{"title":"Adept Armor","description":"\u003ch2\u003eAdept Armor\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eAdept Armor\u003c\/strong\u003e is a materials engineering and industrial design firm that focuses on the development of body armor and infantry equipment. They pioneered the use of titanium alloys, semi-amorphous silica-based materials, and boron carbide ceramics in their armor plates.\u003c\/p\u003e\n\u003cp\u003eThey use the Parametricist philosophy in the creation of their products, producing designs that are as creative and original as they are functional. Since it ensures that all functional components are tested, exhibit surface continuity and aesthetic elegance, and ultimately integrate well as a system, they believe parametric design is pertinent in the construction of their armor plates.\u003c\/p\u003e","products":[{"product_id":"adept-armor-level-iii-rf1-storm-foundation","title":"Adept Storm Foundation NIJ III\/RF1 UHMWPE Body Armor Plate","description":"\u003cdiv class=\"rte\"\u003e\n\n\u003cp\u003eThe Adept Storm Foundation is a 10x12\" SAPI-cut, multi-curve UHMWPE composite hard armor plate rated NIJ III\/RF1 as a standalone system. Weighing 2.4 pounds at 0.9\" thick, it ranks among the lightest and thinnest standalone UHMWPE Level III plates available. Beyond its standalone performance, the Foundation is the base of the modular Storm System — it can be up-armored in seconds with the Storm Titanium add-on to reach Level III+ or with the Storm Disruptor add-on to reach Level IV, without swapping carriers or changing your loadout.\u003c\/p\u003e\n\n\u003ch2\u003eWho this is for\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMobility-focused professionals:\u003c\/strong\u003e anyone who needs full rifle-threat coverage at the lowest possible plate weight — 2.4 lbs per plate means a two-plate setup runs under 5 lbs total.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePlanners who expect evolving threats:\u003c\/strong\u003e the modular Storm System lets you add the Titanium or Disruptor strike-face on demand, so the Foundation serves as both a standalone daily plate and a scalable base layer.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaritime and water-environment operators:\u003c\/strong\u003e the UHMWPE composite construction is buoyant, making the Foundation a direct fit for applications where a steel or ceramic plate would create a drowning hazard.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eBallistic performance\u003c\/h2\u003e\n\n\u003cp\u003eAs a standalone plate, the Storm Foundation stops the following rifle threats:\u003c\/p\u003e\n\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n\u003cth\u003eRound\u003c\/th\u003e\n\u003cth\u003eCondition \/ Velocity\u003c\/th\u003e\n\u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003e7.62x51mm M80 Ball\u003c\/td\u003e\n\u003ctd\u003e2,800 fps\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e5.56x45mm M193\u003c\/td\u003e\n\u003ctd\u003e3,300 fps\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e7.62x39mm MSC (mild steel core)\u003c\/td\u003e\n\u003ctd\u003e2,400 fps\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e5.45x39mm AK74 MSC\u003c\/td\u003e\n\u003ctd\u003eRated\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e7.62x54mmR LPS\u003c\/td\u003e\n\u003ctd\u003eRated\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eAll handgun threats\u003c\/td\u003e\n\u003ctd\u003eRated\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cp\u003eThe Foundation does not stop steel-penetrator rounds such as the 5.56x45mm M855 (SS109) at standalone. This is an inherent characteristic of all standalone UHMWPE Level III plates. If M855 or AP-class threats are expected, pair the Foundation with the Storm Titanium (reaching Level III+ coverage) or the Storm Disruptor (reaching Level IV coverage against .30-06 APM2 and 7.62x51mm M80A1).\u003c\/p\u003e\n\n\u003cp\u003eThe plate is multi-hit capable. UHMWPE composite armor distributes and dissipates projectile energy across a highly crystalline fiber matrix, and the Foundation's construction — using an architected UHMWPE lay-up methodology, high-pressure consolidation, and advanced patent-pending thermochemical treatments — is specifically engineered to preserve structural integrity across multiple impacts.\u003c\/p\u003e\n\n\u003ch2\u003eModular up-armor system\u003c\/h2\u003e\n\n\u003cp\u003eThe Storm Foundation is the base plate in Adept's modular Storm System. Two strike-face add-ons are available separately:\u003c\/p\u003e\n\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n\u003cth\u003eConfiguration\u003c\/th\u003e\n\u003cth\u003eEffective Rating\u003c\/th\u003e\n\u003cth\u003eAdditional threats stopped\u003c\/th\u003e\n\u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eFoundation (standalone)\u003c\/td\u003e\n\u003ctd\u003eNIJ III \/ RF1\u003c\/td\u003e\n\u003ctd\u003eM80, M193, 7.62x39 MSC, 5.45x39 MSC, 7.62x54R LPS, all handgun\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eFoundation + Storm Titanium\u003c\/td\u003e\n\u003ctd\u003eLevel III+\u003c\/td\u003e\n\u003ctd\u003eAdds 5.56x45mm M855 (SS109)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eFoundation + Storm Disruptor\u003c\/td\u003e\n\u003ctd\u003eLevel IV\u003c\/td\u003e\n\u003ctd\u003eAdds .30-06 APM2 and 7.62x51mm M80A1\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cp\u003eThe Titanium and Disruptor strike-faces fit directly over the Foundation and lock in place within seconds. No tools required. This means a single Foundation plate can serve across three distinct threat levels depending on what you attach — a flexibility no monolithic plate offers.\u003c\/p\u003e\n\n\u003ch2\u003ePlate compatibility and cut geometry\u003c\/h2\u003e\n\n\u003cp\u003eThe Storm Foundation ships in a 10x12\" SAPI profile (dimensions nominal). SAPI cut plates seat correctly in the vast majority of plate carriers on the market, including those designed for 10x12\" plates with SAPI-compatible pockets. The multi-curve geometry — curved on both the vertical and horizontal axes — presses flush against the torso and eliminates the gap that single-curve plates leave at the shoulders and waist. This reduces bounce during movement and improves all-day wearability.\u003c\/p\u003e\n\n\u003cp\u003eIf you need fitment confirmation for a specific carrier, contact us before ordering.