\u003c\/p\u003e\n\n\u003ch3\u003eCan this be mounted on a wall as well as a ceiling?\u003c\/h3\u003e\n\u003cp\u003eYes. The strip is designed for ceiling applications and carries a light grey finish suited to that use, but its multi-attachment-point design also allows wall mounting on any studded surface.\u003c\/p\u003e\n\n\u003ch3\u003eWhat is included in the box?\u003c\/h3\u003e\n\u003cp\u003eThe box includes one Ceiling Panel Strip (48 in x 4 in), mounting hardware, and installation instructions.\u003c\/p\u003e\n\n\u003c\/div\u003e","brand":"Tactical Walls","offers":[{"title":"Default Title","offer_id":67013354783091,"sku":"MWCPANEL","price":45.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1926\/7025\/files\/DSC_3889s-sq.jpg?v=1790728342"},{"product_id":"tactical-walls-modwall-hook-hdpe-modular-wall-hook","title":"Tactical Walls ModWall Hook HDPE Modular Wall Hook","description":"\u003cdiv class=\"rte\"\u003e\n\u003cp\u003eThe Tactical Walls ModWall Hook is a high-density polyethylene modular wall hook that attaches to ModWall panels to keep everyday carry items, gear, and clothing organized and within reach. Designed for the ModWall system, it mounts directly to Nano and Solo panel configurations and can be combined with additional hooks to build a fully custom storage layout. Each hook ships with mounting hardware included.\u003c\/p\u003e\n\n\u003ch2\u003eWho this is for\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eGear-focused households:\u003c\/strong\u003e anyone who wants a dedicated spot for backpacks, hats, coats, and keys near the door or in a garage.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eVehicle and workshop organizers:\u003c\/strong\u003e users building out a ModWall panel in a van, truck bed, or shop wall who need a flexible, rearrangeable hook solution.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eModWall system owners:\u003c\/strong\u003e existing ModWall panel users looking to expand their setup one accessory at a time without committing to a fixed layout.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFeatures and design\u003c\/h2\u003e\n\u003cp\u003eThe ModWall Hook clips into the ModWall panel grid, locking in place without tools beyond the included mounting hardware. Because the hook is part of the modular system, it repositions anywhere along the panel face whenever your storage needs change. Add one hook for a single bag or line up several across the panel to handle a full rack of gear.\u003c\/p\u003e\n\u003cp\u003eThe hook profile is broad enough to catch backpack straps, coat collars, and towel loops without snagging, and low-profile enough to keep the panel face tidy when nothing is hanging from it.\u003c\/p\u003e\n\n\u003ch2\u003eMaterials and construction\u003c\/h2\u003e\n\u003cp\u003eThe hook body is molded from high-density polyethylene (HDPE). HDPE is rigid enough to hold loaded backpacks and layered coats without flexing, and its surface is smooth enough to avoid scuffing fabric or finished gear. Unlike steel hooks, the HDPE construction will not scratch or dent items hung against it.\u003c\/p\u003e\n\u003cp\u003eFor heavier loads such as tools or bulkier equipment, the ModWall Accessory Hooks offer a steel-body alternative sized for the same panel system.\u003c\/p\u003e\n\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cp\u003eThe ModWall Hook attaches exclusively to ModWall panels. It is compatible with Nano and Solo ModWall panel variants. It does not mount to standard pegboard, drywall anchors, or third-party modular wall systems.\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cdiv class=\"quick-answer\"\u003e\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Tactical Walls\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e ModWall Hook\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSKU:\u003c\/strong\u003e mwSPORThook\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e High-density polyethylene (HDPE)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCompatible panels:\u003c\/strong\u003e ModWall Nano, ModWall Solo\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIncluded:\u003c\/strong\u003e 1 hook, mounting hardware\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShipment weight:\u003c\/strong\u003e 0.5 lbs\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShipment dimensions:\u003c\/strong\u003e 5 x 10 in\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/div\u003e\n\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\n\u003ch3\u003eWhat panels does the ModWall Hook work with?\u003c\/h3\u003e\n\u003cp\u003eIt attaches exclusively to ModWall panels, specifically the Nano and Solo variants. It is not compatible with standard pegboard or other modular wall systems.\u003c\/p\u003e\n\n\u003ch3\u003eWhat can I hang on this hook?\u003c\/h3\u003e\n\u003cp\u003eThe hook handles backpacks, coats, bags, hats, keys, towels, and similar everyday items. For heavier loads such as tools or bulky equipment, the ModWall Accessory Hooks offer a steel-body option built for that purpose.\u003c\/p\u003e\n\n\u003ch3\u003eDoes the hook require tools to install or reposition?\u003c\/h3\u003e\n\u003cp\u003eIt ships with mounting hardware. Once the panel is in place, the hook clips into the panel grid and can be repositioned along the panel face as your layout changes.\u003c\/p\u003e\n\n\u003ch3\u003eCan I use multiple hooks on one panel?\u003c\/h3\u003e\n\u003cp\u003eYes. Multiple hooks can be added to a single panel to build a custom storage configuration. The modular design lets you expand or rearrange the layout at any time.\u003c\/p\u003e\n\n\u003ch3\u003eWhat is the hook made of and will it scratch my gear?\u003c\/h3\u003e\n\u003cp\u003eThe hook is molded from high-density polyethylene (HDPE). The smooth HDPE surface will not scratch or scuff fabric, finished gear, or items hung against it, unlike bare steel hooks.\u003c\/p\u003e\n\n\u003ch3\u003eWhat is included in the box?\u003c\/h3\u003e\n\u003cp\u003eEach order includes one ModWall Hook and the mounting hardware needed to attach it to a compatible ModWall panel.\u003c\/p\u003e\n\n\u003c\/div\u003e","brand":"Tactical Walls","offers":[{"title":"Default Title","offer_id":67013354946931,"sku":"mwSPORThook","price":8.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1926\/7025\/files\/DSC_2314s-sq.jpg?v=1790728392"},{"product_id":"tactical-walls-vmod-bronco-tailgate-panel-modwall","title":"Tactical Walls VMod Ford Bronco Tailgate Panel ModWall Vehicle Organizer","description":"\u003cdiv class=\"rte\"\u003e\n\n\u003cp\u003eThe Tactical Walls VMod Ford Bronco Tailgate Panel is a bolt-on modular organization platform purpose-built for the 6th-Generation Ford Bronco (2021–2026). Measuring 14\" x 28\" x 0.5\" and constructed from high-density polyethylene (HDPE), it mounts directly to the tailgate's existing holes with no drilling and no permanent modifications. The panel serves as the foundation for any combination of ModWall accessories, turning unused tailgate space into a structured, trail-ready gear organization system. Included in the box: one tailgate panel, mounting hardware, and instructions.\u003c\/p\u003e\n\n\u003ch2\u003eWho this is for\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOff-road and overland enthusiasts\u003c\/strong\u003e who want a clean, organized tailgate setup for tools, recovery gear, and trail equipment on 6th-Gen Bronco builds.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeekend trail trekkers and daily drivers\u003c\/strong\u003e who need a reversible, no-drill storage solution that protects the vehicle's finish while adding real utility.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eModular gear organizers\u003c\/strong\u003e who want a blank-slate platform they can expand over time with Strap Blocks, Large Shelves, Case Adapters, and other ModWall accessories.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFeatures and design\u003c\/h2\u003e\n\u003cp\u003eThe VMod Bronco Panel gives you 14\" x 28\" of usable tailgate surface at just 0.5\" thick, keeping the profile low while providing a solid mounting foundation. The bolt-on design uses the Bronco's factory holes, so installation is quick and completely reversible. No adhesives, no drilling, no guesswork.\u003c\/p\u003e\n\u003cp\u003eThe panel's ModWall-compatible surface accepts the full range of Tactical Walls VMod and ModWall accessories. Strap Blocks secure straps and cords. The Large Shelf adds a horizontal work or storage surface. Case Adapters let you mount hard cases directly to the tailgate. Mix and match as your needs change from trip to trip.\u003c\/p\u003e\n\n\u003ch2\u003eMaterials and construction\u003c\/h2\u003e\n\u003cp\u003eHDPE (high-density polyethylene) gives the panel its durability without adding unnecessary weight. The material resists moisture, UV exposure, and trail debris, and its surface finish stays gentle on the Bronco's painted tailgate. The panel ships at 6 lbs with shipment dimensions of 35\" x 20\" x 5\".\u003c\/p\u003e\n\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cp\u003eFits the 6th-Generation Ford Bronco, model years 2021, 2022, 2023, 2024, 2025, and 2026. Compatible with all Tactical Walls VMod and ModWall accessories, including Strap Blocks, the Large Shelf, and Case Adapters. Pairs with the VMod Ford Bronco Table for full tailgate coverage.