\u003c\/p\u003e\n\n\u003ch2\u003eConstruction and materials\u003c\/h2\u003e\n\n\u003cp\u003eUltra-high molecular weight polyethylene (UHMWPE) fibers are made from long, highly crystalline, highly oriented chains of the polyethylene polymer (C2H4). The material offers an outstanding performance-to-weight ratio: the carbon-carbon bond strength is high, the intrinsic defect rate is low, and the specific gravity sits at just 0.96 g\/cc — well below water, which is why UHMWPE plates float. UHMWPE-resin fiber composites perform exceptionally in body armor, enabling rifle-rated hard plates at weights that ceramic or steel plates cannot approach.\u003c\/p\u003e\n\n\u003cp\u003eThe Foundation adds several proprietary manufacturing steps to baseline UHMWPE construction: an architected lay-up methodology that controls fiber orientation across the plate cross-section, high-pressure consolidation to minimize voids, and patent-pending thermochemical treatments that modify the fiber-matrix interface for improved energy absorption. A highly rigid and durable foam system completes the build, contributing to the 0.9\" thickness profile.\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cdiv class=\"quick-answer\"\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand \/ Model:\u003c\/strong\u003e Adept Storm Foundation\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSKU:\u003c\/strong\u003e STRM-FNDTN-II\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCut:\u003c\/strong\u003e 10x12\" SAPI (dimensions nominal)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCurve:\u003c\/strong\u003e Multi-curve\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e UHMWPE composite\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 2.4 lbs per plate\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThickness:\u003c\/strong\u003e 0.9\"\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStandalone threat rating:\u003c\/strong\u003e NIJ III \/ RF1\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUp-armor options:\u003c\/strong\u003e Storm Titanium (Level III+); Storm Disruptor (Level IV)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBuoyant:\u003c\/strong\u003e Yes — UHMWPE specific gravity 0.96 g\/cc\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePrice:\u003c\/strong\u003e Per plate (single plate)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eFit and carrier compatibility\u003c\/h2\u003e\n\n\u003cp\u003eThe 10x12\" SAPI profile fits any plate carrier with a 10x12\" SAPI-compatible plate pocket. At 0.9\" thick and with a multi-curve profile, the Foundation seats cleanly without requiring oversized pockets. Because the Storm Titanium and Disruptor add-ons fit over the outside of the Foundation, verify that your carrier's plate pocket has enough depth to accommodate the combined thickness when running the up-armored configuration. Contact us if you need compatibility guidance for a specific carrier.\u003c\/p\u003e\n\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\n\u003ch3\u003eCan this plate be shipped to my state?\u003c\/h3\u003e\n\u003cp\u003eThis plate cannot be shipped to New York or Connecticut due to state body armor restrictions. It is also subject to US export regulations. Under 18 U.S.C. § 931, anyone with a federal felony conviction for a crime of violence is prohibited from purchasing or possessing body armor.\u003c\/p\u003e\n\n\u003ch3\u003eIs the Storm Foundation NIJ Certified or NIJ Listed?\u003c\/h3\u003e\n\u003cp\u003eThe Foundation carries a standalone threat rating of NIJ III\/RF1 and is independently tested against NIJ threat parameters. NIJ Listed status under the NIJ Compliant Products List is separate from threat-rating claims — check the current NIJ CPL at nij.ojp.gov for verified listing status.\u003c\/p\u003e\n\n\u003ch3\u003eWill this plate stop M855 or armor-piercing rounds?\u003c\/h3\u003e\n\u003cp\u003eNo — not at standalone. M855 (SS109) has a steel penetrator that defeats UHMWPE-only plates at all Level III ratings. To stop M855, pair the Foundation with the Storm Titanium add-on, which brings the combined system to Level III+ and adds M855 coverage. For AP-class threats including .30-06 APM2, add the Storm Disruptor for Level IV coverage.\u003c\/p\u003e\n\n\u003ch3\u003eWhat is the difference between Level III, Level III+, and Level IV in the Storm System?\u003c\/h3\u003e\n\u003cp\u003eAt standalone (Level III\/RF1), the Foundation stops lead-core and mild-steel-core rifle rounds including M80, M193, and 7.62x39 MSC. Add the Storm Titanium and the system reaches Level III+, adding M855. Add the Storm Disruptor instead and the system reaches Level IV, stopping .30-06 APM2 and 7.62x51mm M80A1 in addition to all lesser rifle threats.\u003c\/p\u003e\n\n\u003ch3\u003eHow heavy is a two-plate setup with the Foundation?\u003c\/h3\u003e\n\u003cp\u003eEach Foundation plate weighs 2.4 lbs. A front-and-back two-plate setup therefore weighs 4.8 lbs total — roughly one full pound less than a comparable two-plate setup using an industry-average UHMWPE Level III plate at 3.1 lbs each.\u003c\/p\u003e\n\n\u003ch3\u003eWhy is UHMWPE buoyant and why does that matter?\u003c\/h3\u003e\n\u003cp\u003eUHMWPE has a specific gravity of 0.96 g\/cc, slightly below water's 1.0 g\/cc, so the plates float. For maritime operations, water crossings, or any scenario where an unexpected water entry is possible, a buoyant plate removes a significant drowning hazard that steel or ceramic plates — both of which sink — cannot address.\u003c\/p\u003e\n\n\u003c\/div\u003e","brand":"Adept Armor","offers":[{"title":"Default Title","offer_id":41752714739883,"sku":"ADP-STRM-FNDTN","price":339.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1926\/7025\/files\/image-01_0355cf6b-de7d-4842-a0b9-b2db02cd3c10.jpg?v=1779853253"},{"product_id":"adept-armor-storm-disruptor-level-iv-standalone-up-armorable-hard-armor-plate","title":"Adept Armor Storm Disruptor Level IV Standalone Up-Armorable Hard Armor Plate","description":"\u003ch1\u003eAdept Armor Storm Disruptor Level IV Standalone Up-Armorable Hard Armor Plate\u003c\/h1\u003e\n\u003cp\u003e\u003cspan\u003eThe Storm Disruptor is a ceramic add-on plate for the Storm: Foundation which improves protection to NIJ Level 4 body armor (RF3).  This unprecedented level of performance and modularity is made possible by high-precision ceramic manufacturing technologies and innovative ceramic toughening techniques.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe Disruptor must be used in conjunction with the Foundation; as a standalone plate it offers no meaningful ballistic resistance.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Specifications: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e10×12” SAPI\u003c\/li\u003e\n\u003cli\u003eMulti-curve\u003c\/li\u003e\n\u003cli\u003eMonolithic toughened ceramic construction\u003c\/li\u003e\n\u003cli\u003eThickness: 0.35”\u003c\/li\u003e\n\u003cli\u003eWeight: 3.6 pounds\u003c\/li\u003e\n\u003cli\u003eStandalone threat rating: NONE.\u003c\/li\u003e\n\u003cli\u003eThreat rating in conjunction with Storm: Foundation: Level IV \/ RF3 (.30-06 AP M2.)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4 style=\"text-align: center;\" data-mce-style=\"text-align: center;\"\u003e\n\u003cspan style=\"color: #000000;\" data-mce-style=\"color: #000000;\"\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Type \u0026amp; Features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eCeramic Composite Body Armor\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e“Composite armor” is armor which consists of two or more different material components. In body armor, the most common type is “ceramic composite armor” which consists of a ceramic strike-face over a UHMWPE composite backer. These plates are made in two parts. The primary component is a layer of a technical ceramic such as alumina, silicon carbide, or boron carbide. These ceramics are brittle, and must be bonded to a secondary component — a backup layer — which is made of a high-modulus, strong, and damage tolerant material.\u003c\/p\u003e\n\u003cp\u003eIn practice, this backup layer is usually a fiber-resin composite. If the ceramic is not paired with a backup layer, it will fail in tension — and, for all intents and purposes, simply shatter — as soon as it is impacted by any bullet. The backup layer prevents tensile failure, so that the ceramic — which invariably has a low tensile strength but a very high compressive strength — can only fail in compression.\u003c\/p\u003e\n\u003cp\u003eThe Storm Disruptor is a modular strike face intended for use with the Storm Foundation. It does not incorporate a backup layer and has no intrinsic or standalone ballistic resistance. But, when paired with the Storm Foundation, it offers excellent protection from AP rounds.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eModular Body Armor Plate\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eModular body armor plates, a relatively new concept, consist of UHMWPE composite armor plates with removable strike-faces. They can be used without those strike faces in lower-threat environments, but can be up-armored in mere seconds should the mission call for it. The Storm System is the industry’s premier modular body armor plate system — it is the lightest, most intuitive, and most straightforward.\u003c\/p\u003e\n\u003cp\u003eThe Storm Disruptor can be paired with the Storm Foundation, and this combination offers lightweight protection from AP threats, such as the .30-06 APM2, the 7.62x54mmR B-32 API, and the 5.56x45mm M995.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Material and Features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSilicon Carbide – Titanium Diboride Composite Ceramic\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSilicon carbide is a ceramic compound derived from silicon and carbon at a 1:1 atomic ratio. With a low density of 3.2 gm\/cc, good hardness and strength, and a highly stable diamond-like molecular and crystalline structure, silicon carbide is a popular high-performance ceramic armor material, suitable for Level III plates, Level IV plates, and heavier vehicular and aerospace applications.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDensity: 3.2 gm\/cc\u003c\/li\u003e\n\u003cli\u003eHardness (Vickers): 2200-2800 HV1\u003c\/li\u003e\n\u003cli\u003eFracture toughness: 3 – 4 MPa · m^1\/2\u003c\/li\u003e\n\u003cli\u003eCompressive strength: ~3500 – 4900 MPa\u003c\/li\u003e\n\u003cli\u003eMelting point: 2730°C\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe silicon carbide in the Storm Disruptor is toughened, which facilitates its use in modular armor plating.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Rating and Benefits:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLevel IV Body Armor\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eLevel IV body armor is armor that complies with the NIJ 0101.06 or 0101.04 Level IV specification and is rated to stop at least one shot of .30-06 APM2 at approximately 2880 feet per second. The APM2 — an extremely tough test for any armor plate — has featured in the NIJ’s tests from the early days of the 0101.00 specification, and looks as though it is set to continue as the “Rifle 3” or “RF3” test projectile in the forthcoming 0101.07 specification.\u003c\/p\u003e\n\u003cp\u003eThe Storm Disruptor is Level IV rated if, and only if, it is combined with the Storm Foundation. It has no intrinsic ballistic resistance.\u003c\/p\u003e\n\u003cdiv style=\"text-align: center;\" data-mce-style=\"text-align: center;\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv style=\"text-align: center;\" data-mce-style=\"text-align: center;\"\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"text-align: start;\" data-mce-style=\"text-align: start;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1926\/7025\/files\/Storm_System_infographic2_1024x1024.png?v=1651768508\" style=\"float: none;\" data-mce-style=\"float: none;\"\u003e\u003c\/div\u003e","brand":"Adept Armor","offers":[{"title":"Default Title","offer_id":41752835588267,"sku":"ADP-STRM-DSRPTR","price":279.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1926\/7025\/files\/adept-armor-storm-disruptor-level-iv-standalone-up-armorable-hard-armor-plate-660182.jpg?v=1737706963"},{"product_id":"adept-armor-storm-titanium-level-iiia-standalone-up-armorable-hard-armor-plate","title":"Adept Armor Storm Titanium Level IIIA Stab Hard Armor Plate SAPI","description":"\u003cdiv class=\"rte\"\u003e\n\u003cp\u003eThe Adept Armor Storm: Titanium is a 10x12\" SAPI-cut, multi-curve titanium alloy hard armor plate rated as a standalone Level IIIA and Knife\/Spike Level III ballistic and anti-stab plate. At 0.2\" thick and 3.3 lbs, it delivers an exceptionally low profile for a hard plate. Paired with the Storm: Foundation UHMWPE composite plate, the combination upgrades to full RF2 protection against M855 and similar steel-core rifle ball threats. Available as a single plate at $350.00, with a lead time of in-stock and ships within 48 hours.