\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cdiv class=\"quick-answer\"\u003e\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Tactical Walls\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e VMod Ford Bronco Tailgate Panel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePanel dimensions:\u003c\/strong\u003e 14\" x 28\" x 0.5\"\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e High-density polyethylene (HDPE)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eVehicle fitment:\u003c\/strong\u003e 6th-Generation Ford Bronco, 2021–2026\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInstallation:\u003c\/strong\u003e Bolt-on, uses existing tailgate holes; no drilling required\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eModWall compatible:\u003c\/strong\u003e Yes — Strap Blocks, Large Shelf, Case Adapters, and all VMod\/ModWall accessories\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIncluded:\u003c\/strong\u003e 1x tailgate panel, mounting hardware, instructions\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShipment weight:\u003c\/strong\u003e 6 lbs\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShipment dimensions:\u003c\/strong\u003e 35\" x 20\" x 5\"\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSKU:\u003c\/strong\u003e VMODBRONCOpanel\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/div\u003e\n\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\n\u003ch3\u003eWhat vehicles does this panel fit?\u003c\/h3\u003e\n\u003cp\u003eThis panel fits the 6th-Generation Ford Bronco only, covering model years 2021 through 2026. It uses the Bronco's factory tailgate holes for mounting, so fitment is precise with no modifications to the vehicle.\u003c\/p\u003e\n\n\u003ch3\u003eDoes installation require drilling or permanent modifications?\u003c\/h3\u003e\n\u003cp\u003eNo. The panel bolts directly onto existing holes in the Bronco's tailgate. No drilling, no adhesives, and no permanent changes to the vehicle. The installation is fully reversible.\u003c\/p\u003e\n\n\u003ch3\u003eWhat accessories are compatible with this panel?\u003c\/h3\u003e\n\u003cp\u003eThe panel works with all Tactical Walls VMod and ModWall accessories. Confirmed compatible accessories include Strap Blocks, the Large Shelf, and Case Adapters. It also pairs with the VMod Ford Bronco Table for expanded tailgate coverage.\u003c\/p\u003e\n\n\u003ch3\u003eWhat is the panel made of?\u003c\/h3\u003e\n\u003cp\u003eThe panel is constructed from high-density polyethylene (HDPE). HDPE resists moisture, UV exposure, and trail debris while remaining gentle on the Bronco's painted finish.\u003c\/p\u003e\n\n\u003ch3\u003eWhat is included in the box?\u003c\/h3\u003e\n\u003cp\u003eThe package includes one VMod Ford Bronco Tailgate Panel, all necessary mounting hardware, and installation instructions.\u003c\/p\u003e\n\n\u003ch3\u003eHow do I expand the setup over time?\u003c\/h3\u003e\n\u003cp\u003eStart with the panel as your base and add ModWall accessories as your needs grow. Strap Blocks, shelves, and case adapters all attach to the same ModWall-compatible surface, so you can reconfigure the layout between trips without tools or permanent changes.\u003c\/p\u003e\n\n\u003c\/div\u003e","brand":"Tactical Walls","offers":[{"title":"Default Title","offer_id":67013355209075,"sku":"VMODBRONCOpanel","price":165.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1926\/7025\/files\/DSC_9775gs-sq.jpg?v=1790728446"},{"product_id":"tactical-walls-modwall-nano-mount","title":"Tactical Walls ModWall Nano Mount Wall Organization Adapter","description":"\u003cdiv class=\"rte\"\u003e\n\n\u003cp\u003eThe Tactical Walls ModWall Nano Mount is a compact, low-profile wall-mount adapter that attaches any ModWall accessory directly to a wall surface without a backplate or panel. Made from US-sourced HDPE plastic, each Nano Mount installs with two drywall screws and two anchors (included per mount) and works in homes, garages, vehicles, and other tight spaces. Available in single, two-pack, and four-pack options to match the accessory count you need.\u003c\/p\u003e\n\n\u003ch2\u003eWho this is for\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTactical gear organizers\u003c\/strong\u003e who want to mount helmets, vests, duty belts, and tactical belt accessories directly to a wall without a bulky panel system.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWorkshop and garage users\u003c\/strong\u003e who need a clean, low-profile solution for hanging tools, flashlights, punch sets, and accessory hooks on drywall.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSpace-constrained installers\u003c\/strong\u003e who need a discreet mount that fits in closets, vehicle interiors, and other areas where a full ModWall panel is impractical.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFeatures and design\u003c\/h2\u003e\n\u003cp\u003eThe Nano Mount eliminates the need for a ModWall panel by providing a direct-to-wall attachment point for any ModWall accessory. Its low-profile footprint keeps gear close to the wall surface, reducing visual clutter and making it suitable for tight or concealed spaces. Each mount accepts the same accessory interface as a standard ModWall panel, so every accessory in the ModWall ecosystem connects without modification.\u003c\/p\u003e\n\u003cp\u003eThe mount ships with two drywall screws and two drywall screw anchors per unit, along with printed instructions. No additional hardware is required for standard drywall installation.\u003c\/p\u003e\n\n\u003ch2\u003eMaterials and construction\u003c\/h2\u003e\n\u003cp\u003eEach Nano Mount is molded from US-sourced HDPE (high-density polyethylene) plastic. HDPE offers high impact resistance and resists moisture, making it suitable for garage, vehicle, and indoor storage environments. The material supports long-term storage loads as well as repeated daily access cycles without deforming at the mount points.\u003c\/p\u003e\n\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cp\u003eThe Nano Mount works with all ModWall accessories. The number of Nano Mounts required varies by accessory. Use the reference below to determine the correct quantity before ordering.\u003c\/p\u003e\n\n\u003ch3\u003eMounts required per accessory type\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n\u003cth\u003eMounts needed\u003c\/th\u003e\n\u003cth\u003eCompatible accessories\u003c\/th\u003e\n\u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003e1 Nano\u003c\/td\u003e\n\u003ctd\u003eTactical Belt Mount, Flashlight Holder, Punch Set Holder, Accessory Hooks, and similar single-point accessories\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e2 Nanos\u003c\/td\u003e\n\u003ctd\u003eHelmet Hanger, Vest Hanger, Large Shelf, Small Flat Shelf, Duty Belt Holder, Strap Block, and similar two-point accessories\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e3 Nanos\u003c\/td\u003e\n\u003ctd\u003eX-Large Flat Shelf\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e4 Nanos\u003c\/td\u003e\n\u003ctd\u003ePaired accessory combinations; bulk purchases\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cp\u003eAccessories are sold separately. Only the Nano Mounts and included hardware are in the box.\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cdiv class=\"quick-answer\"\u003e\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Tactical Walls\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e ModWall Nano Mount\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e US-sourced HDPE plastic\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePackage options:\u003c\/strong\u003e 1 Nano (SKU MWNANO1), 2 Nanos (SKU MWNANO2), 4 Nanos (SKU MWNANO4)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIncluded per mount:\u003c\/strong\u003e 1 Nano Mount, 2 drywall screws, 2 drywall screw anchors, instructions\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShipment weight:\u003c\/strong\u003e 1 lb\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShipment dimensions:\u003c\/strong\u003e 5 x 1 x 3 in\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBackplate or panel required:\u003c\/strong\u003e No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eModWall panel required:\u003c\/strong\u003e No\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/div\u003e\n\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\n\u003ch3\u003eWhat is included in the box?\u003c\/h3\u003e\n\u003cp\u003eEach order includes the selected quantity of Nano Mounts, two drywall screws per mount, two drywall screw anchors per mount, and printed instructions. ModWall accessories such as shelves, hangers, and hooks are sold separately.\u003c\/p\u003e\n\n\u003ch3\u003eDo I need a ModWall panel to use the Nano Mount?\u003c\/h3\u003e\n\u003cp\u003eNo. The Nano Mount is specifically designed to attach ModWall accessories directly to a wall surface, eliminating the need for a backplate or panel. It is the panel-free alternative in the ModWall system.\u003c\/p\u003e\n\n\u003ch3\u003eHow many Nano Mounts do I need?\u003c\/h3\u003e\n\u003cp\u003eIt depends on the accessory. Single-point accessories such as the Tactical Belt Mount, Flashlight Holder, and Accessory Hooks require one Nano. Two-point accessories such as the Helmet Hanger, Vest Hanger, and shelves require two. The X-Large Flat Shelf requires three. Paired accessory combinations are covered by the four-pack.\u003c\/p\u003e\n\n\u003ch3\u003eWhat surfaces can the Nano Mount be installed on?\u003c\/h3\u003e\n\u003cp\u003eThe included hardware consists of drywall screws and drywall anchors, so the mount is designed for standard drywall installation. For other surface types, contact us before ordering to confirm hardware compatibility.\u003c\/p\u003e\n\n\u003ch3\u003eWhat is the Nano Mount made of?\u003c\/h3\u003e\n\u003cp\u003eEach Nano Mount is molded from US-sourced HDPE plastic. HDPE is impact-resistant and moisture-resistant, making it suitable for garage, vehicle, and indoor storage environments.\u003c\/p\u003e\n\n\u003ch3\u003eCan I use the Nano Mount in a vehicle?\u003c\/h3\u003e\n\u003cp\u003eYes. The low-profile design and compact footprint make the Nano Mount suitable for vehicle installations in addition to home and garage walls. Confirm that your vehicle surface accepts the included drywall-style hardware, or contact us for guidance on alternative mounting options.\u003c\/p\u003e\n\n\u003c\/div\u003e","brand":"Tactical Walls","offers":[{"title":"one-nano","offer_id":67013355929971,"sku":"MWNANO1","price":10.99,"currency_code":"USD","in_stock":true},{"title":"two-nanos","offer_id":67013355962739,"sku":"MWNANO2","price":19.99,"currency_code":"USD","in_stock":true},{"title":"four-nanos","offer_id":67013355995507,"sku":"MWNANO4","price":34.