\u003c\/p\u003e\n\n\u003ch2\u003eWho this is for\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eConcealed or low-profile carriers:\u003c\/strong\u003e anyone who needs hard plate protection at near-soft-armor thickness and wants stab resistance in the same panel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStorm: Foundation owners:\u003c\/strong\u003e users of the Foundation plate who want to upgrade to RF2-level rifle protection against M855, 7.62x39mm MSC, and similar steel-core threats\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHigh-risk professionals:\u003c\/strong\u003e personnel operating in environments where edged weapon threats accompany ballistic risks, requiring Knife-3 and Spike-3 certified coverage\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eBallistic performance\u003c\/h2\u003e\n\u003cp\u003eAs a standalone plate, the Storm: Titanium stops .44 Magnum at 1,440 fps, .357 Magnum at 1,400 fps, and 9mm FMJ at 1,400 fps — meeting the NIJ 0101.06 Level IIIA handgun threat specification. Its monolithic titanium alloy construction also provides Knife-3 and Spike-3 anti-stab performance, rated at 64+ Joules for both edged weapon and spike threats. That combination of ballistic and stab resistance is not achievable with soft Level IIIA panels, making this plate genuinely in a different class from woven aramid or UHMWPE soft armor.\u003c\/p\u003e\n\n\u003cp\u003eWhen paired with the Storm: Foundation plate, the combined system achieves RF2 — protection from steel-core rifle ball threats including 5.56x45mm M855 (SS109), 7.62x51mm M80, 7.62x39mm AK47 MSC, 5.56x45mm M193, 5.45x39mm AK74 MSC, and 7.62x54mmR LPS. The Foundation + Titanium stack constitutes a Level III+ body armor system, stopping both lead-core ball rounds and steel-penetrator threats that defeat standard Level III.\u003c\/p\u003e\n\n\u003ch3\u003eStandalone threat coverage at a glance\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n\u003cth\u003eThreat\u003c\/th\u003e\n\u003cth\u003eVelocity \/ Energy\u003c\/th\u003e\n\u003cth\u003eResult\u003c\/th\u003e\n\u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003e.44 Magnum\u003c\/td\u003e\n\u003ctd\u003e1,440 fps\u003c\/td\u003e\n\u003ctd\u003eStopped\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e.357 Magnum\u003c\/td\u003e\n\u003ctd\u003e1,400 fps\u003c\/td\u003e\n\u003ctd\u003eStopped\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e9mm FMJ\u003c\/td\u003e\n\u003ctd\u003e1,400 fps\u003c\/td\u003e\n\u003ctd\u003eStopped\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eEdged weapon\u003c\/td\u003e\n\u003ctd\u003e64+ Joules\u003c\/td\u003e\n\u003ctd\u003eKnife-3 rated\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSpike\u003c\/td\u003e\n\u003ctd\u003e64+ Joules\u003c\/td\u003e\n\u003ctd\u003eSpike-3 rated\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eFoundation + Titanium combined threat coverage\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n\u003cth\u003eThreat\u003c\/th\u003e\n\u003cth\u003eSystem rating\u003c\/th\u003e\n\u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003e5.56x45mm M855 (SS109)\u003c\/td\u003e\n\u003ctd\u003eRF2 \/ Level III+\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e7.62x51mm M80\u003c\/td\u003e\n\u003ctd\u003eRF2 \/ Level III+\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e7.62x39mm AK47 MSC\u003c\/td\u003e\n\u003ctd\u003eRF2 \/ Level III+\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e5.56x45mm M193\u003c\/td\u003e\n\u003ctd\u003eRF2 \/ Level III+\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e5.45x39mm AK74 MSC\u003c\/td\u003e\n\u003ctd\u003eRF2 \/ Level III+\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e7.62x54mmR LPS\u003c\/td\u003e\n\u003ctd\u003eRF2 \/ Level III+\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003ePlate compatibility and cut geometry\u003c\/h2\u003e\n\u003cp\u003eThe Storm: Titanium is cut to the standard 10x12\" SAPI geometry with a multi-curve profile, fitting the front and rear plate pockets of any carrier that accepts 10x12\" SAPI plates. The multi-curve contour matches the natural torso shape, distributing the plate's 3.3 lb mass evenly and reducing pressure points during extended wear.\u003c\/p\u003e\n\n\u003cp\u003eAs a modular component of the Storm system, this plate is designed to pair directly with the Storm: Foundation UHMWPE composite plate. The Foundation provides the primary ballistic substrate; the Titanium strike-face snaps on in seconds to up-armor the system from Level IIIA standalone to full RF2. The Titanium can be removed just as quickly when the mission profile does not require rifle-rated coverage, reducing carried weight without swapping carriers.\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cdiv class=\"quick-answer\"\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Adept Armor\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e Storm: Titanium\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSKU:\u003c\/strong\u003e STRM-TTNM\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCut:\u003c\/strong\u003e 10x12\" SAPI\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCurve:\u003c\/strong\u003e Multi-curve\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e Monolithic titanium alloy\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThickness:\u003c\/strong\u003e 0.2\"\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 3.3 lbs (per plate)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStandalone threat rating:\u003c\/strong\u003e NIJ IIIA (handgun); Knife-3; Spike-3\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCombined system rating (with Storm: Foundation):\u003c\/strong\u003e Special Threat Rated RF2 \/ Level III+ — M855 and steel-core rifle ball threats\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePrice:\u003c\/strong\u003e Per plate\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAvailability:\u003c\/strong\u003e In stock — ships within 48 hours\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eFit and carrier compatibility\u003c\/h2\u003e\n\u003cp\u003eThe 10x12\" SAPI cut fits any plate carrier with a standard 10x12\" front or rear plate pocket. The 0.2\" plate thickness places minimal depth demand on plate pockets, leaving room for a soft armor backer if desired. The multi-curve profile seats flush in contoured pockets without rocking. If you need help confirming fit for a specific carrier, contact us.\u003c\/p\u003e\n\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\n\u003ch3\u003eWhat does Level IIIA mean for this plate?\u003c\/h3\u003e\n\u003cp\u003eLevel IIIA is an NIJ 0101.06 threat designation covering high-velocity handgun rounds. As a standalone plate, the Storm: Titanium stops .44 Magnum at 1,440 fps, .357 Magnum at 1,400 fps, and 9mm FMJ at 1,400 fps. Unlike soft IIIA panels, it also provides Knife-3 and Spike-3 anti-stab protection at 64+ Joules — something no woven fiber soft armor achieves.\u003c\/p\u003e\n\n\u003ch3\u003eWill this plate stop rifle rounds on its own?\u003c\/h3\u003e\n\u003cp\u003eNo — as a standalone plate, the Storm: Titanium is rated to Level IIIA (handgun threats only). It does not stop rifle rounds on its own. Paired with the Storm: Foundation UHMWPE composite plate, the combined system achieves RF2 \/ Level III+, stopping M855, M80, 7.62x39mm MSC, and other steel-core rifle ball threats listed in the threat table above.\u003c\/p\u003e\n\n\u003ch3\u003eWhat is the difference between Level III+ and RF2?\u003c\/h3\u003e\n\u003cp\u003eLevel III+ is a vendor-specific designation indicating protection beyond the NIJ 0101.06 Level III standard — specifically, the ability to stop M855 green-tip and similar steel-core threats that Level III does not reliably defeat. RF2 is the equivalent designation in the NIJ 0101.07 framework. The Foundation + Titanium system meets both framings: it stops M855, M193, M80, 7.62x39mm MSC, 5.45x39mm MSC, and 7.62x54mmR LPS.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the modular system work?\u003c\/h3\u003e\n\u003cp\u003eThe Storm: Titanium is a removable titanium strike-face that pairs with the Storm: Foundation UHMWPE composite plate. The Foundation handles lead-core and mild-steel-core ball threats at Level III. Attaching the Titanium upgrades the system to RF2 in seconds, adding protection against M855 and steel-penetrator rounds. Remove the Titanium when rifle threats are not a concern and the Foundation reverts to a lighter standalone plate.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the titanium construction compare to steel IIIA plates?\u003c\/h3\u003e\n\u003cp\u003eAt 3.3 lbs in a 10x12\" SAPI form factor, the Storm: Titanium is substantially lighter than comparable steel plates marketed as IIIA-rated. Titanium alloy exhibits a very high strength-to-weight ratio and is highly damage tolerant, which suits it well for light armor applications. It also adds Knife-3 and Spike-3 anti-stab coverage that steel plates do not inherently provide through NIJ stab rating.\u003c\/p\u003e\n\n\u003ch3\u003eCan this plate be shipped to my state?\u003c\/h3\u003e\n\u003cp\u003eThe Storm: Titanium cannot be shipped to New York or Connecticut due to state body armor restrictions. It is subject to US export regulations. Under 18 U.S.C. § 931, anyone with a federal felony conviction for a crime of violence is prohibited from purchasing or possessing body armor.\u003c\/p\u003e\n\n\u003c\/div\u003e","brand":"Adept Armor","offers":[{"title":"Default Title","offer_id":41752883036331,"sku":"ADP-STRM-TTNM","price":364.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1926\/7025\/files\/image-01_0bc9476e-9f85-4877-bf0c-aa501378640e.jpg?v=1779851260"},{"product_id":"adept-armor-colossus-vpam-12-standalone-hard-armor-plate","title":"Adept Armor Colossus VPAM 12 Standalone Hard Armor Plate","description":"\u003ch1\u003eAdept Armor Colossus VPAM 12 Standalone Hard Armor Plate\u003c\/h1\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong\u003eRF3 Armor Plate Colossus\u003c\/strong\u003e: Threats are evolving. The .30-06 M2 AP projectile is nearly 100 years old, and, in a military context, is practically obsolete.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003eThe Colossus™ is a future-proofed armor plate built strong enough to counter today's most modern AP threats -- and the emerging AP threats of tomorrow. Built to handle the rigors of war against peer adversaries, it offers protective capabilities far beyond the run-of-the-mill Level IV or RF3 plate, yet weighs just over six pounds, far less than the average Level IV or RF3 plate.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Details: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eManufacturer: Adept Armor\u003c\/li\u003e\n\u003cli\u003eProduct type: Hard Armor Plate\u003c\/li\u003e\n\u003cli\u003eProduct configuration: Stand alone\u003c\/li\u003e\n\u003cli\u003eType of protective cover: Durable thermoplastic wrap\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eBallistic rating: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eVPAM 12:\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp style=\"padding-left: 60px;\"\u003e7.62x51mm Swiss P AP (tungsten core) at 810 m\/s\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eVPAM 11:\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp style=\"padding-left: 60px;\"\u003e7.62x51mm M993 (tungsten core) at 940 m\/s\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eLevel IV (RF3):\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp style=\"padding-left: 60px;\"\u003e.30-06 AP M2 at 880 m\/s\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eSpecial Threats:\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\n\u003cp style=\"padding-left: 60px;\"\u003e7.62x54mmR B32 API at 860 m\/s\u003cbr\u003e5.56x45mm M995 at 1000 m\/s\u003cbr\u003e5.45x39mm AP at 880 m\/s\u003cbr\u003eSimilar and lesser threats.\u003cbr\u003e\u003c\/p\u003e\n\u003cstrong\u003eProduct Specifications: \u003c\/strong\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cul\u003e\n\u003cli\u003eThickness: 1.13” \/\/ 28.7mm\u003c\/li\u003e\n\u003cli\u003eWeight: 6.5 pounds \/\/ 2.95kg (based on 10x12” Shooter’s Cut)\u003c\/li\u003e\n\u003cli\u003eCurvature: Multi-Curve\u003c\/li\u003e\n\u003cli\u003eComposition: Advanced SiC-TiB2 ceramic, Vectran, UHMWPE Composite, thermoplastic wrap\u003c\/li\u003e\n\u003cli\u003eSpecialty: Peerless protection from the most advanced small arms threats.\u003c\/li\u003e\n\u003cli\u003eSizes: 10x12” Shooter’s Cut\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe Colossus™ is the culmination of years of R\u0026amp;D in ceramic armor materials and systems. It was designed from the ground-up to be the strongest plate in its category while maintaining a below-average weight: First, by utilizing the most advanced materials available anywhere; second, by stripping plate construction down to the ruthless essentials, until the plate is all lean muscle and bone, without a surplus molecule anywhere on the thing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBuilt to stop:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e7.62x51mm Ruag Swiss P AP at 2660 fps\u003c\/li\u003e\n\u003cli\u003e7.62x51mm M993 at 3100 fps\u003c\/li\u003e\n\u003cli\u003e.30-06 M2 AP at well over 2880 fps\u003c\/li\u003e\n\u003cli\u003e7.62x51mm M80A1 at well over 3100 fps\u003c\/li\u003e\n\u003cli\u003eStandoff protection from .50 Caliber M33 Ball\u003c\/li\u003e\n\u003cli\u003eAll lesser threats such as M995, M193, .270, .22-250, etc.