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1926\/7025\/files\/DSC_8219s-sq.jpg?v=1790728510"},{"product_id":"tactical-walls-modwall-accessory-hooks-steel-wall-organizer","title":"Tactical Walls ModWall Accessory Hooks Heavy Duty Steel Wall Organizer","description":"\u003cdiv class=\"rte\"\u003e\n\n\u003cp\u003eThe Tactical Walls ModWall Accessory Hook is a 1\/4-inch-thick powder-coated steel hook designed to mount directly into ModWall panels, keeping tools, sporting gear, tactical equipment, and utility items organized and within reach. Each hook slides into ModWall-specific panel grooves for a secure, integrated fit. Three length options — 4-inch, 6-inch, and 8-inch — let you match the hook to the item you're hanging, from compact hand tools to bulkier utility equipment.\u003c\/p\u003e\n\n\u003ch2\u003eWho this is for\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWorkshop and garage organizers\u003c\/strong\u003e who want a modular, heavy-duty solution for hanging power tools and utility gear on a wall panel system.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTactical gear users\u003c\/strong\u003e who store helmets, vests, belts, and load-bearing equipment on a ModWall panel and need hooks sized to the job.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSporting and outdoor enthusiasts\u003c\/strong\u003e looking to keep cycling gear, climbing equipment, or other activity-specific items accessible and off the floor.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFeatures and design\u003c\/h2\u003e\n\u003cp\u003eEach hook is cut from 1\/4-inch steel and finished with a powder-coat that resists chipping and corrosion over repeated use. The profile is purpose-built for ModWall panels: a precision-fit base slides into the panel's proprietary grooves and locks in place with the included mounting hardware, eliminating wobble under load. Because the hooks are sold individually by length, you can build out a mixed configuration across a single panel, pairing 4-inch hooks for smaller items alongside 8-inch hooks for heavier or bulkier gear.\u003c\/p\u003e\n\u003cp\u003eThe 4-inch length suits compact items such as hand tools, carabiners, or straps. The 6-inch length handles mid-size gear including power tool bodies and medium pouches. The 8-inch length accommodates larger or heavier utility equipment where additional reach off the panel face is needed.\u003c\/p\u003e\n\n\u003ch2\u003eMaterials and construction\u003c\/h2\u003e\n\u003cp\u003eThe hook body is 1\/4-inch-thick powder-coated steel throughout. Steel at this gauge handles substantial hanging loads without flexing, making it suitable for heavier tools and equipment rather than lightweight pegboard alternatives. The powder-coat finish bonds directly to the steel surface, providing a durable layer that holds up in garage, workshop, and storage environments.\u003c\/p\u003e\n\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cp\u003eThese hooks slide exclusively into Tactical Walls ModWall panels using the ModWall-specific groove system. They are not compatible with standard pegboard, slatwall, or third-party modular panel systems. If you are building out a ModWall panel setup, these hooks integrate with the full ModWall accessory ecosystem, including other ModWall Project collection components.\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cdiv class=\"quick-answer\"\u003e\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Tactical Walls\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e ModWall Accessory Hook\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAvailable lengths:\u003c\/strong\u003e 4 in, 6 in, 8 in\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e 1\/4-in-thick powder-coated steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePanel compatibility:\u003c\/strong\u003e Tactical Walls ModWall panels (ModWall-specific groove system)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShipment weight:\u003c\/strong\u003e 0.1 lbs\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShipment dimensions:\u003c\/strong\u003e 8 x 1 x 3 in\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIncluded:\u003c\/strong\u003e 1 x Accessory Hook (choice of 4 in, 6 in, or 8 in), mounting hardware\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/div\u003e\n\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\n\u003ch3\u003eWhat ModWall panels are these hooks compatible with?\u003c\/h3\u003e\n\u003cp\u003eThese hooks slide exclusively into Tactical Walls ModWall panels using the ModWall-specific groove system. They are not designed for standard pegboard, slatwall, or other modular wall systems. If you are unsure whether your existing panel is compatible, contact us before ordering.\u003c\/p\u003e\n\n\u003ch3\u003eWhich length should I choose?\u003c\/h3\u003e\n\u003cp\u003eIt depends on what you plan to hang. The 4-inch hook works well for compact items such as hand tools, carabiners, and straps. The 6-inch hook suits mid-size gear including power tool bodies. The 8-inch hook gives additional reach for larger or heavier utility equipment. Mixing lengths across a single panel lets you tailor the layout to your gear.\u003c\/p\u003e\n\n\u003ch3\u003eHow many hooks come in each order?\u003c\/h3\u003e\n\u003cp\u003eEach order includes one Accessory Hook in your chosen length, plus the mounting hardware needed to secure it to a ModWall panel. If you need multiple hooks, add each length as a separate line item.\u003c\/p\u003e\n\n\u003ch3\u003eWhat is the hook made of?\u003c\/h3\u003e\n\u003cp\u003eEach hook is 1\/4-inch-thick powder-coated steel. The powder-coat finish resists chipping and corrosion, and the steel gauge is suited to hanging heavy tools and utility equipment without flexing under load.\u003c\/p\u003e\n\n\u003ch3\u003eCan I use these hooks without a ModWall panel?\u003c\/h3\u003e\n\u003cp\u003eNo. These hooks are engineered specifically for the ModWall groove system and require a compatible ModWall panel to mount correctly. They will not function as standalone wall hooks or fit standard pegboard and slatwall systems.\u003c\/p\u003e\n\n\u003c\/div\u003e","brand":"Tactical Walls","offers":[{"title":"4","offer_id":67013356126579,"sku":"MWACCHK4","price":12.99,"currency_code":"USD","in_stock":true},{"title":"6-inches","offer_id":67013356159347,"sku":"MWACCHK6","price":12.99,"currency_code":"USD","in_stock":true},{"title":"8-inches","offer_id":67013356192115,"sku":"MWACCHK8","price":12.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1926\/7025\/files\/DSC_6812s-sq.jpg?v=1790728572"},{"product_id":"tactical-walls-vmod-toyota-fj-tailgate-organizer","title":"Tactical Walls VMod Toyota FJ Cruiser Tailgate ModWall Organizer Package","description":"\u003cdiv class=\"rte\"\u003e\n\u003cp\u003eThe Tactical Walls VMod Toyota FJ Package is a vehicle tailgate organization system designed to mount directly onto the existing tailgate space of most Toyota FJ Cruiser models. Built from non-abrasive HDPE plastic, the package ships fully assembled and ready to install in minutes. The kit includes one 12\" x 40.375\" x 0.5\" ModWall panel, two 4x4 ModWall Strap Blocks, three ModWall Hangers, one ModWall Large Shelf, one ModWall Hide-A-Mag, and mounting hardware. Available in one configuration sized for the FJ Cruiser tailgate.\u003c\/p\u003e\n\n\u003ch2\u003eWho this is for\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverlanders and 4x4 enthusiasts\u003c\/strong\u003e who need fast access to tools and trail gear without digging through cargo.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOutdoor workers and tradespeople\u003c\/strong\u003e who carry power tools, straps, and job-site essentials in their FJ Cruiser and want them organized and protected.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeekend adventurers\u003c\/strong\u003e who want a clean, modular tailgate setup that keeps gear secure and surfaces scratch-free.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFeatures and design\u003c\/h2\u003e\n\u003cp\u003eThe VMod system mounts to the FJ Cruiser's tailgate interior using the existing space, with no permanent modifications required. The panel measures 12\" x 40.375\" x 0.5\" and provides a flat mounting surface for the included accessories. Three ModWall Hangers attach directly to the panel and hold tools, straps, or other gear. The ModWall Large Shelf adds a horizontal storage surface for bulkier items. The 4x4 Strap Blocks secure straps, bungees, or similar flexible gear. All components arrive pre-assembled, so installation requires only the included mounting hardware and the provided instructions.\u003c\/p\u003e\n\u003cp\u003eThe modular design means accessories can be repositioned on the panel as your kit changes. The system works across a range of FJ Cruiser model years; verify your tailgate measurements before ordering to confirm fit.\u003c\/p\u003e\n\n\u003ch2\u003eMaterials and construction\u003c\/h2\u003e\n\u003cp\u003eEvery component is made from HDPE plastic. The material is rigid enough to hold loaded gear securely while remaining non-abrasive against surfaces it contacts, protecting interior finishes and the gear itself. The VMod package is manufactured in the United States.\u003c\/p\u003e\n\n\u003ch2\u003eIntended use\u003c\/h2\u003e\n\u003cp\u003eThe VMod Toyota FJ Package is purpose-built for tailgate organization on the Toyota FJ Cruiser. It suits trail days, job-site runs, camping trips, and any application where quick access to organized gear matters. The panel and accessories keep tools, recovery straps, and day-trip essentials visible and within reach the moment the tailgate opens.