\u003c\/li\u003e\n\u003cli\u003eJust as importantly, the Colossus armor plate is engineered for near-future peer conflict -- built to stop emerging military AP threats.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Features and Benefits:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSiC-TiB2 composite strike-face. A next-gen ceramic material developed specifically to counter tungsten-cored small arms threats.\u003c\/li\u003e\n\u003cli\u003eNext-gen UHMWPE backer.\u003c\/li\u003e\n\u003cli\u003eHigh-strength Vectran Liquid Crystal Polymer cladding layer on the strike-face.\u003c\/li\u003e\n\u003cli\u003eResilient, premium-grade thermoplastic foam on the strike-face, for drop protection, and on the body side, for trauma reduction. On the body side, this serves as an integrated trauma pad.\u003c\/li\u003e\n\u003cli\u003eComfortable and form-fitting multi-curve geometry.\u003c\/li\u003e\n\u003cli\u003eJust 6.5 pounds (2.95kg) and 1.18\" thick.\u003c\/li\u003e\n\u003cli\u003eA full-sized strike face with full edge-to-edge ceramic coverage.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Adept Armor","offers":[{"title":"Default Title","offer_id":41752899322027,"sku":"ADP-CLSSS","price":654.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1926\/7025\/files\/adept-armor-colossus-vpam-12-standalone-hard-armor-plate-992307.jpg?v=1737706962"},{"product_id":"adept-armor-the-novasteel-buckler","title":"ADE NovaSteel Buckler Level IIIA Ballistic Shield","description":"\u003cdiv class=\"rte\"\u003e\n\n\u003cp\u003eThe ADE NovaSteel Buckler is a 12.2-inch, 3-pound ballistic shield forged from a proprietary NovaSteel ballistic alloy and rated to Level IIIA \/ VPAM-3. It fills the coverage gap left by conventional body armor and helmet systems, protecting the face, neck, upper torso, and arms — areas that standard plates and vests leave exposed. The ambidextrous handle deploys instantly with either hand, and the flat, heat-resistant profile stores in a car door, backpack, or beside the bed without taking up meaningful space.\u003c\/p\u003e\n\n\u003ch2\u003eWho this is for\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHome defenders:\u003c\/strong\u003e the Buckler stores within arm's reach and deploys faster than a vest, covering the face and neck during a close-quarters threat response.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eConcealed-carry practitioners:\u003c\/strong\u003e the flat shoulder of the disc stabilizes a handgun and shields the user's most vulnerable areas while returning fire.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLaw enforcement and security professionals:\u003c\/strong\u003e the rigid alloy edge functions as a non-lethal compliance weapon without sacrificing ballistic integrity.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eThreat rating and coverage area\u003c\/h2\u003e\n\u003cp\u003eThe NovaSteel Buckler is rated Level IIIA \/ VPAM-3. NIJ-accredited lab testing has been conducted against .44 Magnum 240-grain SJHP, 9 mm 124-grain FMJ, and .357 Magnum 158-grain FMJ rounds. A downloadable NIJ-accredited lab report is available on the product page. This rating covers the handgun threat spectrum addressed by Level IIIA and the equivalent VPAM-3 European standard.\u003c\/p\u003e\n\n\u003cp\u003eAt 12.2 inches in diameter, the Buckler is larger than most Level IIIA-rated backpack armor panels while remaining a fraction of the footprint of a full shield. The disc is designed to be held away from the body at arm's length, which extends its effective coverage area well beyond what its stated diameter suggests — protecting the neck and face in addition to the upper torso and arms.\u003c\/p\u003e\n\n\u003ch2\u003eWeight and mobility\u003c\/h2\u003e\n\u003cp\u003eAt 3 pounds, the Buckler is light enough to benefit from the user's autonomic startle-flinch response. With practice, that reactive motion alone can bring the disc into a protective position. Single-hand deployment leaves the dominant hand free for a firearm, a door, or a secondary tool. The flat profile and heat-resistant handle mean the disc does not deform or become uncomfortable in a hot vehicle or during extended carry.\u003c\/p\u003e\n\n\u003ch2\u003eViewport and design features\u003c\/h2\u003e\n\u003cp\u003eThe NovaSteel Buckler is forged from a proprietary ballistic steel alloy and finished with a corrosion-resistant coating that resists rain, sweat, and salt spray. The alloy is impervious to ambient temperature extremes. The ambidextrous grip is flat — not protruding — so the disc sits flush against a car door panel, the side pocket of a backpack, or a bedside surface. The handle and boss are both designed for compliance use: the rigid alloy edge concentrates force for non-lethal strikes, and the central boss provides a secondary impact point. A dedicated gun-mounting accessory (sold separately) allows integral firearm attachment to the disc.\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cdiv class=\"quick-answer\"\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand \/ Model:\u003c\/strong\u003e ADE NovaSteel Buckler\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThreat rating:\u003c\/strong\u003e Level IIIA \/ VPAM-3\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBallistic test rounds:\u003c\/strong\u003e .44 Mag 240-gr SJHP; 9 mm 124-gr FMJ; .357 Mag 158-gr FMJ (NIJ-accredited lab report available)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 12.2 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 3 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e Proprietary NovaSteel ballistic alloy; corrosion-resistant coating\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHandle:\u003c\/strong\u003e Flat, heat-resistant, ambidextrous\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAccessory compatibility:\u003c\/strong\u003e Lights and other accessories; optional gun-mounting attachment (sold separately)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSKU:\u003c\/strong\u003e BCKLR\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\n\u003ch3\u003eCan this shield be shipped to my state?