\u003c\/p\u003e\n\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cp\u003eFits most Toyota FJ Cruiser models. Verify your tailgate's interior dimensions against the panel size (12\" x 40.375\" x 0.5\") before ordering to confirm proper fit. Tactical Walls also offers VMod packages for Ford Bronco and Jeep platforms if you run a different vehicle.\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cdiv class=\"quick-answer\"\u003e\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Tactical Walls\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e VMod Toyota FJ Package (SKU: VMODFJ)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePanel dimensions:\u003c\/strong\u003e 12\" x 40.375\" x 0.5\"\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e HDPE plastic (non-abrasive)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCountry of manufacture:\u003c\/strong\u003e USA\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShipment weight:\u003c\/strong\u003e 10 lbs\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShipment dimensions:\u003c\/strong\u003e 35 x 20 x 5 in\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIncluded:\u003c\/strong\u003e (1) ModWall Panel, (2) 4x4 ModWall Strap Blocks, (3) ModWall Hangers, (1) ModWall Large Shelf, (1) ModWall Hide-A-Mag, mounting hardware, instructions\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAssembly required:\u003c\/strong\u003e No — all accessories arrive pre-assembled\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eVehicle fit:\u003c\/strong\u003e Most Toyota FJ Cruiser models (verify measurements)\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/div\u003e\n\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\n\u003ch3\u003eWhat vehicles does this package fit?\u003c\/h3\u003e\n\u003cp\u003eIt fits most Toyota FJ Cruiser models. Because tailgate dimensions can vary slightly across model years, verify your interior tailgate measurements against the panel size (12\" x 40.375\" x 0.5\") before ordering to confirm a proper fit.\u003c\/p\u003e\n\n\u003ch3\u003eDoes this require drilling or permanent modifications?\u003c\/h3\u003e\n\u003cp\u003eNo permanent modifications are required. The panel mounts to the existing tailgate space using the included mounting hardware. Installation takes only a few minutes and does not alter the vehicle's structure.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's included in the box?\u003c\/h3\u003e\n\u003cp\u003eThe package includes one ModWall Panel (12\" x 40.375\" x 0.5\"), two 4x4 ModWall Strap Blocks, three ModWall Hangers, one ModWall Large Shelf, one ModWall Hide-A-Mag, mounting hardware, and instructions. All accessories arrive pre-assembled and ready to install.\u003c\/p\u003e\n\n\u003ch3\u003eWhat is the panel made of?\u003c\/h3\u003e\n\u003cp\u003eThe panel and all accessories are made from HDPE plastic. It is rigid enough to hold gear securely and non-abrasive so it will not scratch interior surfaces or the items stored on it. The package is manufactured in the United States.\u003c\/p\u003e\n\n\u003ch3\u003eCan I reconfigure the accessories on the panel?\u003c\/h3\u003e\n\u003cp\u003eYes. The ModWall system is modular, so hangers, shelf, and strap blocks can be repositioned on the panel to suit different gear layouts. Additional ModWall accessories sold separately can also be added to the panel as your needs change.\u003c\/p\u003e\n\n\u003ch3\u003eWhat types of gear can this hold?\u003c\/h3\u003e\n\u003cp\u003eThe hangers and strap blocks are suited for tools, recovery straps, bungee cords, and similar trail or job-site gear. The large shelf handles bulkier items. The system is designed for tools, sporting gear, and outdoor essentials rather than any specific item category.\u003c\/p\u003e\n\n\u003c\/div\u003e","brand":"Tactical Walls","offers":[{"title":"Default Title","offer_id":67013356421491,"sku":"VMODFJ","price":289.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1926\/7025\/files\/FJ-MODWALL-WEB-002-sq.jpg?v=1790728634"},{"product_id":"tactical-walls-midmod-modular-hdpe-slotted-wall-panel","title":"Tactical Walls MidMod Modular HDPE Slotted Wall Panel 36x6","description":"\u003cdiv class=\"rte\"\u003e\n\n\u003cp\u003eThe Tactical Walls MidMod Panel is a compact modular slotted wall panel measuring 36\" x 6\" x 0.5\", built from US-sourced HDPE plastic for lasting durability. Designed for apartments and rooms with limited wall space, it accepts every ModWall accessory and mounts to walls or ceilings, giving you a flexible organization surface for helmets, vests, belts, tools, sporting gear, and vehicle equipment. Mount panels side by side for a continuous organizer board, or cut the HDPE to fit any specific area.\u003c\/p\u003e\n\n\u003ch2\u003eWho this is for\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eApartment and small-space dwellers\u003c\/strong\u003e who need a wall-mounted gear organizer that fits in tight rooms without consuming significant wall real estate.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTactical and sporting enthusiasts\u003c\/strong\u003e who want a modular, expandable system to display and access helmets, vests, belts, and sporting equipment at a glance.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWorkshop and garage organizers\u003c\/strong\u003e who need a cuttable, ceiling- or wall-mountable panel that adapts to irregular stud patterns and unconventional mounting surfaces.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFeatures and design\u003c\/h2\u003e\n\u003cp\u003eAt 36\" x 6\", the MidMod Panel slots into spaces where full-size panels cannot. The slotted profile accepts the complete range of ModWall accessories, so you can configure hooks, mounts, and holders exactly where you need them. Two specialized screw trenches run the length of the panel, accommodating any wall stud pattern or offset without requiring precise stud alignment. That flexibility makes installation straightforward whether you're mounting on standard 16\" centers, 24\" centers, or an irregular layout.\u003c\/p\u003e\n\n\u003cp\u003eThe panel works equally well on ceilings, opening up overhead storage for gear that would otherwise consume floor or shelf space. Mount several panels side by side and the slots align continuously, turning a row of MidMod Panels into a single expandable organizer board of any length you need.\u003c\/p\u003e\n\n\u003ch2\u003eMaterials and construction\u003c\/h2\u003e\n\u003cp\u003eThe MidMod Panel is made from US-sourced HDPE (high-density polyethylene) plastic. HDPE resists moisture, UV exposure, and natural degradation, so the panel holds up in garages, basements, and other environments where humidity or temperature swings would degrade lesser materials. The 0.5\" thickness gives the panel enough rigidity to support gear loads while keeping the overall profile shallow against the wall. Because HDPE cuts cleanly with standard woodworking tools, you can trim the panel to fit any specific area without specialized equipment.\u003c\/p\u003e\n\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cp\u003eThe MidMod Panel is fully compatible with every ModWall accessory and mount in the Tactical Walls lineup. Accessories attach via the slotted panel system, so you can reposition or swap them without tools or wall damage. Panels can be combined with other ModWall panel sizes to build a larger, continuous organization surface.\u003c\/p\u003e\n\n\u003ch2\u003eCare and maintenance\u003c\/h2\u003e\n\u003cp\u003eHDPE requires no sealing, painting, or periodic treatment. Wipe the panel down with a damp cloth to remove dust and debris. The material does not absorb moisture, so there is no risk of warping or swelling over time.\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cdiv class=\"quick-answer\"\u003e\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Tactical Walls\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e MidMod Panel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 36\" x 6\" x 0.5\"\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e US-sourced HDPE plastic\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMounting surfaces:\u003c\/strong\u003e Wall and ceiling\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInstallation:\u003c\/strong\u003e Two screw trenches; accommodates any stud pattern or offset\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCompatibility:\u003c\/strong\u003e All ModWall accessories and mounts\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCustomizable:\u003c\/strong\u003e Cuttable to fit any specific area\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIncluded:\u003c\/strong\u003e 1 x Modular Slotted Panel (36\" x 6\"), instructions\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSKU:\u003c\/strong\u003e mwSPORTpanel\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/div\u003e\n\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\n\u003ch3\u003eWhat ModWall accessories work with the MidMod Panel?\u003c\/h3\u003e\n\u003cp\u003eEvery ModWall accessory and mount in the Tactical Walls lineup is compatible with the MidMod Panel. The slotted panel system is universal across the ModWall range, so any hook, holder, or mount you add later will fit without modification.\u003c\/p\u003e\n\n\u003ch3\u003eCan I mount this panel on a ceiling?\u003c\/h3\u003e\n\u003cp\u003eYes. The MidMod Panel is designed for both wall and ceiling applications. The two screw trenches accommodate various mounting orientations and stud patterns, making overhead installation as straightforward as a standard wall mount.\u003c\/p\u003e\n\n\u003ch3\u003eCan I cut the panel to a custom size?\u003c\/h3\u003e\n\u003cp\u003eYes. The HDPE material cuts cleanly with standard woodworking tools, so you can trim the panel to fit any specific area. Cutting does not affect the slot pattern along the trimmed portion.\u003c\/p\u003e\n\n\u003ch3\u003eHow do I expand the system if I need more space?\u003c\/h3\u003e\n\u003cp\u003eMount additional MidMod Panels side by side. The slots align continuously across panels, creating a single expandable organizer board of any length. You can mix MidMod Panels with other ModWall panel sizes to fill a larger wall area.\u003c\/p\u003e\n\n\u003ch3\u003eWhat is the panel made of, and will it hold up outdoors or in a garage?\u003c\/h3\u003e\n\u003cp\u003eThe panel is made from US-sourced HDPE plastic, which resists moisture, UV exposure, and natural degradation. It is well suited for garages, basements, and other environments with humidity or temperature variation. It is not rated for fully exposed outdoor use, but covered outdoor spaces such as a carport or enclosed porch are reasonable applications.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's included in the box?\u003c\/h3\u003e\n\u003cp\u003eThe package includes one Modular Slotted Panel measuring 36\" x 6\" and an instruction sheet. Mounting hardware and ModWall accessories are sold separately.\u003c\/p\u003e\n\n\u003c\/div\u003e","brand":"Tactical Walls","offers":[{"title":"Default Title","offer_id":67013356650867,"sku":"mwSPORTpanel","price":60.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1926\/7025\/files\/MidMOD-V2-scaled-sq.jpg?v=1790728692"},{"product_id":"tactical-walls-modwall-large-shelf","title":"Tactical Walls ModWall Large Shelf for Tactical Gear Organization","description":"\u003cdiv class=\"rte\"\u003e\n\u003cp\u003eThe Tactical Walls ModWall Large Shelf is a 14-inch-wide, HDPE wall-mount shelf designed to clip directly onto any ModWall panel without additional hardware. At 3.5 inches of outer-wall depth, it holds cleaning kits, lights, knives, helmets, belts, and other tactical accessories side by side in a single organized row. Dimensions are 14\" x 4\" x 2.75\" and the shipment weight is 2 lbs. Available in one configuration, it ships with mounting hardware and instructions included.\u003c\/p\u003e\n\n\u003ch2\u003eWho this is for\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTactical gear owners\u003c\/strong\u003e who want a dedicated wall-mounted shelf for helmets, vests, belts, and kit accessories within an existing ModWall panel setup.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWorkshop and garage organizers\u003c\/strong\u003e who need a sturdy, depth-forward shelf to store tools, cleaning kits, and sporting equipment in a clean side-by-side layout.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eVehicle and outdoor preppers\u003c\/strong\u003e who use ModWall panels in trailers or cargo areas and need a shelf with enough depth to secure bulkier gear during transport.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFeatures and design\u003c\/h2\u003e\n\u003cp\u003eThe Large Shelf's 3.5-inch outer-wall depth is the defining feature that separates it from the lower-profile ModWall Flat Shelves. That extra depth lets you stand taller items upright or stack smaller accessories without crowding. The 14-inch width accommodates multiple items in a single row, keeping frequently used gear visible and within reach rather than buried in a bag or bin.\u003c\/p\u003e\n\u003cp\u003eAttachment is tool-free once a ModWall panel is in place. The shelf clips directly into the panel's integrated slot system, creating a stable fit with no screws, anchors, or additional hardware required beyond what is included in the box.\u003c\/p\u003e\n\n\u003ch2\u003eMaterials and construction\u003c\/h2\u003e\n\u003cp\u003eThe shelf body is molded from high-density polyethylene (HDPE). HDPE resists impact, moisture, and common solvents, making it a practical choice for garage, workshop, and vehicle environments where gear gets used hard. The construction is rigid enough to support heavy kit without flex or sag.\u003c\/p\u003e\n\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cp\u003eThe ModWall Large Shelf attaches exclusively to Tactical Walls ModWall panels. It is not compatible with third-party pegboard, slat-wall, or other modular panel systems. If your setup uses ModWall panels, no additional mounting hardware is needed; the shelf integrates directly into the panel's slot pattern. For a lower-profile alternative on the same panels, the ModWall Flat Shelves offer a shallower depth option.\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cdiv class=\"quick-answer\"\u003e\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Tactical Walls\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e ModWall Large Shelf\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 14\" x 4\" x 2.75\"\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOuter wall depth:\u003c\/strong\u003e 3.5 in\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWidth:\u003c\/strong\u003e 14 in\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e High-density polyethylene (HDPE)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShipment weight:\u003c\/strong\u003e 2 lbs\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePanel compatibility:\u003c\/strong\u003e ModWall panels only\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHardware required:\u003c\/strong\u003e None beyond included hardware\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIncluded:\u003c\/strong\u003e 1x Large Shelf, mounting hardware, instructions\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSKU:\u003c\/strong\u003e MWLGSHELF\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/div\u003e\n\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\n\u003ch3\u003eWhat ModWall panels does this shelf work with?\u003c\/h3\u003e\n\u003cp\u003eThe ModWall Large Shelf attaches exclusively to Tactical Walls ModWall panels. It is not designed to fit third-party pegboard or slat-wall systems. If you already have ModWall panels installed, the shelf clips in directly with no additional hardware beyond what is included in the box.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's included in the box?\u003c\/h3\u003e\n\u003cp\u003eThe box includes one Large Shelf (14\" x 4\" x 2.75\"), mounting hardware, and instructions. No separate hardware purchase is needed to mount it on a compatible ModWall panel.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the Large Shelf differ from the ModWall Flat Shelves?\u003c\/h3\u003e\n\u003cp\u003eThe Large Shelf has a 3.5-inch outer-wall depth, giving it significantly more vertical clearance for taller or bulkier items. The ModWall Flat Shelves offer a lower-profile alternative on the same panel system for gear that doesn't need as much depth.\u003c\/p\u003e\n\n\u003ch3\u003eWhat kinds of gear fit on this shelf?\u003c\/h3\u003e\n\u003cp\u003eThe shelf is sized for cleaning kits, lights, knives, and similarly sized tactical accessories. At 14 inches wide and 3.5 inches deep, it can hold multiple items side by side. Heavier or oversized items should be assessed against the shelf's HDPE construction and the load capacity of the ModWall panel itself.\u003c\/p\u003e\n\n\u003ch3\u003eCan this shelf be used in a vehicle or trailer?\u003c\/h3\u003e\n\u003cp\u003eIt depends on the installation. The shelf clips into ModWall panels, so any vehicle or trailer setup that already uses ModWall panels can accept this shelf. Confirm that your panel mounting is rated for the load and vibration conditions of your specific vehicle application before use.\u003c\/p\u003e\n\n\u003c\/div\u003e","brand":"Tactical Walls","offers":[{"title":"Default Title","offer_id":67013356814707,"sku":"MWLGSHELF","price":79.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1926\/7025\/files\/DSC_1251s-scaled-sq.jpg?v=1790728743"},{"product_id":"tactical-walls-vmod-bronco-tailgate-table","title":"Tactical Walls VMod Bronco Tailgate Table for 6th-Gen Ford Bronco","description":"\u003cdiv class=\"rte\"\u003e\n\n\u003cp\u003eThe Tactical Walls VMod Bronco Table is a foldable HDPE workspace that mounts to the VMod Bronco Tailgate Panel in seconds, giving 6th-Gen Ford Bronco owners (2021–2026) a sturdy, tool-free surface for meal prep, map reading, and gear staging at the tailgate. Deployed dimensions are 26.5\" x 14.75\" x 6.75\"; folded, it collapses to a slim 26.5\" x 1.5\" x 6.75\" profile that stores flat in the cargo area. Two cord hangers are included to reinforce load strength and keep the table locked against the panel when stowed.\u003c\/p\u003e\n\n\u003ch2\u003eWho this is for\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverlanders and trail drivers\u003c\/strong\u003e who need a quick-deploy work surface at the tailgate without hauling a separate camp table.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOutdoor enthusiasts\u003c\/strong\u003e who use their Bronco as a basecamp and want organized, accessible gear staging between runs.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDay-trippers and weekend campers\u003c\/strong\u003e who want a compact, no-tools solution that disappears when the adventure is over.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFeatures and design\u003c\/h2\u003e\n\u003cp\u003eThe VMod Bronco Table deploys and folds away in seconds with no tools required. The foldable design means you get a functional workspace on demand without sacrificing cargo room when the table is not in use. Two included cord hangers serve a dual purpose: they add extra load strength when the table is open and secure it flat against the Tailgate Panel when closed, so it does not rattle or shift on the trail.\u003c\/p\u003e\n\u003cp\u003eInstallation is direct and straightforward. The table mounts to the VMod Bronco Tailgate Panel (sold separately) using the included mounting hardware, and the no-tools attachment means setup takes seconds rather than minutes. The slim folded profile, 1.5\" deep, keeps the cargo area clear for everything else you are carrying.\u003c\/p\u003e\n\n\u003ch2\u003eMaterials and construction\u003c\/h2\u003e\n\u003cp\u003eThe table is built from high-density polyethylene (HDPE), a material chosen for its durability and resistance to impact, moisture, and UV exposure. HDPE holds up to the demands of trail use while remaining gentle on vehicle surfaces, so the tailgate finish stays protected. The construction is rigid enough to serve as a working surface for gear staging and food prep without flex under load.