\u003c\/h3\u003e\n\u003cp\u003eYes, ballistic shields are not subject to the same state-level restrictions as body armor worn on the person. Under 18 U.S.C. § 931, anyone with a federal felony conviction for a crime of violence is prohibited from purchasing or possessing body armor. Contact us if you have questions about your specific jurisdiction.\u003c\/p\u003e\n\n\u003ch3\u003eWhat NIJ level is this shield?\u003c\/h3\u003e\n\u003cp\u003eLevel IIIA \/ VPAM-3. The Buckler has been tested at an NIJ-accredited laboratory against .44 Magnum 240-grain SJHP, 9 mm 124-grain FMJ, and .357 Magnum 158-grain FMJ. A downloadable lab report is available on the product listing. Level IIIA covers the full practical handgun threat spectrum but does not protect against rifle rounds.\u003c\/p\u003e\n\n\u003ch3\u003eHow heavy is the shield?\u003c\/h3\u003e\n\u003cp\u003e3 pounds. That weight is intentional — light enough that the body's natural flinch reflex can move it into a protective position reactively, without trained muscle memory alone. Single-handed use leaves the other hand free for a firearm or door handle.\u003c\/p\u003e\n\n\u003ch3\u003eIs this for tactical or civilian use?\u003c\/h3\u003e\n\u003cp\u003eBoth. The Buckler is designed for home defense, vehicle carry, and everyday personal protection for civilians, and it also functions as a compliance weapon for law enforcement and security professionals. The ambidextrous handle and flat profile make it practical across both contexts without modification.\u003c\/p\u003e\n\n\u003ch3\u003eCan this be paired with a light or laser?\u003c\/h3\u003e\n\u003cp\u003eYes. The Buckler accepts lights and other accessories. A dedicated gun-mounting attachment is also available separately, which allows a handgun to be stabilized on the disc's flat shoulder while the shield covers the user's face, neck, and upper torso.\u003c\/p\u003e\n\n\u003ch3\u003eWhat rounds does this defeat?\u003c\/h3\u003e\n\u003cp\u003eThe Buckler is rated Level IIIA \/ VPAM-3 and has been tested against .44 Magnum 240-grain SJHP, 9 mm 124-grain FMJ, and .357 Magnum 158-grain FMJ at an NIJ-accredited laboratory. It also provides defense against edged weapons, blunt impact weapons, and animal attacks. It does not protect against rifle-caliber threats.\u003c\/p\u003e\n\n\u003c\/div\u003e","brand":"Adept Armor","offers":[{"title":"Default Title","offer_id":42659094692011,"sku":"ADP-NVSTL-BCKLR","price":209.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1926\/7025\/files\/image-01_75bd3140-19fb-4f5e-851a-88f8eea32497.jpg?v=1779851268"},{"product_id":"adept-armor-novasteel-breastplate-ballistic-riot-armor","title":"Adept Armor Novasteel Breastplate Level IIIA Multi-Threat Body Armor Plate","description":"\u003cdiv class=\"rte\"\u003e\n\n\u003cp\u003eThe Adept Armor Novasteel Breastplate is a structural steel torso armor system rated to Level IIIA against handgun threats, Knife-3 and Spike-3 edged and spiked weapon threats, and blunt impacts well beyond 100 J — all in a single rigid shell under 0.1 inches thick. Two integrated bolt points accept purpose-built RF1 up-armor plates (sold separately), extending protection to rifle-level threats without replacing the base system. Available in size M (9 lbs, 13.8 x 12.5 in.) and L\/XL (9.8 lbs, 13.8 x 17 in.), in Black or Green, for chest circumferences from 35 to 47.5 inches.\u003c\/p\u003e\n\n\u003ch2\u003eWho this is for\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRiot and crowd-control officers\u003c\/strong\u003e who need a single torso protector that covers handgun, edged-weapon, spike, and blunt-impact threats without layering soft armor beneath standard riot gear.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePlainclothes and concealable-carry users\u003c\/strong\u003e who require Level IIIA coverage at the thinnest profile currently available — under 0.1 inches — with the added benefit of certified stab and spike resistance.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTactical personnel\u003c\/strong\u003e who want a scalable platform: the breastplate deploys as standalone IIIA armor today and up-armors to RF1 rifle protection in minutes with two bolts and no special tools.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eBallistic performance\u003c\/h2\u003e\n\u003cp\u003eThe NovaSteel Breastplate is constructed entirely from a proprietary NovaSteel alloy, which combines outstanding tensile strength and ballistic performance with formability. At under 0.1 inches thick, it is the thinnest Level IIIA armor currently produced. Backface deformation against common handgun threats — including 9mm FMJ — averages less than 10 mm, well inside NIJ limits.\u003c\/p\u003e\n\n\u003cp\u003eThe breastplate resists handgun threats to Level IIIA, knives to well beyond the Knife-3 standard, spikes to well beyond the Spike-3 standard, and blunt impacts to well beyond 100 J. A published test report covers a .44 Magnum 240-grain SJHP at the NIJ-required 1,430 ± 30 ft\/s. When fitted with the optional RF1 up-armor plates, the system adds rifle-level protection equivalent to NIJ Level III \/ RF1 threats.\u003c\/p\u003e\n\n\u003cp\u003eStandard riot armor — functionally equivalent to football or motocross protective gear — addresses blunt impact only. Officers who need broader coverage typically layer soft armor beneath it, adding thermal load, weight, and a logistical burden, while still leaving gaps in knife and spike protection. The Novasteel Breastplate eliminates all three of those gaps in a single shell that drops in as a direct replacement for conventional riot torso protectors.\u003c\/p\u003e\n\n\u003ch3\u003ePublished ballistic test data\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n\u003cth\u003eRound\u003c\/th\u003e\n\u003cth\u003eGrain\u003c\/th\u003e\n\u003cth\u003eRequired Velocity\u003c\/th\u003e\n\u003cth\u003eResult\u003c\/th\u003e\n\u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003e.44 Magnum SJHP\u003c\/td\u003e\n\u003ctd\u003e240 gr\u003c\/td\u003e\n\u003ctd\u003e1,430 ± 30 ft\/s\u003c\/td\u003e\n\u003ctd\u003eDefeated\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003ePlate compatibility and up-armor geometry\u003c\/h2\u003e\n\u003cp\u003eThe breastplate functions as a first-in-class rigid plate carrier with an integrated bolt-attachment system. Two bolt points per up-armor plate are pre-engineered into the shell; attachment requires only the two included bolts per plate and no special tools or training. Only the purpose-built RF1 up-armor plates (sold separately as a set of two for $650) are compatible — the attachment system and plate geometry are matched specifically to this breastplate and do not accept third-party inserts.