\u003c\/p\u003e\n\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cp\u003eThe VMod Bronco Table is designed exclusively for the 6th-Generation Ford Bronco, covering model years 2021, 2022, 2023, 2024, 2025, and 2026. It requires the VMod Bronco Tailgate Panel to install; that panel is sold separately. Confirm you have the Tailgate Panel in place before ordering this table.\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cdiv class=\"quick-answer\"\u003e\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Tactical Walls\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e VMod Bronco Table\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSKU:\u003c\/strong\u003e VMODBRONCOtable\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e High-density polyethylene (HDPE)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDeployed dimensions:\u003c\/strong\u003e 26.5\" x 14.75\" x 6.75\"\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFolded dimensions:\u003c\/strong\u003e 26.5\" x 1.5\" x 6.75\"\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eVehicle compatibility:\u003c\/strong\u003e 6th-Gen Ford Bronco (2021–2026)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRequired accessory:\u003c\/strong\u003e VMod Bronco Tailgate Panel (sold separately)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIncluded:\u003c\/strong\u003e 1x Bronco Tailgate Table, 2x Cord Hangers, Mounting Hardware, Instructions\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTools required for installation:\u003c\/strong\u003e None\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/div\u003e\n\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\n\u003ch3\u003eDoes this table work with any Ford Bronco, or only specific years?\u003c\/h3\u003e\n\u003cp\u003eIt fits the 6th-Generation Ford Bronco only, covering model years 2021 through 2026. It is not designed for earlier Bronco generations or other Ford vehicles.\u003c\/p\u003e\n\n\u003ch3\u003eDo I need the VMod Bronco Tailgate Panel to use this table?\u003c\/h3\u003e\n\u003cp\u003eYes. The VMod Bronco Table mounts directly to the VMod Bronco Tailgate Panel, which is sold separately. The table cannot be installed without that panel in place first.\u003c\/p\u003e\n\n\u003ch3\u003eWhat tools do I need to install it?\u003c\/h3\u003e\n\u003cp\u003eNo tools are required. The table mounts to the Tailgate Panel using the included mounting hardware and attaches in seconds. Mounting hardware and instructions are included in the box.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the table stay secure when it is not in use?\u003c\/h3\u003e\n\u003cp\u003eThe two included cord hangers keep the table folded flat against the Tailgate Panel when stowed, preventing movement or rattling while driving on the trail.\u003c\/p\u003e\n\n\u003ch3\u003eWhat is the table made of, and will it scratch my vehicle?\u003c\/h3\u003e\n\u003cp\u003eThe table is constructed from high-density polyethylene (HDPE), which is impact-resistant and durable while remaining gentle on vehicle surfaces. It is designed to hold gear without damaging the tailgate finish.\u003c\/p\u003e\n\n\u003ch3\u003eWhat is included in the box?\u003c\/h3\u003e\n\u003cp\u003eThe package includes one Bronco Tailgate Table, two cord hangers, mounting hardware, and instructions. The VMod Bronco Tailgate Panel is not included and must be purchased separately.\u003c\/p\u003e\n\n\u003c\/div\u003e","brand":"Tactical Walls","offers":[{"title":"Default Title","offer_id":67013357011315,"sku":"VMODBRONCOtable","price":125.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1926\/7025\/files\/DSC_9830gs-sq.jpg?v=1790728793"},{"product_id":"tactical-walls-modwall-vest-hanger-hdpe-wall-accessory","title":"Tactical Walls ModWall Vest Hanger HDPE Wall Organizer Accessory","description":"\u003cdiv class=\"rte\"\u003e\n\n\u003cp\u003eThe Tactical Walls ModWall Vest Hanger is a contoured HDPE hanger designed to mount directly to a ModWall panel and keep a tactical vest, plate carrier, backpack, or jacket stored upright and within reach. Its two-arm shoulder cradle holds gear in its natural shape, preventing creasing and deformation during storage. No additional hardware is required for installation on a compatible ModWall panel. Shipped with one vest hanger and instructions.\u003c\/p\u003e\n\n\u003ch2\u003eWho this is for\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTactical gear owners\u003c\/strong\u003e who want a dedicated, shape-preserving storage solution for a plate carrier or tactical vest on a modular wall system.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOutdoor and sporting enthusiasts\u003c\/strong\u003e who need an organized, accessible spot for backpacks or jackets in a garage, mudroom, or gear locker.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eModWall panel users\u003c\/strong\u003e looking to expand their existing setup with a purpose-built hanger that installs without tools or extra hardware.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFeatures and design\u003c\/h2\u003e\n\u003cp\u003eThe vest hanger's contoured two-arm profile cradles gear at the shoulder points, distributing weight evenly and maintaining the item's original shape over time. This matters for plate carriers and tactical vests, where shoulder padding and MOLLE webbing can deform under a standard single-hook hang. The two-arm spread keeps the vest open and accessible, so donning it quickly is straightforward.\u003c\/p\u003e\n\u003cp\u003eBeyond vests, the hanger accommodates backpacks and jackets, making it a versatile single-slot solution on the ModWall panel grid. The ModWall Helmet Hanger pairs with this unit to build out a more complete gear station on the same panel.\u003c\/p\u003e\n\n\u003ch2\u003eMaterials and construction\u003c\/h2\u003e\n\u003cp\u003eThe hanger body is HDPE (high-density polyethylene), a material chosen for its strength-to-weight ratio and resistance to cracking under sustained load. HDPE holds up to the weight of a loaded plate carrier without flexing or fatiguing over time. The construction requires no metal fasteners at the hanger-to-panel interface, relying instead on the ModWall panel's integrated mounting geometry.\u003c\/p\u003e\n\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cp\u003eThe ModWall Vest Hanger is exclusively compatible with Tactical Walls ModWall panels. It attaches directly to the panel without additional hardware. It does not include a direct-to-wall adapter; users who need a combined vest and helmet storage solution with a standalone wall adapter should consider the Heavy Gear Hanger instead.\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cdiv class=\"quick-answer\"\u003e\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Tactical Walls\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e ModWall Vest Hanger\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSKU:\u003c\/strong\u003e MWVEST\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e HDPE (high-density polyethylene)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCompatible mounting system:\u003c\/strong\u003e ModWall panels (exclusive)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHardware required:\u003c\/strong\u003e None\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShipment weight:\u003c\/strong\u003e 3 lbs\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShipment dimensions:\u003c\/strong\u003e 2.25 x 17 x 5.25 in\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIncluded:\u003c\/strong\u003e 1x Vest Hanger, Instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/div\u003e\n\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\n\u003ch3\u003eWhat does the ModWall Vest Hanger work with?\u003c\/h3\u003e\n\u003cp\u003eIt is exclusively compatible with Tactical Walls ModWall panels. The hanger clips directly into the panel's mounting geometry with no additional hardware. It does not mount to standard drywall, pegboard, or other wall systems without a ModWall panel already in place.\u003c\/p\u003e\n\n\u003ch3\u003eWhat gear can I hang on this hanger?\u003c\/h3\u003e\n\u003cp\u003eThe hanger is designed for tactical vests and plate carriers, and also accommodates backpacks and jackets. The contoured two-arm design distributes weight at the shoulder points, making it suitable for heavier gear like a fully equipped plate carrier.\u003c\/p\u003e\n\n\u003ch3\u003eWhat is the hanger made of?\u003c\/h3\u003e\n\u003cp\u003eIt is constructed from HDPE (high-density polyethylene), a rigid plastic known for its load-bearing strength and resistance to cracking. This makes it durable enough to support the sustained weight of a plate carrier or loaded backpack without deforming.\u003c\/p\u003e\n\n\u003ch3\u003eDoes this include a wall adapter or mounting hardware?\u003c\/h3\u003e\n\u003cp\u003eNo. The ModWall Vest Hanger attaches directly to an existing ModWall panel without additional hardware. It does not include a direct-to-wall adapter. If you need a standalone solution that mounts directly to a wall surface, the Heavy Gear Hanger includes a direct-to-wall adapter.\u003c\/p\u003e\n\n\u003ch3\u003eWhat else can I pair with this hanger?\u003c\/h3\u003e\n\u003cp\u003eThe ModWall Helmet Hanger pairs with this unit on the same ModWall panel to create a combined gear station for a vest and helmet. Both accessories mount to the panel without tools or extra hardware.\u003c\/p\u003e\n\n\u003c\/div\u003e","brand":"Tactical Walls","offers":[{"title":"Default Title","offer_id":67013358059891,"sku":"MWVEST","price":37.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1926\/7025\/files\/DSC_2769s-sq.jpg?v=1790728846"},{"product_id":"tactical-walls-modwall-flashlight-holder","title":"Tactical Walls ModWall Flashlight Holder HDPE Wall Mount","description":"\u003cdiv class=\"rte\"\u003e\n\n\u003cp\u003eThe Tactical Walls ModWall Flashlight Holder is a modular HDPE wall mount that keeps a standard handheld flashlight accessible and secure. It attaches directly to any ModWall panel without additional hardware and mounts in either a horizontal or vertical orientation. The 1-inch opening fits most standard handheld flashlights and also accepts hooks and bungee cords for flexible gear organization. Shipping weight is 1 lb; packaged dimensions are 2 x 2.5 x 0.5 inches.\u003c\/p\u003e\n\n\u003ch2\u003eWho this is for\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eVehicle and garage organizers\u003c\/strong\u003e who want a dedicated, always-ready spot for a flashlight on a ModWall panel in a truck bed, workshop, or utility space.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTactical and outdoor gear users\u003c\/strong\u003e who run ModWall panels in a base camp, gear station, or storage room and need quick access to a handheld light.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHome and workspace organizers\u003c\/strong\u003e looking to add a single-purpose flashlight mount to an existing ModWall setup without tools or extra fasteners.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFeatures and design\u003c\/h2\u003e\n\u003cp\u003eThe holder mounts horizontally or vertically on a ModWall panel, giving you two orientation options to match your layout. The 1-inch opening is sized to fit most standard handheld flashlights. That same opening also accepts hooks, bungee cords, and similar cords, so the holder doubles as a general-purpose loop anchor when no flashlight is installed.\u003c\/p\u003e\n\u003cp\u003eAttachment is exclusive to ModWall panels. No additional hardware is required beyond the included mounting hardware. For installations without a full panel, the holder pairs with the Tactical Walls Nano Mount for a direct-to-wall solution.\u003c\/p\u003e\n\n\u003ch2\u003eMaterials and construction\u003c\/h2\u003e\n\u003cp\u003eThe holder is molded from US-sourced HDPE (high-density polyethylene) plastic. HDPE provides enough rigidity to hold gear securely while its surface is soft enough to avoid scratching or marring the finish of whatever is stored in it. The material resists moisture and impact, making it suitable for vehicle, garage, and outdoor storage environments.\u003c\/p\u003e\n\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cp\u003eThe ModWall Flashlight Holder attaches exclusively to Tactical Walls ModWall panels. It is not designed for use with third-party modular wall systems. For wall installations without a ModWall panel, pair it with the Tactical Walls Nano Mount (sold separately). It is compatible with the full ModWall accessory ecosystem, including other holders, hooks, and organizers in the ModWall lineup.\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cdiv class=\"quick-answer\"\u003e\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Tactical Walls\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e ModWall Flashlight Holder\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSKU:\u003c\/strong\u003e MWFLASHLIGHT\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOpening diameter:\u003c\/strong\u003e 1 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMounting orientation:\u003c\/strong\u003e Horizontal or vertical\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e US-sourced HDPE plastic\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCompatibility:\u003c\/strong\u003e ModWall panels; Nano Mount for direct-to-wall installation\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShipment weight:\u003c\/strong\u003e 1 lb\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShipment dimensions:\u003c\/strong\u003e 2 x 2.5 x 0.5 in\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIncluded:\u003c\/strong\u003e 1x Flashlight Holder, mounting hardware\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/div\u003e\n\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\n\u003ch3\u003eWhat does this holder work with?\u003c\/h3\u003e\n\u003cp\u003eIt attaches exclusively to Tactical Walls ModWall panels. If you do not have a ModWall panel, it also pairs with the Tactical Walls Nano Mount for a direct-to-wall installation. It is not compatible with third-party modular wall systems.\u003c\/p\u003e\n\n\u003ch3\u003eWhat size flashlight fits in the holder?\u003c\/h3\u003e\n\u003cp\u003eThe opening measures 1 inch in diameter and fits most standard handheld flashlights. Oversized or non-cylindrical lights may not seat correctly. The same opening also accepts hooks and cords such as bungee cords when no flashlight is in use.\u003c\/p\u003e\n\n\u003ch3\u003eDoes installation require any tools or extra hardware?\u003c\/h3\u003e\n\u003cp\u003eNo additional hardware is needed when mounting to a ModWall panel. Mounting hardware is included in the box. If you are using a Nano Mount for a direct-to-wall installation, that accessory is sold separately.\u003c\/p\u003e\n\n\u003ch3\u003eWhat is the holder made of?\u003c\/h3\u003e\n\u003cp\u003eIt is molded from US-sourced HDPE plastic. HDPE is rigid enough to hold gear securely and soft enough to protect the finish of stored items. It also resists moisture and impact, making it suitable for vehicle and outdoor storage environments.\u003c\/p\u003e\n\n\u003ch3\u003eCan I mount this horizontally and vertically?\u003c\/h3\u003e\n\u003cp\u003eYes. The holder supports both horizontal and vertical mounting orientations on a ModWall panel, so you can configure it to match your preferred layout or available panel space.\u003c\/p\u003e\n\n\u003c\/div\u003e","brand":"Tactical Walls","offers":[{"title":"Default Title","offer_id":67013360779635,"sku":"MWFLASHLIGHT","price":14.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1926\/7025\/files\/DSC_2633s-sq.jpg?v=1790728895"},{"product_id":"tactical-walls-vmod-jeep-tailgate-modular-organizer","title":"Tactical Walls VMod Jeep Tailgate Modular Organizer Panel","description":"\u003cdiv class=\"rte\"\u003e\n\n\u003cp\u003eThe Tactical Walls VMod Jeep Package is a tailgate-mounted modular organization system built for Jeep JK, JL, and TJ models, including Rubicon variants. HDPE panels mount directly onto the existing tailgate space in minutes, creating an accessible, customizable surface for tools, flashlights, sporting gear, and trail essentials. Each kit ships fully assembled and ready to install, with strap blocks and flashlight hangers already attached to the panel.\u003c\/p\u003e\n\n\u003ch2\u003eWho this is for\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eJeep owners and overlanders\u003c\/strong\u003e who want organized, grab-ready access to tools and gear without digging through cargo.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOff-road and 4x4 enthusiasts\u003c\/strong\u003e who need a durable, non-abrasive mounting surface that protects gear finishes on rough trails.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOutdoor and trail workers\u003c\/strong\u003e who carry flashlights, straps, and hand tools and need them secured and visible at the tailgate.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFeatures and design\u003c\/h2\u003e\n\u003cp\u003eThe VMod panel mounts to the interior face of the Jeep tailgate using the existing hardware points, adding a flat ModWall surface without permanent modification. The modular design accepts standard ModWall accessories, so the layout adapts as your gear changes. Strap blocks hold bungee cords, tie-downs, and recovery straps securely. The two included flashlight hangers keep lights accessible at the tailgate when you need them most.\u003c\/p\u003e\n\u003cp\u003ePanel dimensions are specific to each Jeep generation. The JK panel measures 26 x 13.75 x 0.5 inches. The JL panel measures 28 x 11 x 0.5 inches. The TJ panel measures 33.5 x 13.87 x 0.5 inches. All three share the same 0.5-inch profile, keeping the tailgate interior unobstructed.\u003c\/p\u003e\n\n\u003ch2\u003eMaterials and construction\u003c\/h2\u003e\n\u003cp\u003eEvery VMod panel is made in the United States from HDPE plastic. HDPE is rigid enough to support loaded accessories under trail conditions, yet non-abrasive against gear finishes, so helmets, vests, and soft cases rest against the panel without scuffing. The material resists moisture and UV exposure, making it suited for open-air and off-road environments.\u003c\/p\u003e\n\n\u003ch2\u003eIntended use\u003c\/h2\u003e\n\u003cp\u003eThe VMod system is designed for days out in the field: overlanding, trail work, search and rescue support, or any outing where organized tailgate access saves time. Strap blocks keep recovery and tie-down gear sorted. Flashlight hangers put illumination tools at hand when the tailgate drops. Additional ModWall accessories can be added to expand capacity as needed.\u003c\/p\u003e\n\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cp\u003eThree panel variants cover the most common Jeep Wrangler generations: JK (2007-2018), JL (2018-present), and TJ (1997-2006), including Rubicon trim levels for each. The ModWall accessory ecosystem is compatible across all VMod panels, so strap blocks, hangers, and other ModWall components interchange freely between panel sizes.