\u003c\/p\u003e\n\n\u003cp\u003eRF1 up-armor plates weigh 1.7 lbs each. RF2-rated up-armor plates are in development. The breastplate can also be fitted with MOLLE placards for overt use as a structural plate carrier when mission requirements call for a more conventional loadout.\u003c\/p\u003e\n\n\u003ch2\u003eCare and lifespan\u003c\/h2\u003e\n\u003cp\u003eThe ballistic performance of the system is guaranteed for fifteen years. The straps are replaceable and carry a five-year guarantee. The NovaSteel alloy coating prevents rust. Performance is not affected by reasonable temperature extremes or humidity. In very cold climates, wear the breastplate over clothing rather than directly against bare skin.\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cdiv class=\"quick-answer\"\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Adept Armor\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e Novasteel Breastplate\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Proprietary NovaSteel alloy\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBallistic rating:\u003c\/strong\u003e Level IIIA (handgun); Knife-3 exceeded; Spike-3 exceeded; blunt impact beyond 100 J\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRifle up-armor:\u003c\/strong\u003e RF1 \/ Level III with optional integrated up-armor plates\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThickness:\u003c\/strong\u003e Under 0.1 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDimensions — M:\u003c\/strong\u003e 13.8 x 12.5 in.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDimensions — L\/XL:\u003c\/strong\u003e 13.8 x 17 in.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight — M:\u003c\/strong\u003e 9 lbs\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight — L\/XL:\u003c\/strong\u003e 9.8 lbs\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSizes:\u003c\/strong\u003e M (chest 35–39.5 in. \/ 89–100 cm); L\/XL (chest 40–47.5 in. \/ 101–120 cm)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eColors:\u003c\/strong\u003e Black, Green\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBallistic performance guarantee:\u003c\/strong\u003e 15 years\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStrap guarantee:\u003c\/strong\u003e 5 years (straps replaceable)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eVentilation:\u003c\/strong\u003e Integral air channels; raised crest for spine protection; heavily padded shoulders\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eFit and carrier compatibility\u003c\/h2\u003e\n\u003cp\u003eSizing is based on chest circumference measured at its widest point. Size M fits chests from 89–100 cm (35–39.5 in.); size L\/XL fits 101–120 cm (40–47.5 in.). The breastplate ships as a standalone torso protector. Shoulder armor plates ($245, sold separately) and RF1 up-armor plates ($650, sold separately) ship on longer lead times. MOLLE placards are available separately for users who want a conventional plate-carrier interface. Contact us if you need help selecting the right size or accessory configuration.\u003c\/p\u003e\n\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\n\u003ch3\u003eWhat rounds does the Novasteel Breastplate stop?\u003c\/h3\u003e\n\u003cp\u003eIn its base configuration, the breastplate stops handgun threats to Level IIIA — including .44 Magnum 240-grain SJHP at 1,430 ft\/s, which is the most demanding NIJ IIIA handgun test round. It also exceeds the Knife-3 and Spike-3 edged-weapon standards and blunt impacts beyond 100 J. With the optional RF1 up-armor plates bolted in, it additionally handles Level III \/ RF1 rifle threats.\u003c\/p\u003e\n\n\u003ch3\u003eWhat is the difference between the base breastplate and the RF1 up-armored configuration?\u003c\/h3\u003e\n\u003cp\u003eThe base breastplate provides Level IIIA, Knife-3+, Spike-3+, and 100 J+ blunt protection with no additional hardware. Adding the two RF1 up-armor plates (bolted to the inside of the breastplate with the included bolts) extends coverage to rifle threats at Level III \/ RF1. The up-armor plates weigh 1.7 lbs each and the upgrade takes only a few minutes with no special tools.\u003c\/p\u003e\n\n\u003ch3\u003eAre third-party plates compatible with the breastplate's bolt system?\u003c\/h3\u003e\n\u003cp\u003eNo. Only the purpose-built Adept Armor RF1 up-armor plates are compatible. The attachment system and plate geometry are engineered specifically for this breastplate and do not accommodate other inserts.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this compare to standard riot armor?\u003c\/h3\u003e\n\u003cp\u003eStandard riot armor is rated for blunt impact only — comparable to motocross or football protective gear. It offers no ballistic or edged-weapon protection. Officers needing that coverage typically layer soft armor panels underneath, adding heat, weight, and logistics complexity while still leaving knife gaps. The Novasteel Breastplate replaces all of that with a single shell that covers the full threat spectrum.\u003c\/p\u003e\n\n\u003ch3\u003eHow long does the armor remain serviceable?\u003c\/h3\u003e\n\u003cp\u003eThe ballistic performance of the system is guaranteed for fifteen years. The straps carry a five-year guarantee and are user-replaceable. The NovaSteel alloy coating prevents corrosion, and performance holds across reasonable temperature and humidity extremes.\u003c\/p\u003e\n\n\u003ch3\u003eCan this armor be shipped to my state?\u003c\/h3\u003e\n\u003cp\u003eIt cannot be shipped to New York or Connecticut due to state body armor restrictions, and is subject to US export regulations. Under 18 U.S.C. § 931, anyone with a federal felony conviction for a crime of violence is prohibited from purchasing or possessing body armor.\u003c\/p\u003e\n\n\u003c\/div\u003e","brand":"Adept Armor","offers":[{"title":"M","offer_id":43254426271915,"sku":"ADP-NVSTL-BRSTPLT-BUNDLE-M","price":589.99,"currency_code":"USD","in_stock":true},{"title":"L\/XL","offer_id":43254426304683,"sku":"ADP-NVSTL-BRSTPLT-BUNDLE-L\/XL","price":589.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1926\/7025\/files\/image-01_c03f12d9-093d-403e-ab10-2e3858bc4cb4.jpg?v=1779851680"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1926\/7025\/collections\/adept-armor-179499.jpg?v=1737706649","url":"https:\/\/bulletproofzone.com\/collections\/adept-armor\/tier3.oembed","provider":"Bulletproof Zone","version":"1.0","type":"link"}