\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cdiv class=\"quick-answer\"\u003e\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Tactical Walls\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e VMod Jeep Package\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCompatible vehicles:\u003c\/strong\u003e Jeep JK, JL, TJ, and Rubicon variants\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePanel dimensions (JK):\u003c\/strong\u003e 26 x 13.75 x 0.5 in\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePanel dimensions (JL):\u003c\/strong\u003e 28 x 11 x 0.5 in\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePanel dimensions (TJ):\u003c\/strong\u003e 33.5 x 13.87 x 0.5 in\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePanel material:\u003c\/strong\u003e HDPE plastic (non-abrasive)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCountry of manufacture:\u003c\/strong\u003e USA\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShipment weight:\u003c\/strong\u003e 10 lbs\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShipment dimensions:\u003c\/strong\u003e 35 x 20 x 5 in\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIncluded:\u003c\/strong\u003e Instructions, (1) VMod Panel, (1) VMod Back Plate, (1) 4x4 ModWall Strap Block, (2) 3x3 ModWall Strap Blocks, (2) ModWall Flashlight Hangers\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAssembly required:\u003c\/strong\u003e No — all accessories pre-assembled on panel\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/div\u003e\n\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\n\u003ch3\u003eWhich Jeep models does this fit?\u003c\/h3\u003e\n\u003cp\u003eThe VMod Jeep Package is available in three variants: JK, JL, and TJ, each with a panel sized to that generation's tailgate. Rubicon trim levels of each model are also supported. Select your Jeep generation at checkout to receive the correctly sized panel.\u003c\/p\u003e\n\n\u003ch3\u003eDoes this require drilling or permanent modification?\u003c\/h3\u003e\n\u003cp\u003eNo. The VMod panel mounts onto the existing tailgate space using the hardware points already present, so no drilling or permanent alteration to the tailgate is required. Installation takes only a few minutes.\u003c\/p\u003e\n\n\u003ch3\u003eWhat accessories are included in the box?\u003c\/h3\u003e\n\u003cp\u003eEach package includes one VMod Panel (sized to your Jeep model), one VMod Back Plate, one 4x4 ModWall Strap Block, two 3x3 ModWall Strap Blocks, two ModWall Flashlight Hangers, and installation instructions. All accessories arrive pre-assembled on the panel and are ready for immediate use.\u003c\/p\u003e\n\n\u003ch3\u003eCan I add more ModWall accessories later?\u003c\/h3\u003e\n\u003cp\u003eYes. The VMod panel uses the standard ModWall mounting system, so any compatible ModWall accessory can be added to expand or reconfigure your layout. Strap blocks, hangers, and other ModWall components are available separately.\u003c\/p\u003e\n\n\u003ch3\u003eWhat is the panel made of, and will it scratch my gear?\u003c\/h3\u003e\n\u003cp\u003eThe panels are made from HDPE plastic, manufactured in the USA. HDPE is rigid and durable under load, but its surface is non-abrasive, so helmets, soft cases, and coated tools rest against it without scuffing or finish damage.\u003c\/p\u003e\n\n\u003ch3\u003eHow heavy is the kit, and what are the shipping dimensions?\u003c\/h3\u003e\n\u003cp\u003eThe package ships at 10 lbs with box dimensions of 35 x 20 x 5 inches. The panel itself is 0.5 inches thick regardless of Jeep variant, keeping the tailgate interior profile low.\u003c\/p\u003e\n\n\u003c\/div\u003e","brand":"Tactical Walls","offers":[{"title":"jeep-jk","offer_id":67013365662067,"sku":"VMODJEEPJK","price":289.99,"currency_code":"USD","in_stock":true},{"title":"jeep-jl","offer_id":67013365694835,"sku":"VMODJEEPJL","price":289.99,"currency_code":"USD","in_stock":true},{"title":"jeep-tj","offer_id":67013365727603,"sku":"VMODJEEPTJ","price":289.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1926\/7025\/files\/DSC_1260s-scaled-sq.jpg?v=1790728957"},{"product_id":"tactical-walls-modwall-punch-set-holder","title":"Tactical Walls ModWall Punch Set Holder for Small Hand Tools","description":"\u003cdiv class=\"rte\"\u003e\n\n\u003cp\u003eThe Tactical Walls ModWall Punch Set Holder is an HDPE wall-mount organizer that stores up to 20 punches or small screwdrivers on any compatible ModWall panel. Each tool drops into an individual tapered slot sized for shafts up to 1\/4 inch in diameter, keeping your most-used hand tools visible, accessible, and clear of the workbench. Mounting hardware is included, and no additional hardware is needed beyond the ModWall panel itself.\u003c\/p\u003e\n\n\u003ch2\u003eWho this is for\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMechanics and machinists\u003c\/strong\u003e who work with punch sets daily and need every tool visible and within reach without digging through a drawer.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWorkshop owners and hobbyists\u003c\/strong\u003e who want a clean, organized wall storage system that keeps small precision drivers and punches off the bench surface.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eModWall system users\u003c\/strong\u003e who are building out a modular wall organization setup and need a dedicated slot-based holder for small-diameter hand tools.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFeatures and design\u003c\/h2\u003e\n\u003cp\u003eThe holder accommodates up to 20 individual tools in separate tapered slots. Each slot opens at 0.350 inches at the top and narrows to 0.250 inches at the bottom, which lets tools of varying shaft diameters seat securely without rattling or falling through. Tools with a shaft diameter of 1\/4 inch or less fit the slot geometry. The open-top design means every tool is visible at a glance, so you reach for the right punch without pulling the wrong one.\u003c\/p\u003e\n\u003cp\u003eThe holder attaches exclusively to Tactical Walls ModWall panels and integrates flush with the panel surface. No loose brackets or secondary fasteners are required beyond the included mounting hardware.\u003c\/p\u003e\n\n\u003ch2\u003eMaterials and construction\u003c\/h2\u003e\n\u003cp\u003eThe body is molded from high-density polyethylene (HDPE). HDPE provides enough rigidity to hold tools firmly in position while remaining soft enough to protect tool finishes from scratching or marring during insertion and removal. The material resists moisture and shop chemicals, making it suitable for garage and workshop environments.\u003c\/p\u003e\n\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cp\u003eThe Punch Set Holder is designed to mount exclusively on Tactical Walls ModWall panels. It does not attach to pegboard, drywall, or other wall systems. If you are expanding an existing ModWall setup, this holder clips in using the same integrated attachment method as other ModWall accessories, with no additional hardware beyond what is included in the box.\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cdiv class=\"quick-answer\"\u003e\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Tactical Walls\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e ModWall Punch Set Holder\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSKU:\u003c\/strong\u003e MWPUNCH\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTool capacity:\u003c\/strong\u003e Up to 20 punches or small screwdrivers\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMax shaft diameter:\u003c\/strong\u003e 1\/4 inch (0.250 in)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSlot top diameter:\u003c\/strong\u003e 0.350 in\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSlot bottom diameter:\u003c\/strong\u003e 0.250 in\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e High-density polyethylene (HDPE)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePanel compatibility:\u003c\/strong\u003e Tactical Walls ModWall panels only\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShipment weight:\u003c\/strong\u003e 2 lbs\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShipment dimensions:\u003c\/strong\u003e 14.5 x 2.125 x 0.5 in\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIncluded:\u003c\/strong\u003e 1x Punch Set Holder, mounting hardware\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/div\u003e\n\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\n\u003ch3\u003eWhat tools fit in the Punch Set Holder?\u003c\/h3\u003e\n\u003cp\u003eAny punch or small screwdriver with a shaft diameter of 1\/4 inch or less fits the slot geometry. The tapered slots run from 0.350 inches at the top to 0.250 inches at the bottom, so tools across a range of shaft sizes seat securely. Larger-diameter tools will not fit through the slot opening.\u003c\/p\u003e\n\n\u003ch3\u003eHow many tools does it hold?\u003c\/h3\u003e\n\u003cp\u003eIt holds up to 20 individual tools, each in its own dedicated slot. The separate slots keep tools from contacting each other, which protects finishes and makes it easy to grab a specific punch without disturbing the rest of the set.\u003c\/p\u003e\n\n\u003ch3\u003eDoes this work with pegboard or other wall systems?\u003c\/h3\u003e\n\u003cp\u003eNo. The Punch Set Holder attaches exclusively to Tactical Walls ModWall panels. It is not compatible with pegboard, standard drywall anchors, or other modular wall systems. A ModWall panel is required for installation.\u003c\/p\u003e\n\n\u003ch3\u003eIs any additional hardware required for installation?\u003c\/h3\u003e\n\u003cp\u003eNo additional hardware is needed beyond what is included in the box. The holder ships with mounting hardware and integrates directly with ModWall panels using the system's built-in attachment method.\u003c\/p\u003e\n\n\u003ch3\u003eWhat is the holder made of, and will it scratch my tools?\u003c\/h3\u003e\n\u003cp\u003eThe holder is molded from HDPE, a material firm enough to keep tools in place but soft enough to avoid scratching or marring tool finishes during everyday insertion and removal. It also resists moisture and common shop chemicals.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's included in the box?\u003c\/h3\u003e\n\u003cp\u003eThe box contains one Punch Set Holder and the mounting hardware needed to attach it to a ModWall panel. ModWall panels are sold separately.\u003c\/p\u003e\n\n\u003c\/div\u003e","brand":"Tactical Walls","offers":[{"title":"Default Title","offer_id":67013365825907,"sku":"MWPUNCH","price":27.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1926\/7025\/files\/punch2-scaled-sq.jpg?v=1790729009"}],"url":"https:\/\/bulletproofzone.com\/collections\/tactical-walls.oembed","provider":"Bulletproof Zone","version":"1.0","type":"link"}